Xmotorstore Payments
Dellorto AN pulverizer, the Dellorto AN emulsifier for PHBG carburetor.
Dellorto code 9511x28
Dellorto AN pulverizer, the Dellorto AN emulsifier for PHBG carburetor.
Dellorto code 9511x28
Reference: 1486 x 02
Brand: DELLORTO
Dellorto maximum jet M5 for Phbg Sha and others carburetors. Size available from 30 to 140.
Reference: 1488 x 02
Brand: DELLORTO
Dellorto idle jet for PHBG and other carburetors. Wide range of Dellorto minimoto jets. Select the desired size from 30 to 70. Dellorto Code: 1488x02
Reference: 52526-77
Brand: DELLORTO
The phbg gasket kit includes: phbg tank gasket, phbg tank cap gasket, air screw oring, double screw carburetor closing gasket, and phbg screw cap gasket. Dellorto Code: 52526-77
Reference: 1316875
Brand: Malossi
Malossi anti-vibration rubber assembly Malossi code: 1316875
Reference: 203.0167
Brand: POLINI
Vespa 125cc 150cc 4t air filter. Polini Code: 203.0167
Reference: 213.0522
Brand: POLINI
Polini reed petal for Mbk Booster 0.35 mm. Polini Code: 213.0522
Reference: 203.0143
Brand: POLINI
Yamaha Majesty 250cc air filter. Polini code: 203.0143
Reference: 13 3989
Brand: Malossi
Malossi sleeve with diameter 31 for Vespa PK 50 - 125 Malossi code: 13 3989
Reference: 02 1333
Brand: Malossi
Malossi manifold 22 mm center distance 56 mm for Phbl 21-22. Malossi Code: 02 1333
Reference: 02 1610B
Brand: Malossi
Malossi manifold for Vespa Special 50cc, manifold measures 18X21.5 mm, compatible with Shb 16 carburetor. Malossi code: 02 1610B
Reference: 213.0525
Brand: POLINI
Polini 39x32 0,30mm carbon reeds set. Polini Code: 213.0525
Reference: 215.0462
Brand: POLINI
Polini intake manifolds for Minarelli AM6 and 21 carburettor. Polini code: 215.0462 Polini intake manifolds for Minarelli AM6 engines are designed to simplify the assembly of oversized carburettors. The slightly elongated rubber manifold facilitates the passage of the clutch wire with the possibility of connecting directly to the original filter box. The...
Reference: 203.0132
Brand: POLINI
Mbk Booster 50cc air filter. Polini code: 203.0132
Reference: 5515785
Brand: Malossi
Lambda Emulator TC UNIT O2 Malossi controller 5515785 for Yamaha Xenter Code: 5515785 To further optimize carburetion and transient performance, the use of the O2 controller is recommended. In the latest generation motorbikes, the control unit, thanks to the lambda probe, is able to correct the quantity of fuel that must be injected so that the...
Reference: 14351x28
Brand: DELLORTO
FQ emulsifier pulverizer Dellorto
Reference: 01.AS.0016.L
Brand: Ohvale
Ohvale air filter diameter 42 mm. Ohvale code: 01.AS.0016.L Mesh air filter for Ohvale, with 42 mm diameter carburettor inlet.
Reference: 215.0002
Brand: POLINI
Intake manifold Vespa Primavera ET3 125cc diameter 24 mm Polini for Dellorto carburetor. Polini Code: 215.0002 Compatible with: VESPA 125 2T PRIMAVERA - VESPA 50 2T SPECIAL - VESPA 125 2T PRIMAVERA ET3
Reference: 02631
Brand: DELLORTO
Dellorto Phbg 19 ds carburettor Diffuser: 19mm Motor connection: ELASTIC (MALE) ø25 Filter connection: M32 x 1.25mm Air start: MANUAL AIR (CABLE) Compatible with engines: 2 STROKE Connection for mixer Gas valve: 30 Conical needle: W9 Pulverizer: 262 AN Maximum jet: 75 by 5mm Minimum jet: 45 Starter jet: 60 Float: 4 grams
Reference: 5519335
Brand: Malossi
Malossi Force master 3 electronic control unit for injection vehicles 5519335 Malossi code: 5519335 The scooter's original control unit normally interfaces with the lambda probe installed on the muffler to analyze the fuel content and adjust the carburetion accordingly. Force Master 3 intercepts the signal of the original probe, sending the values...
Dellorto AN pulverizer, the Dellorto AN emulsifier for PHBG carburetor.
Dellorto code 9511x28
