- New
Xmotorstore Payments
Minimoto water pump reduced pulley.
The reduced pulley "in the external diameter" is used to increase the number of rotations of the minimoto water pump impeller, forcing a greater recirculation of the water.
External diameter: 33 mm.
Internal diameter: 8 mm.
Minimoto water pump reduced pulley.
The reduced pulley "in the external diameter" is used to increase the number of rotations of the minimoto water pump impeller, forcing a greater recirculation of the water.
External diameter: 33 mm.
Internal diameter: 8 mm.
Reference: 001002SP0110
Brand: DM
New DM pulley at the hub for water pump transmission diameter 100 lightened, or free. DM pulley sizes: internal diameter 45 mm, external diameter 100 mm, thickness 8.5 mm on the hub, external thickness 7 mm, OR channel 3 mm.
Reference: 143.355.005
Brand: GRC
Or pump transmission to the pinion. Code: 143.355.005
Reference: Or.tra.L
Brand: GRC
Or pump drive to wheel, or connect the water pump pulley to the rear wheel hub pulley.
Reference: 001002SP129A
Brand: DM
Red silicone shaped H20 tubes kit for all minimoto models. The only pre-formed minimoto water pipes compatible with all engines.
Reference: pmp.h2o.tcm
Brand: Tecnominimoto
Minibike water pump d.35 increased, increases the flow of water in the cooling system, ensuring better engine performance. We recommend the use of silicone tubing to achieve maximum water cooling performance. Universal water pump for minimoto. Attention: the color may vary based on the manufacturer's construction choices.
Reference: 04.PE.0009.L
Brand: Ohvale
Original gear linkage lever for Ohvale GP-7. Rearset shift system spare part. Code 04.PE.0009.L.
Reference: 171.0572
Brand: POLINI
Polini For Race Ø75 mm digital ignition for AM6, Derbi, and Piaggio engines – dual ignition maps and 12V light output.
Reference: 241.731
Brand: POLINI
Polini Variator for Hi-speed Yamaha Mbk Evolution diameter 13 electric start 241.731 Code: 241.731 Variator supplied with two series of 19x15.5 rollers of 3.2 and 3.8 gr. Application: Aprilia, Aprilia Area 51, Aprilia Gulliver 50/50 LC, Aprilia Rally 50/50 LC, Aprilia Sonic 50 (CY) / 50 GP (CY), Aprilia Sr 50 2T mod. 1993/50 2T mod. 94, 95 , 96 H2O / 50...
Reference: 254.0138
Brand: POLINI
Polini cylinder base gasket thickness 0.10 mm Piaggio Zip 50cc 2t h2o. Polini Code: 254.0138
Reference: 203.0122
Brand: POLINI
Aprilia Sr 50 Polini air filter 203.0122
Reference: 03.OE.0008.L
Brand: Ohvale
Ohvale LH Front fender support Code: 03.OE.0008.L
Reference: 206.0375
Brand: POLINI
Polini segment diameter 58x1 mm chromed 206.0375 Polini segment for: Vespa, Vespa 125, Vespa 50, Polini
Reference: 463530083
Brand: RMS
Red sheath for gas, brake, clutch cable, 30 meters long. The sheath is coated inside with Teflon, to allow a better sliding of the cables, while the structure is in Teflon / metal for a longer life. External diameter 4mm, internal for cables up to 2mm. Compatible with all vehicles.
Reference: 204.0048
Brand: POLINI
Vespa 50cc piston 55.8 mm. Polini Code: 204.0048
Reference: 209.0476
Brand: POLINI
Vespa 125 cc et3 58mm gaskets 209.0476
Reference: 251.0033
Brand: POLINI
Or series dome cylinder head Polini Big evo 52 mm. Polini Code: 251.0033
Reference: 03.IF.0064.L
Brand: Ohvale
Ohvale Gp-2 rear brake pads. Ohvale code: 03.IF.0064.L Specific pads for Gp-2 with original J. Juan Ohvale caliper.
Reference: 171.0627
Brand: POLINI
BULTACO: ASTRO 50 - LOBITO 50DERBI: GPR 50 - GPR 50 Nude - GPR 50 RACING - SENDA 50 DRD R - SENDA 50 DRD SM - SENDA 50 EXTREME - SENDA 50 EXTREME SMGILERA: SMT 50 - RCR 50 - GSM 50, H@K, ZULU (2001)POLINI: RICAMBI ACCENSIONE
Reference: 3214818
Brand: Malossi
Malossi RX exhaust for Piaggio Carnaby Malossi code: 3214818 Malossi exhaust for Piaggio Carnaby 300 ie 4T LC euro 3 (Quasar) type: M60 var. 4 ver. 00. The "type" only specifies for which model the approval is valid, it does not limit its assembly.
Reference: 01.CA.0053.G
Brand: Ohvale
Ohvale Lateral fairing LH unpainted Code: 01.CA.0053.G
Reference: 01.SD.0304.L
Brand: Ohvale
Ohvale Gear oil pump drive Code: 01.SD.0304.L
Minimoto water pump reduced pulley.
The reduced pulley "in the external diameter" is used to increase the number of rotations of the minimoto water pump impeller, forcing a greater recirculation of the water.
External diameter: 33 mm.
Internal diameter: 8 mm.