Xmotorstore Payments
Domino D-lock grips with ring nuts. Domino presents the D-Lock, the new Domino brand knobs with the «Lock On» fixing system. They allow practical and quick assembly, without the use of glue, wire or compressed air - on both sides, thanks to the D-Lock ring.
Tested on the track and highly appreciated by Yamaha, KTM, Betamotor and Kawasaki riders, they are the result of Domino's unique experience and expertise.
The single-color D100s are now available in 5 different colors: black, gray, orange, red and blue.
Available:
D10046C4200A9-0 RED D-LOCK GRIPS LOCK ON / WITH RING NUTS
D10046C4000A9-0 BLACK D-LOCK GRIPS LOCK ON / WITH RING NUTS
D10046C4500A9-0 D-LOCK ORANGE GRIPS LOCK ON / WITH RING NUTS
D10046C4800A9-0 D-LOCK BLUE LOCK ON / WITH RING KNOBS
D10046C5200A9-0 GRAY D-LOCK GRIPS LOCK ON / WITH RING NUTS
Pair of D-Lock knobs with «Lock-On» fixing system.
Equipped with 4 interchangeable rings for installation on specific KTM, Husqvarna, GASGAS, Honda, Kawasaki, Suzuki, Yamaha models.
"HIGH GRIP" technology
knurling that maximizes grip in every direction and facilitates cleaning of the knob
Optimal adherence between the grips and the glove
Support Pad Design and Three Clamp Waffle
Material: Thermoplastic rubber
Black colour
Handlebar diameter: 22 mm
Length: left 125 mm / right 130 mm
Knobs length: 116 mm
End: Closed
Flange diameter: 61.5mm
Handle diameter: 30 mm
Pair of D-Lock knobs with «Lock-On» fixing system.
Equipped with 4 interchangeable rings for installation on specific KTM, Husqvarna, GASGAS, Honda, Kawasaki, Suzuki, Yamaha models.
"HIGH GRIP" technology
knurling that maximizes grip in every direction and facilitates cleaning of the knob
Optimal adherence between the grips and the glove
Support Pad Design and Three Clamp Waffle
Material: Thermoplastic rubber
Black colour
Handlebar diameter: 22 mm
Length: left 125 mm / right 130 mm
Knobs length: 116 mm
End: Closed
Flange diameter: 61.5mm
Handle diameter: 30 mm
Reference: 5512789
Brand: Malossi
Malossi electronic control unit 5512789 Code: 5512789 Malossi electronic control unit for I cylinders - tech
Reference: IM 07072C4
Brand: C4
Crankshaft Mbk Booster X, Ovetto 4T 50cc
Reference: 8.479.899.790
Brand: ZECA
With the ZECA EV cable reels with wallbox it is possible to recharge electric vehicles with minimal effort, keeping the garage tidy and protecting the cables from wear. Available with Type 1 and Type 2 connectors The Type 1 connector is the North American and Japanese standard, but is very widespread on vehicles (it is not usually installed on charging...
Reference: 01.OT.0615.L
Brand: Ohvale
Ohvale OR 2075 Viton preload kit for Gp-0 Gp-2 Code: 01.OT.0615.L
Reference: 211.0294
Brand: POLINI
Polini cylinder head diameter 47 mm. Polini head for Piaggio Zip. Polini Code: 211.0294
Reference: 7009
Brand: STAMAS
Pair of aluminum spacers for fixing the air motor head on Stamas minimoto
Reference: 243.080
Brand: POLINI
Polini contrast spring for Yamaha, Sym, Kymco Code: 243.080 Application: Yamaha, Yamaha T Max 500 Injection (04/07) / 500 Carburetor (01/03) / 500 Injection (08/11) / 530 ie from 2012 to 2016/530, DX, SX ie E4 from 2017/560 Euro 5 from 2020, Kymco, Kymco AK 550 E4 from 2017, Sym, Sym Maxsym TL 500 from 2020
Reference: 143.000.250
Brand: POLINI
Minimoto Polini 910 RS fairing with 4.2 hp air-cooled engine, 6.5-inch rims. Polini engine: 2 T single cylinder - Aluminum cylinder Bore x stroke: 36 x 39 Displacement: 36.69 Compression ratio: 16.2: 1 Carburetor: SHA 14-14 Ignition: Inductive discharge electronic Fuel: Unleaded petrol with 2% synthetic oil Intake: With reed valve in the crankcase...
Reference: 2513879B
Brand: Malossi
Malossi roller guide cap for variator 2513879B Malossi code: 2513879B Malossi roller guide cap for Multivar variator 2513879B.
Reference: 3217321B
Brand: Malossi
Belly exhaust Malossi 3217321B racing Mhr C-one Yamaha Code: 3217321B Malossi exhaust belly for Mhr C-one Yamaha racing scooters with 52 diameter
Reference: 3215113B
Brand: Malossi
Malossi 3215113B exhaust manifold for Rx muffler Code: 3215113B Malossi exhaust manifold for Rx muffler
Reference: Sel.Blu.2022
Brand: CS Racing
Minimoto Selettra coil, blue color, with CIV 2024 marking. This coil is compatible with Cs, Iame, Ghr, Bzm, Zocchi, Tcm, Beast. The coil is marked CIV 2024, to be used in the Italian minimum championship, and FMI races. Selettra 3500 minimoto coil assembly features: The distance between the holes of the blue coil is 52 mm, the holes are 6 mm. ATTENTION:...
Reference: Bms-P2-usate
Brand: XRACING
Pair of used frame plates for BMS P2 minimoto. Original BMS parts in good condition, ideal for replacement or spare use.
Reference: 001002SP1280
Brand: DM
Dm factory minimoto stickers kit. Graphic version for official Dm minibike. ATTENTION: THE STICKERS CAN BE MODIFIED BY DM TELAI WITHOUT NOTICE FOR BETTER AESTHETICS AND/OR SPONSOR NEEDS, XMOTORSTORE IS COMMITTED TO ALWAYS PROVIDE THE MOST UPDATED VERSION.
Reference: 143.034.002
Brand: POLINI
6.2 hp engine gasket kit Polini. Gaskets for 6.2 hp engine air and liquid minimoto. Minimoto Polini engine Gasket kit. Polini code: 143.034.002
Domino D-lock grips with ring nuts. Domino presents the D-Lock, the new Domino brand knobs with the «Lock On» fixing system. They allow practical and quick assembly, without the use of glue, wire or compressed air - on both sides, thanks to the D-Lock ring.
Tested on the track and highly appreciated by Yamaha, KTM, Betamotor and Kawasaki riders, they are the result of Domino's unique experience and expertise.
The single-color D100s are now available in 5 different colors: black, gray, orange, red and blue.
Available:
D10046C4200A9-0 RED D-LOCK GRIPS LOCK ON / WITH RING NUTS
D10046C4000A9-0 BLACK D-LOCK GRIPS LOCK ON / WITH RING NUTS
D10046C4500A9-0 D-LOCK ORANGE GRIPS LOCK ON / WITH RING NUTS
D10046C4800A9-0 D-LOCK BLUE LOCK ON / WITH RING KNOBS
D10046C5200A9-0 GRAY D-LOCK GRIPS LOCK ON / WITH RING NUTS
Pair of D-Lock knobs with «Lock-On» fixing system.
Equipped with 4 interchangeable rings for installation on specific KTM, Husqvarna, GASGAS, Honda, Kawasaki, Suzuki, Yamaha models.
"HIGH GRIP" technology
knurling that maximizes grip in every direction and facilitates cleaning of the knob
Optimal adherence between the grips and the glove
Support Pad Design and Three Clamp Waffle
Material: Thermoplastic rubber
Black colour
Handlebar diameter: 22 mm
Length: left 125 mm / right 130 mm
Knobs length: 116 mm
End: Closed
Flange diameter: 61.5mm
Handle diameter: 30 mm
