Xmotorstore Payments
Malossi transmission kit for Yamaha Minarelli 50cc 2t engines. Malossi code: 6112811
"OVER RANGE" New Malossi transmission system.
This new system is based on the new fixed pulley of the Fixed Pulley torque corrector which has a larger diameter and absolutely advanced technological features. The larger diameter of this pulley allows for a significantly higher excursion of the transmission ratio compared to the original pulley which has a significantly lower external diameter.
The Malossi technicians have also taken care of the realization of this pulley down to the smallest details using special materials and a particular type of thermochemical treatment which gives it a very high resistance to wear and a high mechanical resistance. This new fixed pulley has been designed to have perfect functioning when coupled to the Malossi torque corrector (Torque Driver), having the same diameter as the fixed pulley.
In order to fully exploit the range of the new torque corrector unit and the powers available today on racing vehicles, a new Malossi notched belt in Kevlar® (K) has been introduced with an increased section and updated length to ensure in all conditions of operation maximum efficiency.
To complete the renewal of the transmission system and to exploit its exceptional technical characteristics, the Multivar variator has also been updated, equipping it with new tracks for the rollers and a new hub. This new variator is the evolution of the previous generations, born from the many years of experience acquired on the racing circuits and from the Cad-Cam technology available today, allowing to obtain technical results at the highest levels.
The Delta Clutch patented adjustable clutch and the reinforced Malossi Wing Clutch Bell are provided to complete the OVER RANGE system (these products are not included in the kit).
Malossi transmission kit for Yamaha Minarelli 50cc 2t engines. Malossi code: 6112811
"OVER RANGE" New Malossi transmission system.
This new system is based on the new fixed pulley of the Fixed Pulley torque corrector which has a larger diameter and absolutely advanced technological features. The larger diameter of this pulley allows for a significantly higher excursion of the transmission ratio compared to the original pulley which has a significantly lower external diameter.
The Malossi technicians have also taken care of the realization of this pulley down to the smallest details using special materials and a particular type of thermochemical treatment which gives it a very high resistance to wear and a high mechanical resistance. This new fixed pulley has been designed to have perfect functioning when coupled to the Malossi torque corrector (Torque Driver), having the same diameter as the fixed pulley.
In order to fully exploit the range of the new torque corrector unit and the powers available today on racing vehicles, a new Malossi notched belt in Kevlar® (K) has been introduced with an increased section and updated length to ensure in all conditions of operation maximum efficiency.
To complete the renewal of the transmission system and to exploit its exceptional technical characteristics, the Multivar variator has also been updated, equipping it with new tracks for the rollers and a new hub. This new variator is the evolution of the previous generations, born from the many years of experience acquired on the racing circuits and from the Cad-Cam technology available today, allowing to obtain technical results at the highest levels.
The Delta Clutch patented adjustable clutch and the reinforced Malossi Wing Clutch Bell are provided to complete the OVER RANGE system (these products are not included in the kit).
Reference: 5112800
Brand: Malossi
Malossi Multivar Variator for Over Range 5112800 Code: 5112800 Malossi Multivar Variator for Yamaha Minarelli for complete Over Range transmission group
Reference: 6115822
Brand: Malossi
Malossi X K belt for complete transmission group OVER RANGE 18x10.2x782 mm angle 28 Malossi code: 6115822 Malossi belt for APRILIA AMICO 50 2T ONLY for OVER RANGE Malossi belt for APRILIA AREA 51 50 2T LC ONLY for OVER RANGE Malossi belt for APRILIA GULLIVER 50 2T LC ONLY for OVER RANGE Malossi belt for APRILIA RALLY 50 2T (MINARELLI) ONLY for OVER RANGE...
Reference: 61 9733
Brand: Malossi
Malossi rear pulley assembly d.128 Malossi code: 61 9733 Malossi rear pulley assembly for APRILIA AMICO 50 2T only for OVER RANGE. Malossi rear pulley assembly for APRILIA AREA 51 50 2T LC only for OVER RANGE. Malossi rear pulley assembly for APRILIA GULLIVER 50 2T LC only for OVER RANGE. Malossi rear pulley assembly for APRILIA RALLY 50 2T MINARELLI only...
Reference: 285.0134
Brand: POLINI
ADLY: ATV 50AEON: COBRA 50APRILIA: AREA 51 - GULLIVER 50 - GULLIVER 50 LC - RALLY 50 - RALLY 50 LC - SONIC 50 (CY) - SONIC 50 GP (CY) - SR 50 2T mod.94, 95, 96 H2O - SR 50 2T LC STEALTH, RACING, NETSCAPER - SR 50 2T mod.94, 95, 96 Air - SR 50 2T WWWATALA: CAROSELLO 50BENELLI: 491 50 GT, ST - 491 50 RR, RACING, SP, SPORT - K2 50 - K2 50 LIQUID COOLED -...
Reference: 215.0398
Brand: POLINI
Intake manifold Honda Wallaroo 50cc 17.5 mm. Polini Code: 215.0398
Reference: 204.0372/B
Brand: POLINI
Polini piston diameter 47 mm, selection B Polini piston for: Aprilia, Aprilia ET 50, Aprilia Europa 50, Aprilia Futura 50, Aprilia Red rose 50, Aprilia Replica 50, Aprilia RX 50, Aprilia Tuareg 50, Aprilia AF1 50, Atala, Atala Master 50, Atala Hydro, Malaguti, Malaguti Mdx 50, Minarelli, Motron, Motorn Compact, Polini
Reference: 6215013BS
Brand: Malossi
Malossi MHR Synt approved brake pads Malossi code: 6215013BS Malossi brake pads for APRILIA SPORTCITY ONE 125 4T (LEADER M38AM) Front APPROVED Malossi brake pads for APRILIA SPORTCITY ONE 50 4T (PIAGGIO C377M) Front APPROVED Malossi brake pads for APRILIA SR MAX 125 ie 4T LC euro 3 2011->2014 (M357M) Front Rear NOT APPROVED The lack of approval does...
Reference: 01.CA.0020.L
Brand: Ohvale
Ohvale Cover tank fixing washer Code: 01.CA.0020.L
Reference: 01.FA.0150.L
Brand: Ohvale
Ohvale RH CNC fork foot 110/160 EVO Code: 01.FA.0150.L
Reference: IMH-20450
Brand: CS Racing
Mini bike engine exhaust flange, the flange for air motors is essential to limit the power of the mini bike based on the race category. Flange Measurements: 10mm 12mm 15mm Thickness: 3mm Compatible with: Cs, Iame, Bzm, Polini, Or, Zocchi, Orioli, Tcm.
Reference: 5216523
Brand: Malossi
Clutch disc set 6 springs Malossi 5216523 Malossi code: 5216523
Reference: 01.PE.0017.L
Brand: Ohvale
TCEI screw M6X20 UNI 5931 01.PE.0017.L
Reference: 204.0080
Brand: POLINI
Vespa piston 63 mm. Polini code: 204.0080 Compatible with: VESPA: VESPA 150 2T PX, SPRINT VELOCE - VESPA 125 2T PX - VESPA 125 2T TS - VESPA 125/150 2T WHAT POLINI: PISTON SPARE PARTS LML: STAR DELUXE 125 2T - STAR DELUXE 150 2T
Reference: 96482501AA
Brand: Ducati
Ducati Performance complete racing exhaust by Akrapovic for the Ducati Multistrada V4, V4 S and Pikes Peak model 2025. Made of titanium with black end cap and dedicated mapping. Original Ducati product.
Reference: 6718653
Brand: Malossi
Malossi starter crown with mounting screws 6718653 Malossi code: 6718653
Reference: 6119155
Brand: Malossi
Malossi VENTILVAR 2000 half-pulley with d.129 Malossi code: 6119155 Malossi half-pulley for Honda ADV 150 ie 4T LC 2020-2022. Malossi half-pulley for Honda Forza 125 ie 4T LC euro 3 2013-2016. Malossi half-pulley for Honda Forza 125 ie 4T LC euro 4 2017-2020. Malossi half-pulley for Honda PCX 125 ie 4T LC euro 5 2021-. Malossi half-pulley for Honda SH i...
Reference: 206.0322
Brand: POLINI
Polini trapezoidal segment diameter 65x1.4 mm 206.0322 Polini trapezoidal segment for: Gilera, Gilera Runner 125, Gilera Runner 180, Polini
Reference: 249.020
Brand: POLINI
Suzuki Burgman clutch, Malaguti Madison 400 diameter 150 mm Code: 249.020 Diameter: 150 mm Weight: 1820 gr. Application: Benelli, Benelli Velvet 400 Dusk, Malaguti, Malaguti Madison 400 K, Suzuki, Suzuki Burgman / Skywawe 400 X, K3, K6
Reference: 6714418
Brand: Malossi
Power transmission sport gear set z 26 / 40 for original Malossi chain for Yamaha 6714418 Malossi code: 6714418 This Sport version must be mounted exclusively with the original chain because the Malossi racing chain is narrower and does not accept original or similar crowns.
Malossi transmission kit for Yamaha Minarelli 50cc 2t engines. Malossi code: 6112811
"OVER RANGE" New Malossi transmission system.
This new system is based on the new fixed pulley of the Fixed Pulley torque corrector which has a larger diameter and absolutely advanced technological features. The larger diameter of this pulley allows for a significantly higher excursion of the transmission ratio compared to the original pulley which has a significantly lower external diameter.
The Malossi technicians have also taken care of the realization of this pulley down to the smallest details using special materials and a particular type of thermochemical treatment which gives it a very high resistance to wear and a high mechanical resistance. This new fixed pulley has been designed to have perfect functioning when coupled to the Malossi torque corrector (Torque Driver), having the same diameter as the fixed pulley.
In order to fully exploit the range of the new torque corrector unit and the powers available today on racing vehicles, a new Malossi notched belt in Kevlar® (K) has been introduced with an increased section and updated length to ensure in all conditions of operation maximum efficiency.
To complete the renewal of the transmission system and to exploit its exceptional technical characteristics, the Multivar variator has also been updated, equipping it with new tracks for the rollers and a new hub. This new variator is the evolution of the previous generations, born from the many years of experience acquired on the racing circuits and from the Cad-Cam technology available today, allowing to obtain technical results at the highest levels.
The Delta Clutch patented adjustable clutch and the reinforced Malossi Wing Clutch Bell are provided to complete the OVER RANGE system (these products are not included in the kit).
