Xmotorstore Payments
Central frame Stamas SR race factory 2020, the 100% made in Italy competition frame.
Suitable for Stamas Midi and Mini minibikes.
Total weight: 2,908 kg
Central frame Stamas SR race factory 2020, the 100% made in Italy competition frame.
Suitable for Stamas Midi and Mini mini bikes.
Total weight: 2.908 kg
Reference: 1027
Brand: STAMAS
New Stamas 2023 swingarm Compatible with STAMAS from 2012 to 2023
Reference: 2010/28
Brand: STAMAS
Pair plates for fork stems d.28 factory Stamas
Reference: 2013 A/28
Brand: STAMAS
Pair fork factory midi d.28 Stamas
Reference: tubo-sil-1mt
Brand: XRACING
Racing silicone water hose for motorcycle cooling systems. Ø10x19 mm. Available in yellow or orange. Sold per meter.
Reference: IMC-50200
Brand: CS Racing
Small end cage 14x18x10
Reference: 107
Brand: DM
Chain guide shoe for aluminum swingarm Dm, to be completed with article 049 for correct assembly.
Reference: 001002R06100
Brand: DM
DM transparent minibike fairing, compatible with original DM fairings. DM code: 001002R06100 Attention: The color may vary according to the production lot and the constructive choice of the manufacturer.
Reference: 001002R061A0
Brand: DM
Small screen for DM black color, compatible with original Dm fairings. DM Code: 001002R061A0
Reference: 143.000.260
Brand: POLINI
Minimoto Polini 910 fairing S engine 6.2 hp Polini single-cylinder 2-stroke engine - aluminum cylinder Bore x stroke: 36 x 39 Displacement 36.69 cc Compression ratio: 16.2: 1 Carburetor: SHA 14-14 Ignition: Inductive discharge electronic Fuel: Unleaded petrol with 2% synthetic oil Intake: With reed valve in the crankcase Starting: Tear-off with...
Reference: 001002R04800
Brand: DM
Minibike brake wire 100 cm. DM Code: 001002R04800
Reference: IMA-01050
Brand: CS Racing
Cylinder for 40cc air-cooled minibike with Iame Cs brand cast iron barrel, it is possible to use the following flanges for this cylinder: flange 10, flange 12, flange 15, free exhaust. DELIVERY TIME: 90 DAYS
Reference: 109
Brand: DM
Dm minimoto seat post reinforced 7020 aluminum. Weight: 567g
Reference: F00 005
Brand: DM
Rear hub dm for hydraulic brake Formula Lightened rear hub 114 mm DM weight 190g THE HUB DOES NOT INCLUDE THE BEARINGS
Reference: NSK 6202 C4
Brand: XRACING
Pair of bearings minimoto engine Racing NSK C4. The high-slip mini-bike bearings, suitable for competition engines. NSK c4 motor bearings guarantee reliability and very high performance. Recommended application: Cs racing bearings, Iame bearings, Ghr bearings, Polini bearings, Bzm bearings, Tcm bearings, Beast bearings.
Reference: bzm-79mm-m8
Brand: BZM
Clutch bell Bzm 79 mm M8. Bell for minimoto, self-ventilated, in cast iron, with internal diameter 79 mm and pinion pitch M8.
Reference: 001002R04700
Brand: DM
Soft throttle wire for minimoto, this throttle cable allows you to reduce the force required to rotate the throttle, allowing you to accelerate more smoothly and quickly. The gas cable is 90 cm long, with a diameter of 1 mm. DM Code: 001002R04700
Reference: 001002R07300
Brand: DM
Fuel tap for DM minibike, for 4/6 mm hose, m10x1 thread. The minibike fuel tap is applied directly to the frame in the appropriate support (DM minibike). Thanks to its small size, the minibike fuel tap can be easily applied anywhere on the minibike. DM code: 001002R07300 Attention: does not include the nut.
Reference: 143.270.013
Brand: POLINI
21 mm diameter rubber intake manifold for minimoto. The steel manifold is suitable for all minimoto with Italian engine, such as iame, cs, ghr, Polini, bzm, zocchi and others. Manifold compatible with PHBG 15 18 19 21 carburetor. Collector measures: Holes for fixing: 5.5 mm Distance between holes: 34x43 mm Carburetor inlet hole: 21-23 mm Code: 143.270.013
Central frame Stamas SR race factory 2020, the 100% made in Italy competition frame.
Suitable for Stamas Midi and Mini minibikes.
Total weight: 2,908 kg
