Xmotorstore Payments
Water temperature sensor 1/8 GAS 40 cm A2153. This 1 / 8GAS threaded thermocouple K-technology sensor can be connected to the motor head if the motor has a hole designed to install this sensor.
Note: This sensor must be used with an A3401 extension cable or A2190 hub.
Water temperature sensor 1/8 GAS 40 cm A2153. This 1 / 8GAS threaded thermocouple K-technology sensor can be connected to the motor head if the motor has a hole designed to install this sensor.
Note: This sensor must be used with an A3401 extension cable or A2190 hub.
Reference: FM10022-10
Brand: Formula
Formula axial caliper for minibikes and minicross. Pads included. 5 mm tube ring connection. Distance between fixing holes: 55 mm. Caliper thickness: 42 mm.
Reference: 1613525
Brand: Malossi
Malossi fuel system phbg 21 bs 1613525 Malossi code: 1613525 Malossi phbg 21 bs fuel system with direct starter and reed valve Application: Malossi fuel system for APRILIA RS 50 2T LC euro 4 2018-> (D50B0) Malossi fuel system for APRILIA RX 50 2T LC 2007-> (DERBI D50B0) Malossi fuel system for APRILIA RX FACTORY 50 2T LC euro 4 2018-> (D50B0)...
Reference: 01.SZ.0413.L
Brand: Ohvale
Ohvale Out case assembly clutch Code: 01.SZ.0413.L
Reference: 3214843B
Brand: Malossi
DB Killer Malossi 3214843B Code: 3214843B To further increase the performance of the approved RX mufflers, this DB killer is available which, while not complying with the European homologation, keeps the noise level within acceptable limits.
Reference: 5715844
Brand: Malossi
Complete engine casing Malossi Mhr C-One 5715844 Code: 5715844 Complete crankcase for Piaggio engine, for all scooters that are fitted with the Piaggio 50 2T LC engine as original equipment. MHR C-one has been designed and prepared for: - Fit both the drum brake and disc brake solution. -Be mounted to replace the original motor with both short and long...
Reference: 206.0058
Brand: POLINI
Polini segment diameter 46.8x1.5 mm 206.0058 Polini segment for: Garelli, Garelli Noi 50 Matic, Garelli Vip 1, Garelli Vip 2, Garelli Vip 3, Garelli Vip 4, Honda, Honda Wallaroo 50, Peugeot, Peugeot 103, Peugeot 104, Peugeot 105, Peugeot Fox 50, Peugeot GL 10, Peugeot 103 SPX 50, Piaggio, Piaggio Bravo, Piaggio CBA, Piaggio Ciao, Piaggio Eco, Piaggio Si,...
Reference: 6118612
Brand: Malossi
Malossi OVER RANGE complete transmission group for Kymco AK 550 engines Malossi code: 6118612 Malossi transmission group for KYMCO AK 550 ie 4T LC euro 4 2017 (SAA1). Malossi transmission group for KYMCO AK 550 ie 4T LC euro 5 2021 (SBA1). Malossi transmission group for KYMCO AK Premium 550 ie 4T LC euro 5 2023 (SBA1B).
Reference: 144.695.005
Brand: POLINI
Polini 3G clutch spring adjustment wrench. Polini Code: 144.695.005
Reference: 200.2023/S
Brand: POLINI
Polini muffler for Vespa Pe 200 with aluminum silencer. Polini Code: 200.2023 / S. The Polini 200.2023 / S muffler is compatible with: VESPA 200 2T PE, PX
Reference: 4917552
Brand: Malossi
Complete C-One 70cc Malossi 4917552 engine for Piaggio engine Malossi code: 4917552 Complete C-One 70cc engine. Engine not assembled. For Piaggio engine, 12/13 wheel.
Reference: Hjc C50 Mecha Beast
Brand: HJC
HJC C50 Mecha Beast Helmet HJC C50 Mecha Beast Off-Road Helmet. Advanced Polycarbonate Composite: By blending high-quality polycarbonate with high-impact ABS in an optimal ratio, HJC has developed a strong, impact-resistant shell while maintaining a lightweight design. Wind Tunnel Tested "ACS" Advanced Channeling Ventilation System: Full front-to-back...
Reference: 01.AS.0131.L
Brand: Ohvale
Ohracing fork protection ring for Ohvale. Original spare part to protect fork legs from wear and impact. Code 01.AS.0131.L.
Reference: 143.804.036
Brand: POLINI
Polini 910 minimoto chain cover, protects pinion, crown and chain. Polini Code: 143.804.036
Reference: 01.CV.0011.L
Brand: Ohvale
Ohvale left stand replacement fork. Ohvale code: 01.CV.0011.L Replacement for Ohvale GP-0 and GP-2 rear stand.
Reference: 61 7161B
Brand: Malossi
Malossi mobile half-pulley for MULTIVAR variator Malossi code: 61 7161B
Water temperature sensor 1/8 GAS 40 cm A2153. This 1 / 8GAS threaded thermocouple K-technology sensor can be connected to the motor head if the motor has a hole designed to install this sensor.
Note: This sensor must be used with an A3401 extension cable or A2190 hub.
