Wheel Polini 5" front for double brake 143.730.003

Reference: 8002

Brand: STAMAS

Front axle Stamas fork standard

Front axle Stamas fork standard 

Reference: MAS.HM1

Brand: CS Racing

Clutch jaws Cs racing GT HAMMER 2.0

Pair of weights for GT HAMMER 2.0 two-mass clutches New HAMMER 2.0 clutches born from the experience of our technicians directly from the most important competition fields, it has immediately become an irreplaceable tool !!! Precisely this experience of ours in the world of race minibikes and beyond ... always leads us towards a continuous evolution and...

Reference: flangiaGHR

Brand: GHR

GHR 10 12 14 15 mm exhaust flange

Reference: 3009

Brand: STAMAS

Couple lever brake Stamas

Pair of Stamas brake levers, for mechanical cable brakes. The Stamas brake levers are adjustable, the distance of the lever from the knob is adjustable by means of a special screw. Compatible with 22mm half handlebars.

Reference: SCR.0290

Brand: CS Racing

Cs curve for 40cc and 50cc h2o engines

Cs curve for 40cc and 50cc h2o engines

Reference: 112.145.74

Brand: GRC

Front wheel pin 10x160 Grc

Front wheel pin 10x160 for hub (L) L.94 Grc

Reference: 143.002.003

Brand: POLINI

Engine Polini minibike h2o 6.2 hp 143.002.003

Polini minibike engine liquid cooled 6.2 hp displacement 40 cc 2 stroke. The engine is compatible with 910 and 911 mini bikes. Polini code: 143.002.003.

Reference: IMA-42200

Brand: CS Racing

Or dome Iame Cs

Or dome Iame Cs (5 pieces)

Reference: MT1000 Multy

Brand: PZ Racing

Pzracing MT1000 Multy engine rpm and temperature indicator

Engine rpm and temperature indicator Pzracing MT1000 Multy version. Its extremely compact dimensions, the presence of internal batteries, the inductive detection of engine rpm and the M6 temperature sensor make Multy suitable for every type of vehicle, from minibikes to higher engine capacities. In addition to real-time display of engine rpm, Multy...

Reference: 203 I

Brand: STAMAS

Pair fork Stamas factory midi d.25 inox

Pair of Stamas factory midi fork legs 25 mm diameter in stainless steel.

Reference: 001002R061A0

Brand: DM

Windshields black DM

Small screen for DM black color, compatible with original Dm fairings. DM Code: 001002R061A0

Reference: 112.153.05

Brand: GRC

Racing Brake Pads for PLK Radial Caliper – 2 Holes – Code 112.153.05

Sintered brake pad pair for PLK radial mechanical or hydraulic calipers. 2-hole mount with 22 mm spacing. Code 112.153.05.

Reference: 143.000.250

Brand: POLINI

Minibike Polini 910 Rs air 4,2 hp 6,5″ 143.000.250

Minimoto Polini 910 RS fairing with 4.2 hp air-cooled engine, 6.5-inch rims. Polini engine: 2 T single cylinder - Aluminum cylinder Bore x stroke: 36 x 39 Displacement: 36.69 Compression ratio: 16.2: 1 Carburetor: SHA 14-14 Ignition: Inductive discharge electronic Fuel: Unleaded petrol with 2% synthetic oil Intake: With reed valve in the crankcase...

Reference: TCM0601

Brand: Tecnominimoto

Detachable cylinder head for 40 and 50 cc TCM air-cooled minimoto cylinders

Detachable cylinder head for TCM 40 and 50 cc air-cooled minimoto cylinders. Detachable head with separate dome (not included). The head is compatible with: TCM, BZM, Orioli cylinders.

Reference: TCM32

Brand: Tecnominimoto

Bell carter Tcm For Carter Orioli

Carter bell Tcm For Carter Orioli. Tcm clutch bell housing for Or "Orioli" engines, the card is compatible with 40 and 50 cc 2t minibike engines. It includes the minibike bell bearing, already inserted in the cover.

Reference: 001002R002B0

Brand: DM

Spacer conical crown side Dm

Conical spacer on the crown side DM, the spacer must be inserted between the swingarm and the wheel bearing with the diameter of the narrowest cone towards the bearing. The wheel spacer Dm has the following measures: Hole diameter 10 mm Outside diameter 24 mm Outside diameter narrow part 15 mm Spacer thickness 10 mm Dm code: 001002R002B0