Xmotorstore Payments
Reference: KOYO 60002
KOYO racing minimoto wheel bearings 10x26x8, compatible with all minimoto bikes. The high-speed wheel bearings for minimoto allow you to improve the sliding of the minimoto when cornering.
Reference: 001002SP129A
Brand: DM
Red silicone shaped H20 tubes kit for all minimoto models. The only pre-formed minimoto water pipes compatible with all engines.
Reference: 143.034.003
Brand: POLINI
Reverso Polini h2o engine gaskets series Reverso Polini h2o engine gaskets series for minimoto Code: 143.034.003
Reference: FM10022-10
Brand: Formula
Formula axial caliper for minibikes and minicross. Pads included. 5 mm tube ring connection. Distance between fixing holes: 55 mm. Caliper thickness: 42 mm.
Reference: 143.250.001
Brand: POLINI
Polini mini bike head support silentblock. Polini Code: 143.250.001
Reference: FD40071-10
Brand: Formula
Formula tube fixing o-ring kit Code: FD40071-10
Reference: 112.159.11
Brand: GRC
Rear brake caliper mechanical support for short hub l.111 Grc
Reference: 001002R02500
Brand: DM
Pair of front wheel bearings with spacer for DM minimoto. DM Code: 001002R02500
Reference: 143.070.001
Brand: POLINI
Polini 4.2 hp minimoto crankcases. Polini code: 143.070.001
Reference: 143.465.004
Brand: POLINI
Polini 911 air filter box. Polini air filter box for minibike model 911, improves engine efficiency with an innovative design and optimized performance. Polini code: 143.465.004 Carburetor inlet: 58 mm.
Reference: 143.190.003
Brand: POLINI
Steering bearings with spacer for Polini 911 minimoto. Polini code: 143.190.003 Set of bearings plus spacer for Polini minimoto steering tube, model 911. Photo purely illustrative: The spacer can vary in shape and size based on the minimoto model.
Reference: TCM32
Brand: Tecnominimoto
Carter bell Tcm For Carter Orioli. Tcm clutch bell housing for Or "Orioli" engines, the card is compatible with 40 and 50 cc 2t minibike engines. It includes the minibike bell bearing, already inserted in the cover.
Reference: 143.034.001
Brand: POLINI
Gasket kit for Polini 4.2 hp mini bike engine. Polini code: 143.034.001. Specific gaskets for Polini mini bikes with 4.2 hp engine.
Reference: GHR 021.002
Brand: GHR
Pair of Ghr engine crankcase spring pins. Pair of "pins" for mounting the Ghr engine crankcase, the pins are used to reduce the diameter of the lower hole of the crankcase, making it the correct size for the 8mm pin.
Reference: 143.000.250
Brand: POLINI
Minimoto Polini 910 RS fairing with 4.2 hp air-cooled engine, 6.5-inch rims. Polini engine: 2 T single cylinder - Aluminum cylinder Bore x stroke: 36 x 39 Displacement: 36.69 Compression ratio: 16.2: 1 Carburetor: SHA 14-14 Ignition: Inductive discharge electronic Fuel: Unleaded petrol with 2% synthetic oil Intake: With reed valve in the crankcase...
Reference: 112.204.11
Brand: GRC
Aluminum half-handlebar with collar d.25 Grc Code: 112.204.11 Aluminum half-handlebar with clamp diameter 25 mm Grc, for Grc.
Stamas fork front axle factory
