Xmotorstore Payments
Spacer aluminium fixing swingarm midi Stamas
Stamas midi swingarm fixing aluminum spacer
Reference: 5007P
Brand: STAMAS
Stamas factory rear hub for pulley including spacer and bearings.
Reference: 1027
Brand: STAMAS
New Stamas 2023 swingarm Compatible with STAMAS from 2012 to 2023
Reference: 001002R03100
Brand: DM
Universal quick throttle control for minimoto, produced by Dm, compatible with: Stamas, Dm, Blata, Grc, Polini and others. Compatible with 21/22 mm handlebars. Knob length 115 mm. Total length of throttle control 145 mm. Code: 001002R03100.
Reference: GHR 021.002
Brand: GHR
Pair of Ghr engine crankcase spring pins. Pair of "pins" for mounting the Ghr engine crankcase, the pins are used to reduce the diameter of the lower hole of the crankcase, making it the correct size for the 8mm pin.
Reference: 143.801.049
Brand: POLINI
Polini 910 minibike fairing black 143.801.049. Polini 910 s right and left minibike fairing, in glossy black colour, compatible with all Polini 910, S, Rs. Polini code: 143.801.049 Left and right pair.
Reference: TCM139
Brand: Tecnominimoto
Minibike crankshaft Tcm 39.9 gold. Factory crankshaft 39.9 conrod CNC for competition pocket bikes.
Reference: MAS.HM2
Brand: CS Racing
Pair of weights for two-mass clutches GP HAMMER 2.0 New HAMMER 2.0 clutches born from the experience of our technicians directly from the most important competition fields, it has immediately become an irreplaceable tool !!! Precisely this experience of ours in the world of race minibikes and beyond ... always leads us towards a continuous evolution and...
Reference: TCM162
Brand: Tecnominimoto
TCM minimoto muffler for 40 cc engines. Tecnomoto minimoto muffler with non-decomposable manifold. Complete exhaust for minimoto with 40cc 2t air and water cooled engine. Muffler compatible with: TCM / BZM / OR / POLINI / MALOSSI / ZOCCHI.
Reference: 001001002000
Brand: DM
New DM minimoto frame kit midi 2025 full chrome 4 version. Compatible with Dm Junior and Senior minimoto bikes. Reduced weight of 700 grams from the previous version. Tubular top 20mm bottom 18mm. DM Code: 001001002000
Reference: Xracing-chiave-frizione
Brand: XRACING
Minibike clutch adjustment wrench. Key to adjust the minibike clutch nuts, compatible with clutches: Polini, Ghr, Bzm, Cs, Iame, and others.
Reference: 1027
Brand: STAMAS
New Stamas 2023 swingarm Compatible with STAMAS from 2012 to 2023
Reference: 010.0743
Brand: POLINI
Minimoto starter handle, universal for minibikes with pull starter with rope. Polini Code: 010.0743
Reference: FM40026-20
Brand: Formula
Formula 11mm diameter front pump piston kit. Formula Code: FM40026-20
Reference: 2021/28 X 2
Brand: STAMAS
Stamas clip-on handlebar clamps cnc separable for 28 mm diameter forks with screws, 2 pieces.
Reference: 129
Brand: DM
New DM minimoto front brake disc. The new Grimeca disc for Dm guarantees better performance and reliability than previous versions, the new design was created to improve the braking performance of your DM mini-bike in every aspect. Ideal for use with oversized sintered pads. Weight: 215g Thickness: 2.5cm
Reference: TCM10
Brand: Tecnominimoto
TCM minibike crankshaft overhaul kit. Kit consisting of connecting rod cage, connecting rod shaft, and washers. This kit is compatible for overhauling the crankshaft, tcm, bzm, iame, ghr, polini, or, zocchi, beast.
Reference: 6007
Brand: STAMAS
Front fender sr r factory Stamas. Material: Resin Weight: 126g
Reference: 143.765.012
Brand: POLINI
Complete rear right hydraulic brake for Polini GP5 and GP6 minimoto. Original Polini component – code 143.765.012.
Spacer aluminium fixing swingarm midi Stamas
