- Reduced price
- New
Xmotorstore Payments
Air filter protective sock. An absolute novelty for the protection of the air filter, the mesh fabric sock allows for greater filtering of the aspirated material, guaranteeing clean air for the engine.
The filter sock is handmade in Italy, with the highest quality materials.
When to use the mesh on the air filter?
- The filter protection can be used in case of rain, allowing better water repellency, leaving the air filter drier.
- The filter protection can be used to reduce the entry of small impurities and dirt into the filter, ideal in conditions of dirty asphalt or sand.
The filter protection sock can be applied to the Xracing minimoto air filter, and to all air filters with a maximum diameter of 90mm. It is easy to apply thanks to its elastic closure.
Air filter protective sock. An absolute novelty for the protection of the air filter, the mesh fabric sock allows for greater filtering of the aspirated material, guaranteeing clean air for the engine.
The filter sock is handmade in Italy, with the highest quality materials.
When to use the mesh on the air filter?
- The filter protection can be used in case of rain, allowing better water repellency, leaving the air filter drier.
- The filter protection can be used to reduce the entry of small impurities and dirt into the filter, ideal in conditions of dirty asphalt or sand.
The filter protection sock can be applied to the Xracing minimoto air filter, and to all air filters with a maximum diameter of 90mm. It is easy to apply thanks to its elastic closure.
Reference: X-Filtro
Brand: XRACING
New X-F special racing air filter 100% MADE IN ITALY use: high performance racing universal for: minibike motorbike scooter pitbike brand: Xmotorstore & Marchald Red sponge length: 140mm diameter: 85mm connection diameter: 60/65 mm suitable for venturi. washable X-F was born from the experience gained in years of competitions and from various tests,...
Reference: FB 001
Brand: OMG
Omg petrol filter made in Italy, with 6 mm hose connection.
Reference: 420015
Brand: XRACING
Motorcycle silicone fuel hose for various applications. This petrol hose for carburetor, tank, and other uses, allows maximum curvature without blocking the flow of fuel. These racing fuel hoses are suitable for all vehicles. Fuel pipe size: 1 METER Fuel tube internal diameter: 5.5mm External diameter of fuel pipe: 6mm Available colors: white petrol tube,...
Reference: 0981400 82
Brand: DELLORTO
Dellorto venturi for phbg carburetor threaded M32x1.25 external diameter 59mm. Fitting compatible with PHBG 15, 18, 19, 21. Dellorto Code: 0981400 82
Reference: A3401
Brand: Alfano
135 cm Alfano A3401 thermocouple extension, to connect all Alfano thermocouple sensors.
Reference: 112.485.00
Brand: GRC
Minibike work stand GRC. High stand, to work on the GRC minibike, the stand is dismountable, to be transported comfortably. The GRC stand is compatible with all GRC minibikes. Stand complete with shelf to rest objects. Black and red color.
Reference: 6715787
Brand: Malossi
Wheel axle shaft 192.5 mm with 27 mm diameter keying Malossi 6715787 Malossi code: 6715787 Wheel axle shaft 192.5 mm with 27 mm diameter keying Malossi for Piaggio.
Reference: 5513400
Brand: Malossi
Malossi Tc Unit Rpm control electronic control unit 5513400 for Malaguti Malossi code: 5513400 Tc Unit Rpm control electronic control unit TC UNIT R.P.M. CONTROL These control units have a microswitch, which can be positioned as desired on your vehicle in a sheltered place, which activates the rev limiter of your engine. The number of revolutions at which...
Reference: 249.016
Brand: POLINI
Clutch Honda Foresight, Piaggio X 9 250 diameter 135 mm Code: 249.016 Diameter: 135 mm Weight: 1319 gr. Application: Honda, Honda Foresight 250 98/250 99, Honda Forza 250 from 2001/300 ie 4T LC, Honda Jazz 250, Reflex 250, Honda SH 300i from 2007 to 2014 / 300i E4 from 2015, Peugeot, Peugeot Sv 250, Piaggio , Piaggio X 9 250
Reference: 31 8465
Brand: Malossi
Malossi MHR REPLICA cylinder diameter 47 in aluminum H2O Malossi code: 31 8465
Reference: 140.0183/R
Brand: POLINI
Polini cylinder kit diameter 47 mm racing 140.0183 / R Polini thermal group kit for: Aprilia, Aprilia Sr 50 2T R, Aprilia Sr 50 2T Factory Lc, Aprilia Sr 50 Factory Lc E4, Derbi, Derbi GP1 50 euro2, Derbi GP1 50 Open, Derbi GP1 50 Race, Derbi GP1 50, Gilera , Gilera Dna 50, Gilera Runner 50, Gilera Runner 50 Sp, Gilera Runner 50 Poggiali, Piaggio, Piaggio...
Reference: 144.830.012
Brand: POLINI
Intermittent xp4s 125 Polini Code: 144.830.012
Reference: 03.CA.0053.G
Brand: Ohvale
Ohvale Lateral fairing LH unpainted Code: 03.CA.0053.G
Reference: 01.SZ.0120.L
Brand: Ohvale
Stud Ohvale M6x32 Code: 01.SZ.0120.L
Reference: 267000120
Brand: RMS
Flywheel puller Vespa 28x1 right. Code: 267000120. Universal flywheel extractor for Piaggio Vespa 50, 125, 150, 180, 200 cc. Type: flywheel extractor. Notes : 28x1, right-hand thread.
Reference: 3720.82.40.06-0
Brand: Domino
Pair of Domino style 120mm grips closed 3720.82.40.06-0 Pair of grips in thermoplastic rubber with multi-pyramidal finish. Material: Thermoplastic rubber Black colour Length: 120 mm End: Closed Handlebar / Gas tube diameter: 22/26 mm Flange diameter: 47 mm Handle diameter Knob mounted: 32 mm
Reference: 11 9684B
Brand: Malossi
Complete gasket kit for cylinder diameter 60 for original head for 125cc 4T scooter Malossi code: 11 9684B Malossi gasket for APRILIA HABANA 125 4T. Spare part for Malossi cylinder 31 9518: production discontinued. Malossi gasket for APRILIA MOJITO 125 4T. Spare part for Malossi cylinder 31 9518: production discontinued. Malossi gasket for ITALJET TORPEDO...
Reference: 01.FO.0005.L
Brand: Ohvale
Ohvale swingarm pivot bushing. Ohvale code: 01.FO.0005.L Compatible with GP-0 and GP-2.
Reference: 144.020.007/A
Brand: POLINI
Complete Polini piston diameter 40.2 mm, selection A (40.155 mm) Complete Polini piston for minicross
Air filter protective sock. An absolute novelty for the protection of the air filter, the mesh fabric sock allows for greater filtering of the aspirated material, guaranteeing clean air for the engine.
The filter sock is handmade in Italy, with the highest quality materials.
When to use the mesh on the air filter?
- The filter protection can be used in case of rain, allowing better water repellency, leaving the air filter drier.
- The filter protection can be used to reduce the entry of small impurities and dirt into the filter, ideal in conditions of dirty asphalt or sand.
The filter protection sock can be applied to the Xracing minimoto air filter, and to all air filters with a maximum diameter of 90mm. It is easy to apply thanks to its elastic closure.