Flows Cs (oval tond 21 15)

Reference: GHR 025.001

Brand: GHR

Shim shaft Ghr

Ghr crankshaft shims (2 pieces).

Reference: Ghr-marmitta-completa-40-air

Brand: GHR

Ghr complete muffler for air engines (flange 10 and 12)

Complete GHR exhaust system for 40cc 2-stroke air-cooled minimoto engines. Available with 10 mm flange, 12 mm flange, or for flange-less cylinders. 100% Made in Italy.

Reference: 2009

Brand: STAMAS

24 mm half handlebar with Stamas bracelet

Semi handlebar 24 mm with Stamas bracelet, 1 piece. Fork stem clamp diameter: 24mm. Semi handlebar diameter: 22mm standard.

Reference: 5013

Brand: STAMAS

Pulley rear hub Stamas

Stamas rear hub pulley for water pump drive belt.

Reference: 2012 I

Brand: STAMAS

Pair fork Stamas factory mini d.25 inox

Pair of Stamas factory mini fork tubes diameter 25 mm in stainless steel.

Reference: 4014

Brand: STAMAS

Cnc support for rear brake caliper mechanical factory Stamas

Cnc support for rear brake caliper mechanical factory Stamas 

Reference: 053

Brand: DM

Engine stop minimoto double cable

Universal Dual Cable mini-bike off button, compatible with all mini-bikes. This switch can be installed on any handlebar with a diameter of 22 mm 7/8 inches, it is effective for turning off the minimoto with a simple button. Cable length 80cm. Cables already prepared for Selettra and Polini minibike coil attachment.

Reference: 213.0017

Brand: POLINI

Reed valve Polini 4.2 hp minimoto engine 213.0017

Reed valve Polini 4.2 hp minimoto engine. Polini Code: 213.0017

Reference: 123A

Brand: DM

Minimoto Dm Junior 2025 footpeg supports

Minimoto Dm Junior 2025 footpeg supports New Dm footpeg supports for Junior riders. This 2025 update of the Dm minimoto improves the handling of the chassis thanks to the specific foot position for Junior riders.

Reference: Avv-mini-cina-metallo

Chinese minimoto starter gear

Chinese minimoto starter gear. Universal Chinese mini motorcycle starter metal gear, the metal gear allows you to avoid damage to the starter during starting, and extends its life.

Reference: 143.070.002

Brand: POLINI

Minimoto carter engine 6,2 hp Polini 143.070.002

Pair of Polini 6.2 hp minibike engine casings. Polini code: 143.070.002

Reference: GHR 002.001

Brand: GHR

Ghr 50cc h2o cylinder

Ghr cylinder diameter 40 mm, displacement 50cc h2o. Cylinder Ghr 50cc h2o 2-stroke engine.

Reference: 143.145.005

Brand: POLINI

Clutch bell reverse engine minimoto Polini 143.145.005

Clutch bell reverse engine minimoto Polini 143.145.005

Reference: TCM120

Brand: Tecnominimoto

TCM junior minimoto exhaust for 10 and 12 mm flanged engines

TCM junior minimoto exhaust for 10 and 12 mm flanged engines. Tecnomoto junior minimoto muffler for flanged 10 and 12 mm with non-decomposable manifold. Complete exhaust for minimoto with junior engine for 40cc 2t air-cooled engines, with 10 and 12 mm flange. Muffler compatible with: TCM / BZM / OR / POLINI / MALOSSI / ZOCCHI.

Reference: 143.415.006

Brand: POLINI

Fork plates Polini 910 RS 143.415.006

Polini 910 RS minimoto fork plates. Fork plates 2WB for straight steerer. Polini Code: 143.415.006 Polini minimoto fork plates in aluminum. Color: gray Total width: 170 mm. Hole diameter for stem: 24 mm. Steering stem pin diameter: 10 mm. Fork stem center distance: 134 mm. The kit includes the necessary screws for assembly.

Reference: 001002R002B0

Brand: DM

Spacer conical crown side Dm

Conical spacer on the crown side DM, the spacer must be inserted between the swingarm and the wheel bearing with the diameter of the narrowest cone towards the bearing. The wheel spacer Dm has the following measures: Hole diameter 10 mm Outside diameter 24 mm Outside diameter narrow part 15 mm Spacer thickness 10 mm Dm code: 001002R002B0