Xmotorstore Payments
Minimoto oversized water pump impeller diameter 35 mm. Compatible with grc, cs, tecnomoto water pump.
Minimoto oversized water pump impeller diameter 35 mm. Compatible with grc, cs, tecnomoto water pump.
Reference: 112.010.69
Brand: GRC
Minimoto water pump overhaul kit diameter 35 mm. The kit is universal, compatible with all minimoto water pumps.
Reference: 1015 R
Brand: STAMAS
Pair of adjustable Stamas footpeg support
Reference: MLL.0043
Brand: CS Racing
Black clutch springs wire 2, 7mm. The black springs are recommended on open engines, they allow a greater starting point.
Reference: 001001002000
Brand: DM
New DM minimoto frame kit midi 2025 full chrome 4 version. Compatible with Dm Junior and Senior minimoto bikes. Reduced weight of 700 grams from the previous version. Tubular top 20mm bottom 18mm. DM Code: 001001002000
Reference: 143.730.001
Brand: POLINI
Complete 5 "front Polini rim. Polini Code: 143.730.001
Reference: 143.160.011
Brand: POLINI
Polini minimoto clutch plate 143.160.011. Polini plate for Polini minimoto clutch with 2 masses. Original Polini minimoto clutch spare part.
Reference: 100
Brand: DM
Stainless steel spacers kit for rear hydraulic caliper support Dm.
Reference: 143.750.007
Brand: POLINI
Front brake disc for Polini minibike 122 mm, can be mounted on the right and left. We recommend the use of original Polini pads. Polini code: 143.750.007
Reference: 143.010.016
Brand: POLINI
Polini minimoto cylinder 143.010.016 Polini cylinder with air piston 5 ports d.36 COMPLETE WITH PISTON, BAND AND PIN. THE KIT DOES NOT INCLUDE THE HEAD.
Reference: 143.400.002
Brand: POLINI
Polini carbon reeds set 0.28 and 0.33 thick. Polini Code: 143.400.002
Reference: Ghr-marmitta-completa-40-air
Brand: GHR
Complete GHR exhaust system for 40cc 2-stroke air-cooled minimoto engines. Available with 10 mm flange, 12 mm flange, or for flange-less cylinders. 100% Made in Italy.
Reference: TCM0511
Brand: Tecnominimoto
CS Racing water pump overhaul kit. The CS Racing minibike water pump overhaul kit includes: Water pump bearings. Specific bearings for CS pump: 22x8x7 mm. O-rings. Water pump oil seal. Water pump impeller. Water pump circlip.
Reference: tcm028dm
Brand: Tecnominimoto
Dm replica 28 mm fork legs in black aluminum. DM minimoto fork legs, 28 mm diameter, in black anodized aluminum. Attention: It is necessary to mount the "feet" of the previous replaced fork legs. Kit refers to the pair.
Reference: 143.761.001
Brand: POLINI
Complete Polini petrol tap. Code: 143.761.001
Reference: GHR 021.002
Brand: GHR
Pair of Ghr engine crankcase spring pins. Pair of "pins" for mounting the Ghr engine crankcase, the pins are used to reduce the diameter of the lower hole of the crankcase, making it the correct size for the 8mm pin.
Minimoto oversized water pump impeller diameter 35 mm. Compatible with grc, cs, tecnomoto water pump.
