Xmotorstore Payments
Polini Cp carburetor gas valve:
343.0400 carburetor gas valve CP D.24-30 degrees
343.0401 carburetor gas valve CP D.24-40 degrees
343.0402 carburetor gas valve CP D.25-30 degrees
343.0403 CP carburetor gas valve D.25-40 degrees
343.0404 carburetor gas valve CP D.24-50 degrees
Polini Cp carburetor gas valve:
343.0400 carburetor gas valve CP D.24-30 degrees
343.0401 carburetor gas valve CP D.24-40 degrees
343.0402 carburetor gas valve CP D.25-30 degrees
343.0403 CP carburetor gas valve D.25-40 degrees
343.0404 carburetor gas valve CP D.24-50 degrees
Specific References
Reference: 343.0014
Brand: POLINI
Float CP Polini carburettor. Polini Code: 343.0014 Available weights: 343.0014 FLOAT CARB.CP GRAMS 4 343.0027 FLOAT CARB.CP GRAMS 5
Reference: 343.0017
Brand: POLINI
Cp-Pwk carburetor petrol closing pin. Polini Code: 343.0017
Reference: 343.0600
Brand: POLINI
Conical needle Polini Cp 14/22 carburettor. Polini Code: 343.0600
Reference: 343.0601
Brand: POLINI
Conical needle Polini Cp 12/22 carburettor. Polini Code: 343.0601
Reference: 343.0020
Brand: POLINI
Seeger for Polini Cp Pwk carburetor needle. The seeger or clip is used to keep the carburettor needle in position. Polini Code: 343.0020
Reference: 00592
Brand: DELLORTO
Dellorto SI 24.24 E carburetor with mixer 00592. Dell'Orto / Spaco SI 24.24 E carburetor with mixer, Ø 24 mm, 116 main jet. Compatible with Vespa PX200, Rally 200, PX125, PX150, and other Largeframe models.
Reference: 213.0525
Brand: POLINI
Polini 39x32 0,30mm carbon reeds set. Polini Code: 213.0525
Reference: 02 4917B
Brand: Malossi
Malossi intake manifold 16x21.5 mm inclined 02 4917B Code: 02 4917B Malossi inclined intake manifold
Reference: 01.AS.0050.L
Brand: Ohvale
Ohvale Carburetor PZ 27 Code: 01.AS.0050.L
Reference: 1615550
Brand: Malossi
Malossi phbh 30 bd fuel system for Vespa PX E 200cc 1615550 Malossi code: 1615550 Malossi phbh 30 bd lamellar fuel system on the crankcase Application: Malossi fuel system for Vespa PX E 200 2T
Reference: 9450x80
Brand: DELLORTO
4 gr float for Dellorto PHBG carburetors. Dellorto replacement suitable for: Float for Phbg 15 Float for Phbg 18 Float for Phbg 19 Float for Phbg 21 Dellorto Code: 9450x80
Reference: 380.0002
Brand: POLINI
Set of 10 main jets for Mikuni carburetor. 380.0002 from 80 to 125 380.0003 from 130 to 175 380.0004 from 180 to 270 380.0005 from 280 to 370 380.006 from 380 to 470
Reference: 01407-00
Brand: DELLORTO
Dellorto PHVA 17.5 ED carburettor. Dellorto Code: 01407 The Dellorto phva 17.5 carburettor is universal, compatible with most scooters. Phva 17.5 ED Dellorto calibrations: Inlet air inlet diameter 35mm. 24 mm rubber connection diameter. Manual mechanical air starter Oil outlet Standard jet 30 guillotine A7 injector needle 211FA Atomizer 65 main jet 34...
Reference: 13 1012b
Brand: Malossi
Malossi sleeve for PHBE - PHF 30 - 34 carburetors (Height 35 cm) Malossi code: 13 1012b
Reference: 5518931B
Brand: Malossi
Lambda O2 Malossi controller 5518931B emulator Code: 5518931B The use of the new O2 controller allows the management of the carburetion in the area where the Lambda probe controls the title of the fuel-air mixture to be introduced into the combustion chamber. This device is able to make the lambda probe work at a different value from the stoichiometric...
Reference: 1311614
Brand: Malossi
Malossi rubber assembly for oversized shock absorbers Malossi code: 1311614
Reference: 274504
Brand: C4
Complete intake kit with 23 mm carburetor connection for Peugeot, the kit includes the reed valve pack, gaskets, screws for assembly.
Reference: 1613526
Brand: Malossi
Malossi Mhr vhst 28 bs 1613526 fuel system Malossi code: 1613526 Malossi Mhr vhst 28 bs fuel system with reed valve Application: Malossi fuel system for APRILIA MX 50 2T LC (MINARELLI AM 6) Malossi fuel system for APRILIA RS 50 2T LC (MINARELLI AM 3 > 6) Malossi fuel system for APRILIA RS 50 2T LC euro 2 2006-> (DERBI D50B1) Malossi fuel system for...
Reference: 201.1704
Brand: POLINI
Polini carburetor for Vespa 50 diameter 17.5. Polini Code: 201.1704 It is mounted on the original Piaggio manifold and union d.16.16. (21.6x26.5) Maximum jet 76 Minimum Jet 42 Needle 14/22 24x30 valve Pulverizer bush d.2,6
Reference: 144.270.001
Brand: POLINI
Polini minimotard rubber intake manifold. Polini Code: 144.270.001
Polini Cp carburetor gas valve:
343.0400 carburetor gas valve CP D.24-30 degrees
343.0401 carburetor gas valve CP D.24-40 degrees
343.0402 carburetor gas valve CP D.25-30 degrees
343.0403 CP carburetor gas valve D.25-40 degrees
343.0404 carburetor gas valve CP D.24-50 degrees
