Xmotorstore Payments
Front hub Dm in lightened ergal made in CNC, compatible with all Dm rims.
Dm code: 001002SP0080
Front hub Dm in lightened ergal made in CNC, compatible with all Dm rims.
Dm code: 001002SP0080
Reference: 001002R01600
Brand: DM
Bushings kit for DM minimoto floating front disc. The floating bushings allow a better performance of the disc of your minimoto. DM Code: 001002R01600
Reference: 001002R02500
Brand: DM
Pair of front wheel bearings with spacer for DM minimoto. DM Code: 001002R02500
Reference: 001002R026A0
Brand: DM
Pair of rear wheel bearings and spacer 120 DM. DM Code: 001002R026A0
Reference: 129
Brand: DM
New DM minimoto front brake disc. The new Grimeca disc for Dm guarantees better performance and reliability than previous versions, the new design was created to improve the braking performance of your DM mini-bike in every aspect. Ideal for use with oversized sintered pads. Weight: 215g Thickness: 2.5cm
Reference: KOYO 60002
KOYO racing minimoto wheel bearings 10x26x8, compatible with all minimoto bikes. The high-speed wheel bearings for minimoto allow you to improve the sliding of the minimoto when cornering.
Reference: 4011
Brand: STAMAS
Stamas mechanical factory front brake caliper.
Reference: 143.555.003
Brand: Ohvale
Flywheel rotor and stator plate Reverse Polini 143.555.003 Flywheel rotor complete with stator plate for Polini reverse engine, the kit is complete and original Polini. Original Polini reverse engine spare parts.
Reference: 143.002.002-USED
Brand: POLINI
Polini 6.2 Junior Air-Cooled Minimoto Engine – Code 143.002.002 (NEW, sold as USED). Polini 6.2 HP air-cooled engine, ideal for Junior categories and for use on minimotos. New, never used, but sold as used at a promotional price. Complete with Dell'Orto 14.14 L carburetor and throttle cable.
Reference: SKU2913
Brand: Tecnominimoto
Tcm 40g cnc mini bike connecting rod kit. Connecting rod for universal pocket bike, compatible for: Biella CS. Biella Ghr. Biella Polini. Biella Or. Connecting rod Tcm. Biella Quattrini.
Reference: 143.705.008
Brand: POLINI
Pair of Polini minimoto clutch shoes. The Polini shoes are compatible with the original Polini clutch, but also on Italian clutches such as bzm, cs, and others. Use Polini clutch shoes in a range from 6500 to 9000 rpm, only after careful running-in. Polini Code: 143.705.008 Ean: 8054705021091 Plate pin connection diameter: 6 mm Tie rod fixing pin...
Reference: 001002R04800
Brand: DM
Minibike brake wire 100 cm. DM Code: 001002R04800
Reference: zoc100.0504
Brand: Zocchi
Minimoto clutch shim kit. Kit of washers for calibrating the minibike clutch weights. These "shims" are used to create the correct clearance between the bell and the minibike clutch. As a general rule, the total difference in diameter between the bell and the clutch must be 1 cm. (always check based on brand and model).
Reference: GM.3MS
Brand: CS Racing
Clutch spring guide 3 masses cs racing iame. Spring guide for universal 3-mass clutch, compatible with 3-mass plate BZM and CS racing.
Reference: 143.801.043
Brand: POLINI
Polini 910 minimoto fairing glass. The universal Polini 910 minimoto fairing. Polini Code: 143.801.043
Reference: 25610100
Brand: Tecnominimoto
Blata crankshaft 39.8 Tcm. Crankshaft factory 39.8 conrod CNC for Blata minimoto engines. Attention: replacement for original Blata, not a replica.
Reference: 043 DM
Brand: DM
New kit fork plates DM 28 diameter with OFF SET variation from 0 mm to + 2 mm or - 2mm. Tested and promoted with excellent results by the drivers of the Dm Official Team.
Reference: 143.802.004
Brand: POLINI
Complete petrol tank Polini 910 black minibike. Code: 143.802.004. Polini 910 tank complete with petrol tap and cap compatible with all Polini 910 mini bikes.
Reference: 5013
Brand: STAMAS
Stamas rear hub pulley for water pump drive belt.
Reference: 143.225.001
Brand: POLINI
Water connection 14x1.5 Polini. Polini Code: 143.225.001
Reference: GHR 012.001
Brand: GHR
Ghr fitting for water pipe, compatible with head, cards, cylinder.
Reference: 001002R075C0
Brand: DM
Storage shelf for workshop stand objects holder workshop stand dm. DM Code: 001002R075C0
Front hub Dm in lightened ergal made in CNC, compatible with all Dm rims.
Dm code: 001002SP0080
