Rods and spare parts clutch Polini minibike 260.018

Reference: 143.761.001

Brand: POLINI

Complete Polini Fuel tap 143.761.001

Complete Polini petrol tap. Code: 143.761.001

Reference: 001002SP0110

Brand: DM

Pump pulley d. 100 lightened DM

New DM pulley at the hub for water pump transmission diameter 100 lightened, or free. DM pulley sizes: internal diameter 45 mm, external diameter 100 mm, thickness 8.5 mm on the hub, external thickness 7 mm, OR channel 3 mm.

Reference: MAS.HM3

Brand: CS Racing

clutch shoes Cs racing EPIC HAMMER 2.0

Pair of weights for EPIC HAMMER 2.0 two-mass clutches New HAMMER 2.0 clutches born from the experience of our technicians directly from the most important competition fields, it has immediately become an irreplaceable tool !!! Precisely this experience of ours in the world of race minibikes and beyond ... always leads us towards a continuous evolution and...

Reference: 9005 L

Brand: STAMAS

Brackets side radiator race Stamas

Side brackets radiator support Stamas race

Reference: FRZ.HM2

Brand: CS Racing

HAMMER GP Cs racing clutch

Clutch Cs minimoto HAMMER GP. Clutch for minimoto compatible with Cs, Iame, Ghr, Bzm engines. This clutch must be used with an 81mm bell. Cs clutch models: - HAMMER GT Low friction coefficient, allows greater slip without affecting performance - HAMMER GP Medium-high friction coefficient - HAMMER EPIC High Coefficient

Reference: DD.VF.MIN

Brand: XRACING

Nut clutch/flywheel

Clutch nut / minimoto flywheel, compatible with engine: Polini, Cs, Ghr, Bzm.

Reference: GHR 510.001

Brand: GHR

Head washers kit Ghr 40cc air

Head washers kit Ghr 40cc air. Ghr cylinder squish kit. (5 pz.)

Reference: 2018

Brand: STAMAS

Stamas front fender support brackets

Torque support bracket front fender Stamas

Reference: 143.395.015

Brand: POLINI

Minibike Polini front brake wire 143.395.015

Polini minibike front brake wire, for mechanical brakes. Polini code: 143.395.015

Reference: 001002A00800

Brand: DM

Spacer plus screw on the clutch side Dm

Spacer plus screw on clutch side Dm. The spacer is used to maintain the distance between the pedal and the pinion in the event of a fall, thus preventing the pinion from breaking.

Reference: 001002SP1280

Brand: DM

Kit factory Dm stickers

Dm factory minimoto stickers kit. Graphic version for official Dm minibike. ATTENTION: THE STICKERS CAN BE MODIFIED BY DM TELAI WITHOUT NOTICE FOR BETTER AESTHETICS AND/OR SPONSOR NEEDS, XMOTORSTORE IS COMMITTED TO ALWAYS PROVIDE THE MOST UPDATED VERSION.

Reference: 143.600.001

Brand: POLINI

Polini minimoto high voltage coil 143.600.001

High voltage Polini minimoto coil, suitable for 4.2 and 6.2 Polini engines. Polini Code: 143.600.001

Reference: Vaschetta-uni-red

Brand: XRACING

Minimoto water tank in red ergal

Minimoto water tank in red ergal. Xmotorstore presents its new product: Radiator water tank entirely machined from solid and anodized in red, particular attention has been paid to heat dissipation, thanks to the external grooves that allow easy cooling. Technical characteristics of the water tank: External diameter: 32 mm. Internal diameter: 22.5 mm....

Reference: F00 005

Brand: DM

Lightened rear hub 114 mm DM ( for hydraulic brake )

Rear hub dm for hydraulic brake Formula Lightened rear hub 114 mm DM weight 190g THE HUB DOES NOT INCLUDE THE BEARINGS

Reference: 4013

Brand: STAMAS

Bracket for steel brake caliper Stamas

Bracket for steel brake caliper Stamas 

Reference: Kit-revisione-fg-gubellini

Fg Gubellini minibike steering damper overhaul kit

Fg Gubellini minibike steering damper overhaul kit. Kit for overhauling the steering damper for minibikes, consisting of: Complete OR kits. Oil seal kit. Specific hydraulic oil for steering damper. Attention: photo purely illustrative, the actual kit differs from the images. Attention: we recommend contacting a specialized workshop to assemble the kit.