- Reduced price
- New
Xmotorstore Payments
Domino D-lock grips with ring nuts. Domino presents the D-Lock, the new Domino brand knobs with the «Lock On» fixing system. They allow practical and quick assembly, without the use of glue, wire or compressed air - on both sides, thanks to the D-Lock ring.
Tested on the track and highly appreciated by Yamaha, KTM, Betamotor and Kawasaki riders, they are the result of Domino's unique experience and expertise.
The single-color D100s are now available in 5 different colors: black, gray, orange, red and blue.
Available:
D10046C4200A9-0 RED D-LOCK GRIPS LOCK ON / WITH RING NUTS
D10046C4000A9-0 BLACK D-LOCK GRIPS LOCK ON / WITH RING NUTS
D10046C4500A9-0 D-LOCK ORANGE GRIPS LOCK ON / WITH RING NUTS
D10046C4800A9-0 D-LOCK BLUE LOCK ON / WITH RING KNOBS
D10046C5200A9-0 GRAY D-LOCK GRIPS LOCK ON / WITH RING NUTS
Pair of D-Lock knobs with «Lock-On» fixing system.
Equipped with 4 interchangeable rings for installation on specific KTM, Husqvarna, GASGAS, Honda, Kawasaki, Suzuki, Yamaha models.
"HIGH GRIP" technology
knurling that maximizes grip in every direction and facilitates cleaning of the knob
Optimal adherence between the grips and the glove
Support Pad Design and Three Clamp Waffle
Material: Thermoplastic rubber
Black colour
Handlebar diameter: 22 mm
Length: left 125 mm / right 130 mm
Knobs length: 116 mm
End: Closed
Flange diameter: 61.5mm
Handle diameter: 30 mm
Pair of D-Lock knobs with «Lock-On» fixing system.
Equipped with 4 interchangeable rings for installation on specific KTM, Husqvarna, GASGAS, Honda, Kawasaki, Suzuki, Yamaha models.
"HIGH GRIP" technology
knurling that maximizes grip in every direction and facilitates cleaning of the knob
Optimal adherence between the grips and the glove
Support Pad Design and Three Clamp Waffle
Material: Thermoplastic rubber
Black colour
Handlebar diameter: 22 mm
Length: left 125 mm / right 130 mm
Knobs length: 116 mm
End: Closed
Flange diameter: 61.5mm
Handle diameter: 30 mm
Reference: 2915602
Brand: Malossi
Malossi RACING spring set for original clutch for Kymco and YamahaMalossi code: 2915602 Original clutch springs in pre-hardened carbon steel with high yield strength, protected by a high heat resistance galvanic treatment. The different color highlights the load of each series of springs. This spring kit allows you to increase the clutch attachment speed...
Reference: 282.0008
Brand: POLINI
Polini crankshaft overhaul kit Piaggio Ciao. Polini code: 282.0008. Piaggio Ciao crankshaft overhaul kit, Si, consisting of bearings and dedicated oil seal. Polini kit compatibility for Ciao: Piaggio Ciao crankshaft overhaul kit. Piaggio Si crankshaft overhaul kit. Piaggio Boxer crankshaft overhaul kit. Piaggio Bravo crankshaft overhaul kit. Piaggio...
Reference: 01.PE.0016.B
Brand: Ohvale
Black shift lever for Ohvale GP-0 and GP-2. Fits all geared models from 2025 onward. Original part – Code 01.PE.0016.B.
Reference: 203.1505
Brand: POLINI
Venturi Polini 70mm for PWK 24/26/28/30 carburetor. Polini Code: 203.1504
Reference: EK415SH 140
Brand: EK (Enuma Chain)
Motorcycle chain EK 415SH 140 links. Motorcycle chain step 415 of 140 links with SPJ joint (Clip joint).
Reference: 209.0404
Brand: POLINI
Gasket set Kymco Sniper 50cc 209.0404
Reference: X-graphics-ghr-dm
Brand: XRACING
Minibike adhesive graphics DM 2023. Are you looking for a simple solution to customize your pocket bike? The Dm adhesive graphics for minibikes are easy to apply and resistant. Possibility of modifications on request of the pilot number. The waiting time may vary depending on the modification requested. Attention: Fluorescent colors have a natural...
Reference: 6118485
Brand: Malossi
Complete Malossi transmission group 6118485 Code: 6118485 Complete transmission group Malossi Over Range Mhr next Yamaha T Max 530 cc This new system is based on the new Multivar MHR Next variator, which, combined with the other components, allows to achieve truly unique performances! The torque driver (mobile pulley) has a larger diameter than the...
Reference: 144.763.003
Brand: POLINI
Polini minicross right footboard 144.763.003
Reference: 03.IF.0013.L
Brand: Ohvale
Ohvale Rear brake hose Code: 03.IF.0013.L
Reference: EK428SROZ140
Brand: EK (Enuma Chain)
Motorbike chain step 428 model EK428SROZ140. EK chain EK428SROZ140 SROZ Series Formed by 140 links with 428 pitch suitable for motorcycles with maximum displacement of: 200/250 cc combined with SKJ joint (Clip joint).
Reference: 170.2040
Brand: POLINI
Polini water pump for Honda Camino 50, code 170.2040 Polini water pump for: Honda, Honda Camino 50
Reference: 01.PE.0016.L
Brand: Ohvale
Ohvale GP-0 and GP-2 shift lever. Ohvale code: 01.PE.0016.L Ohvale Gp-0 shift lever. Ohvale Gp-2 shift lever.
Reference: V10-Stuart-Minions
Brand: HJC
HJC V10 Stuart Minions Helmet. HJC V10 Stuart Minions Special Edition Helmet. Lightweight, ECE 22.06 certified, featuring advanced technology and superior comfort. Playful styling with official Minions graphics.
Reference: 215.0444
Brand: POLINI
Polini 360 ° intake manifold sleeve diameter 33mm. Polini Code: 215.0444
Reference: 252.0006
Brand: POLINI
Vespa 50 125 exhaust gasket. Polini code: 252.0006
Domino D-lock grips with ring nuts. Domino presents the D-Lock, the new Domino brand knobs with the «Lock On» fixing system. They allow practical and quick assembly, without the use of glue, wire or compressed air - on both sides, thanks to the D-Lock ring.
Tested on the track and highly appreciated by Yamaha, KTM, Betamotor and Kawasaki riders, they are the result of Domino's unique experience and expertise.
The single-color D100s are now available in 5 different colors: black, gray, orange, red and blue.
Available:
D10046C4200A9-0 RED D-LOCK GRIPS LOCK ON / WITH RING NUTS
D10046C4000A9-0 BLACK D-LOCK GRIPS LOCK ON / WITH RING NUTS
D10046C4500A9-0 D-LOCK ORANGE GRIPS LOCK ON / WITH RING NUTS
D10046C4800A9-0 D-LOCK BLUE LOCK ON / WITH RING KNOBS
D10046C5200A9-0 GRAY D-LOCK GRIPS LOCK ON / WITH RING NUTS
Pair of D-Lock knobs with «Lock-On» fixing system.
Equipped with 4 interchangeable rings for installation on specific KTM, Husqvarna, GASGAS, Honda, Kawasaki, Suzuki, Yamaha models.
"HIGH GRIP" technology
knurling that maximizes grip in every direction and facilitates cleaning of the knob
Optimal adherence between the grips and the glove
Support Pad Design and Three Clamp Waffle
Material: Thermoplastic rubber
Black colour
Handlebar diameter: 22 mm
Length: left 125 mm / right 130 mm
Knobs length: 116 mm
End: Closed
Flange diameter: 61.5mm
Handle diameter: 30 mm