Xmotorstore Payments
Front fender sr r factory Stamas.
Material: Resin
Weight: 126g
Front fender sr r factory Stamas.
Material: Resin
Weight: 126g
Reference: 6008
Brand: STAMAS
Stamas sr r factory rear fender. Material: Resin Weight: 132g
Reference: 6008/12
Brand: STAMAS
Stamas rear fender sr r factory. Code: 6008/12
Reference: 6007/28
Brand: STAMAS
Stamas front fender for 28 mm diameter forks
Reference: 001002SP1300
Brand: DM
Dm mini bike rear fender for aluminum swingarm 2023. Dm Code: 115
Reference: 022003
Brand: BZM
Bzm reed valve pack for minimoto. Bzm reed valve pack for racing minimoto, compatible with engine crankcases: Bzm 620, Bzm 690, Polini 6.2HP.
Reference: FM10191-40
Brand: Formula
Formula minibike front braided brake hose M8 - M6. Formula code: FM10191-40 Formula hydraulic front brake hose for minibikes, specific for versions from 2023 onwards, with M8 pump side connection and M6 caliper connection.
Reference: F00 006
Brand: DM
Pair of rear wheel bearings with 114 mm spacer (HYDRAULIC BRAKES)
Reference: 143.695.009
Brand: POLINI
Locking key for Polini 2-mass clutch group 143.695.009. Polini clutch locking key for minimoto. The Polini clutch locking key is compatible with all engines that have hole spacing: 74 mm.
Reference: zoc100.0504
Brand: Zocchi
Minimoto clutch shim kit. Kit of washers for calibrating the minibike clutch weights. These "shims" are used to create the correct clearance between the bell and the minibike clutch. As a general rule, the total difference in diameter between the bell and the clutch must be 1 cm. (always check based on brand and model).
Reference: insert.dm.man
Brand: DM
Inserts for DM minimoto half handlebars, available for 25 or 28 fork diameter.
Reference: GHR 049.001
Brand: GHR
Ghr starter cover in ergal. Compatible with Bzm, Iame, Cs, Ghr engines.
Reference: Deviaflussi-Cs
Brand: CS Racing
Iame CS flow diverter, available with the variants: oval / round diameter 15 or 21.
Reference: IMB-20200
Brand: CS Racing
Crankcase shims for minimoto engines – 25x35 mm, thickness 0.10 mm. Sold in pairs. Compatible with Cs, Iame, Polini, Bzm, Ghr, Tcm and more.
Reference: 1011
Brand: STAMAS
Front fairing support tube sr Stamas
Reference: 2013 A/28
Brand: STAMAS
Pair fork factory midi d.28 Stamas
Reference: IMH-20450
Brand: CS Racing
Mini bike engine exhaust flange, the flange for air motors is essential to limit the power of the mini bike based on the race category. Flange Measurements: 10mm 12mm 15mm Thickness: 3mm Compatible with: Cs, Iame, Bzm, Polini, Or, Zocchi, Orioli, Tcm.
Reference: 112.104.00
Brand: GRC
Bearing kit plus spacer for hub Grc Select the desired measure between: 90/94/110/114. L.90 front (for mechanical brake) L.94 front (for hydraulic-mechanical brake) L.111 rear (for mechanical brake) L.114 rear (for hydraulic brake)
Reference: 143.265.001
Brand: POLINI
Polini minibike starter rope roller return spring. Polini Code: 143.265.001
Front fender sr r factory Stamas.
Material: Resin
Weight: 126g
