Xmotorstore Payments
Decomposable cnc collar 28 mm diameter Stamas
Decomposable cnc collar 28 mm diameter Stamas
Reference: 2013 A/28
Brand: STAMAS
Pair fork factory midi d.28 Stamas
Reference: 2019/28
Brand: STAMAS
Semi Handlebar racing d.28 with bracket decomposable cnc more screws Stamas
Reference: 2020/28x2
Brand: STAMAS
Pair of 22 mm Stamas handlebars for 28 mm forks.
Reference: 112.486.32
Brand: GRC
GRC chain tool replacement tip, total pin length 26 mm, thread length 20 mm, tip length 6 mm, thread diameter 8 mm. Grc Code: 112.486.32
Reference: 001002SP095C
Brand: DM
Rear brake caliper support threaded pin for aluminum swingarm Dm. Threaded pin for swingarm Dm. Dm code: 001002SP095C
Reference: M099341-V00
Brand: PMT TYRES
Tubeless valve for wheels 6.5" compatible with minimoto wheels Dm, Stamas, Grc.
Reference: 1015
Brand: STAMAS
Pair support platforms Stamas aluminium midi
Reference: 2013 A/28
Brand: STAMAS
Pair fork factory midi d.28 Stamas
Reference: tcm-014002
Brand: Tecnominimoto
Bzm Tcm exhaust manifold. Exhaust manifold for minibikes, compatible with Bzm, Grc, Tcm mufflers. Standard version, with standard curve.
Reference: ZOC.200.0301
Brand: Zocchi
Zocchi crown holder pulley. Universal support for minimoto crown, the support includes the housing for the minimoto water pump o-ring.
Reference: 143.405.004
Brand: POLINI
Reed valve for Polini reverse engine. Polini code: 143.405.004
Reference: 143.000.250
Brand: POLINI
Minimoto Polini 910 RS fairing with 4.2 hp air-cooled engine, 6.5-inch rims. Polini engine: 2 T single cylinder - Aluminum cylinder Bore x stroke: 36 x 39 Displacement: 36.69 Compression ratio: 16.2: 1 Carburetor: SHA 14-14 Ignition: Inductive discharge electronic Fuel: Unleaded petrol with 2% synthetic oil Intake: With reed valve in the crankcase...
Reference: 143.565.001
Brand: POLINI
Polini 910 minimoto swingarm chain guide shoe. Polini code: 143.565.001
Reference: tcm201835
Brand: Tecnominimoto
DM red front hub, universal for new and old model rims.
Reference: 112.486.40
Brand: GRC
Muffler springs dismount tool, the spring puller is used to disassemble and assemble the springs from the muffler. Rubberized handle for better grip, curved tip compatible with all springs.
Reference: FRZ.HM2
Brand: CS Racing
Clutch Cs minimoto HAMMER GP. Clutch for minimoto compatible with Cs, Iame, Ghr, Bzm engines. This clutch must be used with an 81mm bell. Cs clutch models: - HAMMER GT Low friction coefficient, allows greater slip without affecting performance - HAMMER GP Medium-high friction coefficient - HAMMER EPIC High Coefficient
Reference: IMH-20450
Brand: CS Racing
Mini bike engine exhaust flange, the flange for air motors is essential to limit the power of the mini bike based on the race category. Flange Measurements: 10mm 12mm 15mm Thickness: 3mm Compatible with: Cs, Iame, Bzm, Polini, Or, Zocchi, Orioli, Tcm.
Reference: 143.800.050
Brand: POLINI
Polini 911 rear fender. Specific mudguard for Polini 911 minibike. Polini code: 143.800.050
Decomposable cnc collar 28 mm diameter Stamas
