- New product
- -10%
- On sale!

Xmotorstore Payments
Pair of Dm aluminum handlebars plus cnc clamps diameter 25 mm. For 25mm forks.
Reference: 053
Brand: DM
Universal Dual Cable mini-bike off button, compatible with all mini-bikes. This switch can be installed on any handlebar with a diameter of 22 mm 7/8 inches, it is effective for turning off the minimoto with a simple button. Cable length 80cm. Cables already prepared for Selettra and Polini minibike coil attachment.
Reference: A02041C4240A7-1
Brand: Domino
Domino enduro universal motorcycle grips, compatible with motorcycles, scooters, minimoto, pitbike, and others. Internal diameter on the throttle side 24 mm Handlebar side internal diameter 22 mm
Reference: A26041C4852A7-0
Brand: Domino
Domino off road A260 grips. Pair of two-component thermoplastic rubber knobs. Coarse multi-pyramidal finish to facilitate off-road grip Grooves for wire. Material: Two-component thermoplastic rubber Length: 120 mm End: Closed Handlebar / Gas tube diameter: 22/26 mm Grooves for iron wire: 3 slots Flange diameter: 60 mm Handle diameter Knob mounted: 29 /...
Reference: 112.103.20
Brand: GRC
Complete rear Grc hub 114mm with screws for hydraulic brake
Reference: M40ENGFA
Brand: IAME CS
40cc air-cooled CS racing engine. The engine includes, standard shaft, purple bell crankcase, 81mm cs bell, complete clutch, iame starter. Carburetor and exhaust are excluded. The engine can be mounted on mini bikes Dm, Stamas, Grc, Polini, Blata. The engine is available in the following versions: CS racing motor flange 10 mm CS racing engine 12 mm...
Reference: tcm2004
Brand: Tecnominimoto
Minimoto head support compatible with engines: Bzm Tecnominimoto Orioli. The head support includes the silentblock.
Reference: 2019
Brand: STAMAS
25 mm racing half handlebar with Stamas cnc bracelet
Reference: 001002SP0110
Brand: DM
New DM pulley at the hub for water pump transmission diameter 100 lightened, or free. DM pulley sizes: internal diameter 45 mm, external diameter 100 mm, thickness 8.5 mm on the hub, external thickness 7 mm, OR channel 3 mm.
Reference: 2012 I
Brand: STAMAS
Pair of Stamas factory mini fork tubes diameter 25 mm in stainless steel.
Reference: 112.486.15
Brand: GRC
Wrench to assemble and disassemble the 6/7/8-tooth minimoto sprocket. Compatible with all minimoto sprockets.
Reference: 059
Brand: DM
Pair of bearings with spacer For hub 116 mm minimoto DM.
Reference: 143.710.004
Brand: POLINI
Steel gp4 adjustable steering switch
Reference: 074
Brand: DM
Replacement Quick Coupling Front Fairing
Reference: 143.310.003
Brand: POLINI
Polini clutch nut for reverse engine Polini clutch nut for: Polini minibike spare parts
Reference: 143.000.260
Brand: POLINI
Minimoto Polini 910 fairing S engine 6.2 hp Polini single-cylinder 2-stroke engine - aluminum cylinder Bore x stroke: 36 x 39 Displacement 36.69 cc Compression ratio: 16.2: 1 Carburetor: SHA 14-14 Ignition: Inductive discharge electronic Fuel: Unleaded petrol with 2% synthetic oil Intake: With reed valve in the crankcase Starting: Tear-off with...
Reference: NSK 6003V
Brand: XRACING
NSK racing high speed minimoto bell bearing, this bearing allows the bell to slide at very high speed without altering its stability, improving the performance of the clutch. Compatible with bell casings Cs, Iame, Bzm, Polini, Ghr, Xracing and others. Code: NSK 6003V Inner diameter: 17 mm External diameter: 35 mm Thickness: 10 mm
Reference: 143.034.001
Brand: POLINI
Polini engine set gaskets 4,2 hp
Pair of Dm aluminum handlebars plus cnc clamps diameter 25 mm. For 25mm forks.