Minimoto stand Stamas

Reference: SCR.0290

Brand: CS Racing

Cs curve for 40cc and 50cc h2o engines

Cs curve for 40cc and 50cc h2o engines

Reference: 143.730.021+143.730.022

Brand: POLINI

Pair of Polini 5-spoke 6.5 "wheels

Pair of 6.5 inch Polini minimoto rims for 910 and 911 5-spoke. Front rim and rear rim 6.5 inches ideal for modifying the Polini minibike going from 5 inches to 6.5 to mount the rims it is necessary to mount custom spacers on the sides of the bearings, not included in the kit, the rear rim is already included with a pulley for pump transmission water for...

Reference: 10001

Brand: DM

Minibike gas tank universal

Minimoto petrol tank complete with cap, universal tank for Italian minibikes. Fuel pipe connection: 6mm Length: 18 cm Width: 15 cm Height (with cap): 13 cm Weight: 185 g

Reference: 5006

Brand: STAMAS

Front hub Stamas factory

Front hub Stamas factory including spacer and bearings.

Reference: 112.486.32

Brand: GRC

Insert for chain tool minimoto Grc

GRC chain tool replacement tip, total pin length 26 mm, thread length 20 mm, tip length 6 mm, thread diameter 8 mm. Grc Code: 112.486.32

Reference: GHR 012.001

Brand: GHR

Ghr fitting for water pipe

Ghr fitting for water pipe, compatible with head, cards, cylinder.

Reference: Estrattore-carter-motore-mini

Brand: XRACING

Minimoto engine crankcase extractor

Minibike crankcase puller. New in the minibike tool segment, a new universal minibike crankcase puller. The minibike crankcase puller is compatible with CS Racing engines and others, and is ideal for opening minibike engines without damaging the mounting holes. Puller dimensions: Outer hole spacing: 84 mm. Outer to center spacing: 58.5 mm.

Reference: 001002SP086B

Brand: DM

37mm silver trim adjustment kit for DM Midi

37mm silver trim adjustment kit for DM Midi DM Code: 001002SP086B 37mm silver trim adjustment kit for DM Midi

Reference: 6013

Brand: STAMAS

Seat rubber adhesive with full leather

Mini-bike saddle in double-sided rubber with full leather. Available in 4 colors.

Reference: 215.0224

Brand: POLINI

Polini 4.2 hp engine intake manifold

Polini 4.2 hp engine intake manifold, external diameter 19 mm (carburetor connection), internal diameter 15 mm. The manifold is compatible with 4.2 hp and Peugeot 103 minimoto engine. Polini Code: 215.0224

Reference: KOYO 60002

Wheel Bearings minimoto racing KOYO 10x26x8

KOYO racing minimoto wheel bearings 10x26x8, compatible with all minimoto bikes. The high-speed wheel bearings for minimoto allow you to improve the sliding of the minimoto when cornering.

Reference: 112.103.20

Brand: GRC

Complete Rear Hub GRC Minimoto Long 114 mm + Screws – Code 112.103.20

Complete rear hub for GRC minimoto, long version (114 mm), compatible with hydraulic rear brake systems. Code 112.103.20.

Reference: GHR 504.003

Brand: GHR

Ghr piston for 40cc engines

Ghr piston for 40cc air-cooled engines. From 2023 the GHR piston for air engines becomes one size (Tolerance 35.96/7).

Reference: 143.000.260

Brand: POLINI

Minibike Polini 910 hull Rs air 6,2 HP – ruote 6,5″ 143.000.260

Minimoto Polini 910 fairing S engine 6.2 hp Polini single-cylinder 2-stroke engine - aluminum cylinder Bore x stroke: 36 x 39 Displacement 36.69 cc Compression ratio: 16.2: 1 Carburetor: SHA 14-14 Ignition: Inductive discharge electronic Fuel: Unleaded petrol with 2% synthetic oil Intake: With reed valve in the crankcase Starting: Tear-off with...

Reference: 048

Brand: DM

Key For Cnc Frame Caps DM

Key For fitting / removing caps Chassis CNC minimoto DM. Wrench to screw and unscrew the aluminum frame caps of the DM minimoto. The wrench is machined from solid metal, ensuring precise measurements and resistance to use.

Reference: GHR 017.001

Brand: GHR

Oil cover Ghr including vines

Oil cover Ghr including vines