- On sale!
- Reduced price
- New
Xmotorstore Payments
Pair of Dm spacers for air head. Spacers for air motor on frame Dm.
Dm minimoto spacers measures:
Long side: 51 mm
Short side: 30.5mm
Hole: 8 mm
Outside diameter: 16 mm
Pair of Dm spacers for air head. Spacers for air motor on frame Dm.
Dm minimoto spacers measures:
Long side: 51 mm
Short side: 30.5mm
Hole: 8 mm
Outside diameter: 16 mm
Reference: 143.015.023
Brand: POLINI
Polini minibike air cylinder head diameter 36mm 40cc. Polini Code: 143.015.023
Reference: 001002A00900
Brand: DM
Pair of Dm minimoto spacers for water engine head
Reference: 001002A02900
Brand: DM
Minimoto upper engine support pin Dm, 2 pieces.
Reference: 143.730.021
Brand: POLINI
Polini front wheel 6.5 "910/911 5 spokes. Rim suitable for modification of Polini minibikes from 5" to 6.5 ". Polini Code: 143.730.021
Reference: 143.802.004
Brand: POLINI
Complete petrol tank Polini 910 black minibike. Code: 143.802.004. Polini 910 tank complete with petrol tap and cap compatible with all Polini 910 mini bikes.
Reference: 044
Brand: DM
Minimoto swingarm Dm 2025 center distance 272 mm. The new Dm 2025 swingarm has been reinforced and improved, allowing a better ride and a longer life even in conditions of maximum stress. The mini bike will be more responsive and stable. Dm code: 044
Reference: 143.000.029
Brand: POLINI
Minimoto Polini 910 Rs hull with 4.2 HP air motor, 5-inch wheels, white colour. Polini code: 143.000.029. Minimoto Polini 910 S hull 4.2 hp engine. Polini single-cylinder 2-stroke engine, aluminum cylinder. Bore x stroke: 36 x 39. Displacement 36.69cc. Compression ratio: 16.2:1. Carburettor: SHA 14-14. Ignition: Electronic inductive discharge. Power...
Reference: Allu-frame-dm
Brand: DM
DM full aluminum minimoto frame kit. DM aluminum frame, original DM. DM minimoto frame, completely in aluminum, very high quality product, compatible with MIDI and MINI versions. Compatible with air and water versions. Offered on the Factory Racing DM racing versions. The total weight is only: 1430 grams. VERY RARE AND UNFINDABLE, LAST PIECE AVAILABLE.
Reference: 112.100.00
Brand: GRC
Screw valve for racing rims, 1/8" gas thread.
Reference: 1028
Brand: STAMAS
Pair of standard arms for swingarm 2012 21
Reference: 7009
Brand: STAMAS
Pair of aluminum spacers for fixing the air motor head on Stamas minimoto
Reference: 112.152.00
Brand: GRC
Lever return spring to left caliper Grc (MECHANICAL) 112.152.00
Reference: 143.801.030
Brand: POLINI
Polini 911 front fairing white, includes right and left side. Polini code: 143.801.030
Reference: Prf post DM carbo
Brand: DM
Carbon rear fender for DM with aluminum swingarm from 2012 onwards. The lightest DM fender, only 35 grams. Compatible with original attachments, no changes are required.
Reference: 112.486.32
Brand: GRC
GRC chain tool replacement tip, total pin length 26 mm, thread length 20 mm, tip length 6 mm, thread diameter 8 mm. Grc Code: 112.486.32
Reference: GHR 011.001
Brand: GHR
Ghr cylinder / crankcase stud kit. The kit consists of 9 pieces.
Reference: TCM020
Brand: Tecnominimoto
Clip-on handlebars and clamps for 25 mm minimoto forks. This kit includes: 2 clip-on handlebars, 22 mm in diameter, for 25 mm forks. 2 clip-on handlebar clamps for 25 mm forks. 4 screws.
Pair of Dm spacers for air head. Spacers for air motor on frame Dm.
Dm minimoto spacers measures:
Long side: 51 mm
Short side: 30.5mm
Hole: 8 mm
Outside diameter: 16 mm