Xmotorstore Payments
Or seal for Polini 6.5 "(3.53X145.65) rim.
Polini Code: 143.355.003
Or seal for Polini 6.5 "(3.53X145.65) rim.
Polini Code: 143.355.003
Reference: Bzm-105018020
Brand: BZM
Blata minimoto engine gaskets. Gasket kit for Blata, compatible with Ø36-37-40. Kit compatible with: Blata 40cc 2t engine gaskets Blata 50cc 2t engine gaskets The seals are compatible with replica and original Blata.
Reference: MLL.0040
Brand: CS Racing
Green clutch springs with 2.2mm thread. Green springs are recommended on junior engines.
Reference: 2036 6 18NC
Brand: PBR
M10 Z6 reinforced minimoto sprocket. Universal minibike sprockt M10 Z6. Compatible with bell: Xracing CS Iame BZM GHR
Reference: Kit.rev.6,2
Brand: POLINI
Polini 6.2 hp engine overhaul kit. includes: Banco racing c4 bearings. Kit gaskets complete 6.2 hp. Segment 40 or 50cc. Roller cage.
Reference: H2o-fixing-pipe
Brand: XRACING
Minimoto water pipe fixing fitting in red ergal. Xmotorstore presents its new product: Minimoto water pipe fixing fitting entirely machined from solid and anodized in red, particular attention has been paid to heat dissipation, thanks to the material that allows easy cooling. The fitting is easily inserted into the minimoto water pipe, allowing the pipe...
Reference: 143.310.002
Brand: POLINI
Reverse engine ignition nut with starter coupling. Replacement for Polini reverso minimoto. Polini Code: 143.310.002
Reference: 144.750.008
Brand: POLINI
Pair of Polini minibike mechanical brake pads, Polini minibike brake pads have a hole distance of 22 mm. CODE: 144.750.008
Reference: FRZ.HM3
Brand: CS Racing
Clutch Cs minimoto HAMMER EPIC. Clutch for minimoto compatible with Cs, Iame, Ghr, Bzm engines. This clutch must be used with an 81mm bell. Cs clutch models: - HAMMER GT Low friction coefficient, allows greater slip without affecting performance - HAMMER GP Medium-high friction coefficient - HAMMER EPIC High Coefficient
Reference: 112.354.10
Brand: GRC
Grc rubber crown protector 112.354.10
Reference: zoc100.0504
Brand: Zocchi
Minimoto clutch shim kit. Kit of washers for calibrating the minibike clutch weights. These "shims" are used to create the correct clearance between the bell and the minibike clutch. As a general rule, the total difference in diameter between the bell and the clutch must be 1 cm. (always check based on brand and model).
Reference: 143.340.001
Brand: POLINI
Polini minibike high voltage coil support bracket. Polini Code: 143.340.001
Reference: 143.565.001
Brand: POLINI
Polini 910 minimoto swingarm chain guide shoe. Polini code: 143.565.001
Reference: meteor36cs
Brand: Tecnominimoto
Piston diameter 36 Meteor for Cs Iame 40cc ROUNDED HEAD PISTON COMPLETE WITH RING AND PIN Technical features: Aluminum with a high percentage of silicon to ensure high resistance to heat Indeformability to temperature variations and corrosion on the piston crown. Graphite coating that guarantees a low coefficient of friction and running-in. Reinforced...
Reference: TCM120
Brand: Tecnominimoto
TCM junior minimoto exhaust for 10 and 12 mm flanged engines. Tecnomoto junior minimoto muffler for flanged 10 and 12 mm with non-decomposable manifold. Complete exhaust for minimoto with junior engine for 40cc 2t air-cooled engines, with 10 and 12 mm flange. Muffler compatible with: TCM / BZM / OR / POLINI / MALOSSI / ZOCCHI.
Reference: 001002R07300
Brand: DM
Fuel tap for DM minibike, for 4/6 mm hose, m10x1 thread. The minibike fuel tap is applied directly to the frame in the appropriate support (DM minibike). Thanks to its small size, the minibike fuel tap can be easily applied anywhere on the minibike. DM code: 001002R07300 Attention: does not include the nut.
Reference: 2005
Brand: STAMAS
Pair of Stamas brake caliper support studs.
Or seal for Polini 6.5 "(3.53X145.65) rim.
Polini Code: 143.355.003
