Xmotorstore Payments
Stamas rear brake disc diameter 122 mm.
Reference: FM6006-DMT
Brand: Formula
Formula radial rear brake system for minimoto with upgraded master cylinder and pads included. High performance for racing use.
Reference: 5011
Brand: STAMAS
Stamas front brake disc 148 mm diameter floating.
Reference: 5007
Brand: STAMAS
Rear hub Stamas standard / factory including spacer and bearings
Reference: 5007P
Brand: STAMAS
Stamas factory rear hub for pulley including spacer and bearings.
Reference: 1008 R
Brand: STAMAS
Stamas crown side chain guard
Reference: 143.190.002
Brand: POLINI
Set of bearings with caps for Polini scooter steering. Polini code: 143.190.002 Polini scooter steering bearings, last pieces available.
Reference: TCM60024
Brand: Tecnominimoto
Screw and bushing kit for Dm and Grc minimoto discs. Anti-unscrewing minimoto disc screw kit, it can also be used on hubs with stripped thread, thanks to the practical nut to be positioned on the inside of the disc. The disc screw kit is compatible with: Dm, Grc, Phantom.
Reference: 2021/28
Brand: STAMAS
Decomposable cnc collar 28 mm diameter Stamas
Reference: 8006
Brand: STAMAS
Pair of bushings for motor fixing on midi Stamas frame
Reference: GHR 067.015
Brand: GHR
15mm Ghr minimoto reed valve pack. The aluminum Ghr reed valve pack is compatible with Iame, Cs, Ghr, Bzm, Polini (6.2). To be used for racing engines.
Reference: 143.340.038
Brand: POLINI
Polini 910 S minimoto front fairing bracket. Code: 143.340.038. New reinforced version for greater resistance and sealing of the front fairing.
Reference: 6008/12
Brand: STAMAS
Stamas rear fender sr r factory. Code: 6008/12
Reference: 143.075.010
Brand: POLINI
Polini clutch side closed crankcase for reverse engine 143.075.010
Reference: 34 9806
Brand: Malossi
Malossi piston d.36 2t for mini bikes. All Malossi cylinders in cast iron and aluminum are divided into selection classes. They range from selection 0 (smallest piston) to selection D (largest piston). Each selection step is equivalent to an increase of 0.01 mm. When placing your order, carefully check your selection as shown in the example below:...
Reference: 011A
Brand: DM
Support for Gubellini steering damper for minibikes Dm. Support made in cnc, for Dm frame and Fg Gubellini steering damper.
Reference: 001002SP0110
Brand: DM
New DM pulley at the hub for water pump transmission diameter 100 lightened, or free. DM pulley sizes: internal diameter 45 mm, external diameter 100 mm, thickness 8.5 mm on the hub, external thickness 7 mm, OR channel 3 mm.
Reference: 001002SP095C
Brand: DM
Rear brake caliper support threaded pin for aluminum swingarm Dm. Threaded pin for swingarm Dm. Dm code: 001002SP095C
Reference: 127
Brand: DM
Complete radiator bracket kit for all DM models
Reference: 5013
Brand: STAMAS
Stamas rear hub pulley for water pump drive belt.
Reference: 1008 R
Brand: STAMAS
Stamas crown side chain guard
Stamas rear brake disc diameter 122 mm.
