Xmotorstore Payments
Lower motor support pin Dm
Reference: 001002A00900
Brand: DM
Pair of Dm minimoto spacers for water engine head
Reference: 001002R006B0
Brand: DM
Pair of Dm spacers for air head. Spacers for air motor on frame Dm. Dm minimoto spacers measures: Long side: 51 mm Short side: 30.5mm Hole: 8 mm Outside diameter: 16 mm
Reference: 001002A02900
Brand: DM
Minimoto upper engine support pin Dm, 2 pieces.
Reference: 120
Brand: DM
Dm handlebars complete with clamp diameter 28 mm
Reference: Sel.Blu.2022
Brand: CS Racing
Minimoto Selettra coil, blue color, with CIV 2024 marking. This coil is compatible with Cs, Iame, Ghr, Bzm, Zocchi, Tcm, Beast. The coil is marked CIV 2024, to be used in the Italian minimum championship, and FMI races. Selettra 3500 minimoto coil assembly features: The distance between the holes of the blue coil is 52 mm, the holes are 6 mm. ATTENTION:...
Reference: MAS.HM1
Brand: CS Racing
Pair of weights for GT HAMMER 2.0 two-mass clutches New HAMMER 2.0 clutches born from the experience of our technicians directly from the most important competition fields, it has immediately become an irreplaceable tool !!! Precisely this experience of ours in the world of race minibikes and beyond ... always leads us towards a continuous evolution and...
Reference: 045A
Brand: DM
Throttle cable with long sheath for pocket bikes with phbg carburettor, this new version of longer throttle wire and sheath allow you to work on the carburettor, simply by extracting it from the intake manifold and positioning it outside the frame, without having to remove the throttle cable. Sheath length 100cm. Gas wire length 116.5 cm.
Reference: IMB-20200
Brand: CS Racing
Scratch bank engine 25x35 thickness 0.10 Iame (10 pieces)
Reference: 213.0017
Brand: POLINI
Reed valve Polini 4.2 hp minimoto engine. Polini Code: 213.0017
Reference: 1008 R
Brand: STAMAS
Stamas crown side chain guard
Reference: 2036 7 18NC
Brand: PBR
M10 Z7 reinforced minimoto sprocket compatible with bell: Xracing CS Iame BZM GHR
Reference: 143.000.261
Brand: POLINI
Minimoto Polini 910 Rs hull with 6.2 HP air motor, 6.5 inch wheels, white colour. Polini code: 143.000.261. Minimoto Polini 910 S hull 6.2 hp engine. Polini single-cylinder 2-stroke engine, aluminum cylinder. Bore x stroke: 36 x 39. Displacement 36.69cc. Compression ratio: 16.2:1. Carburettor: SHA 14-14. Ignition: Electronic inductive discharge. Power...
Reference: 143.270.013
Brand: POLINI
21 mm diameter rubber intake manifold for minimoto. The steel manifold is suitable for all minimoto with Italian engine, such as iame, cs, ghr, Polini, bzm, zocchi and others. Manifold compatible with PHBG 15 18 19 21 carburetor. Collector measures: Holes for fixing: 5.5 mm Distance between holes: 34x43 mm Carburetor inlet hole: 21-23 mm Code: 143.270.013
Reference: 030
Brand: DM
Dm mini bike front fender supports, compatible with 28 mm and 25 mm forks, for plastic fender and carbon fender.
Reference: 143.030.001
Brand: POLINI
Pin 10x30 mm 40cc K2D Polini 143.030.001
Reference: GHR 510.001
Brand: GHR
Head washers kit Ghr 40cc air. Ghr cylinder squish kit. (5 pz.)
Reference: 001002R07300
Brand: DM
Fuel tap for DM minibike, for 4/6 mm hose, m10x1 thread. The minibike fuel tap is applied directly to the frame in the appropriate support (DM minibike). Thanks to its small size, the minibike fuel tap can be easily applied anywhere on the minibike. DM code: 001002R07300 Attention: does not include the nut.
Reference: 143.415.020
Brand: POLINI
Polini Gp3 right and left footpeg supports. Polini Code: 143.415.020
Lower motor support pin Dm
