Xmotorstore Payments
Reference: 5006
Brand: STAMAS
Front hub Stamas factory including spacer and bearings.
Reference: KOYO 60002
KOYO racing minimoto wheel bearings 10x26x8, compatible with all minimoto bikes. The high-speed wheel bearings for minimoto allow you to improve the sliding of the minimoto when cornering.
Reference: 7009
Brand: STAMAS
Pair of aluminum spacers for fixing the air motor head on Stamas minimoto
Reference: FM6005-DMT
Brand: Formula
Radial front Formula braking system for minibikes. Pads are included in the brake kit. The most used braking system on minibikes, such as Dm, Stamas, Grc, Blata. Minibike front brake suitable for racing and training, maximum performance and reliability Code: FM6005-DMT. New version with increased pump and 2024 caliper in black colour. The Formula minibike...
Reference: 045
Brand: DM
Gas wire and sheath for Phbg carburetor and quick throttle control.
Reference: IMC-40100
Brand: CS Racing
Coupling axis 14/5 x 32.3 connecting rod Cs
Reference: 143.000.260
Brand: POLINI
Minimoto Polini 910 fairing S engine 6.2 hp Polini single-cylinder 2-stroke engine - aluminum cylinder Bore x stroke: 36 x 39 Displacement 36.69 cc Compression ratio: 16.2: 1 Carburetor: SHA 14-14 Ignition: Inductive discharge electronic Fuel: Unleaded petrol with 2% synthetic oil Intake: With reed valve in the crankcase Starting: Tear-off with...
Reference: FM40026-20
Brand: Formula
Formula 11mm diameter front pump piston kit. Formula Code: FM40026-20
Reference: 143.340.049
Brand: POLINI
Rear brake support bracket right Polini GP5. Polini code: 143.340.049
Reference: 001002R07300
Brand: DM
Fuel tap for DM minibike, for 4/6 mm hose, m10x1 thread. The minibike fuel tap is applied directly to the frame in the appropriate support (DM minibike). Thanks to its small size, the minibike fuel tap can be easily applied anywhere on the minibike. DM code: 001002R07300 Attention: does not include the nut.
Reference: 102B
Brand: DM
Dm Junior 2025 minimoto set-up variators New Dm set-up variators for Junior riders. This 2025 update of the Dm minimoto improves the handling of the chassis thanks to the specific set-up position for Junior riders.
Reference: ia3994
Brand: Tecnominimoto
Round head piston complete with segment and pin. Technical features: Aluminum with a high percentage of silicon to ensure high resistance to heat. Non-deformable due to temperature variations and corrosion on the piston crown. Graphite coating that guarantees a low coefficient of friction and running-in. Crowned roof reinforced to withstand the stresses...
Reference: 6008/12
Brand: STAMAS
Stamas rear fender sr r factory. Code: 6008/12
Reference: TCM/BZM 50 H20
Brand: Tecnominimoto
Minibike engine gasket kit BZM, TCM 50cc H2o. Complete kit of gaskets for 50cc minimoto Bzm and Tecnomoto engines.
Reference: GHR 501.002
Brand: GHR
40cc air Ghr engine (without carburetor and filter). 40cc air Ghr engine including complete marmiatta, the engine does not include the carburetor. Ghr minimoto engine complete with muffler, silencer. Ghr motor available with 10/12/14/15 flange or with flange. At the time of purchase, insert the desired flange in the notes.
Reference: 001002R06100
Brand: DM
DM transparent minibike fairing, compatible with original DM fairings. DM code: 001002R06100 Attention: The color may vary according to the production lot and the constructive choice of the manufacturer.
Reference: 112.485.00
Brand: GRC
Minibike work stand GRC. High stand, to work on the GRC minibike, the stand is dismountable, to be transported comfortably. The GRC stand is compatible with all GRC minibikes. Stand complete with shelf to rest objects. Black and red color.
Reference: ALB053
Brand: CS Racing
Lightweight pin for Iame piston 40cc / 50cc 10x30x6 (40cc) 10x33x6 (50cc)
Distance internal front hub Stamas factory
