- New

Xmotorstore Payments
Minimoto water temperature sensor fitting in red ergal.
Xmotorstore presents its new product: Water temperature sensor fitting entirely machined from solid and anodized in red, particular attention has been paid to heat dissipation, thanks to the material that allows easy cooling.
The fitting fits easily into the minimoto water pipe, allowing the installation of the temperature sensor.
Technical features of the water temperature sensor fitting:
External diameter: 28 mm.
Internal diameter: 9 mm.
Diameter of the h2o pipe fitting: 12 mm.
Diameter for sensor: 9 mm (threaded for universal gpt, pzr and other sensors).
Length: 54 mm (including h2o pipe fittings).
Length: 18 mm (single h2o pipe fitting).
Corners: V-beveled, for easy installation even in the tightest spots.
Color: racing red.
Material: Ergal.
Minimoto water temperature sensor fitting in red ergal.
Xmotorstore presents its new product: Water temperature sensor fitting entirely machined from solid and anodized in red, particular attention has been paid to heat dissipation, thanks to the material that allows easy cooling.
The fitting fits easily into the minimoto water pipe, allowing the installation of the temperature sensor.
Technical features of the water temperature sensor fitting:
External diameter: 28 mm.
Internal diameter: 9 mm.
Diameter of the h2o pipe fitting: 12 mm.
Diameter for sensor: 9 mm (threaded for universal gpt, pzr and other sensors).
Length: 54 mm (including h2o pipe fittings).
Length: 18 mm (single h2o pipe fitting).
Corners: V-beveled, for easy installation even in the tightest spots.
Color: racing red.
Material: Ergal.
Reference: 001002SP1170
Brand: DM
Special shaped water pipes for minimoto with IAME CS BZM POLINI GHR engine. The tubes are pre-formed and compatible with all mini bikes.
Reference: 001002SP129A
Brand: DM
Red silicone shaped H20 tubes kit for all minimoto models. The only pre-formed minimoto water pipes compatible with all engines.
Reference: pmp.h2o.tcm
Brand: Tecnominimoto
Minibike water pump d.35 increased, increases the flow of water in the cooling system, ensuring better engine performance. We recommend the use of silicone tubing to achieve maximum water cooling performance. Universal water pump for minimoto. Attention: the color may vary based on the manufacturer's construction choices.
Reference: Vaschetta-uni-red
Brand: XRACING
Minimoto water tank in red ergal. Xmotorstore presents its new product: Radiator water tank entirely machined from solid and anodized in red, particular attention has been paid to heat dissipation, thanks to the external grooves that allow easy cooling. Technical characteristics of the water tank: External diameter: 32 mm. Internal diameter: 22.5 mm....
Reference: 5517516
Brand: Malossi
Malossi 5517516 flywheel and fan assembly Code: 5517516 Malossi flywheel and fan assembly for Vespower ignition. Flywheel dimensions diameter 125X42 mm
Reference: 01.SB.0902.L
Brand: Ohvale
Ohvale Bearing 6203 Code: 01.SB.0902.L
Reference: 3301.03
Brand: Domino
Domino 3301.03 throttle control with black knobs open. Technopolymer gas control with open black knobs. Support material: Technopolymer Black colour Max stroke: 50 mm Rapidity: 3.8 ° / mm Cable Type: Mono Cable
Reference: 211.0230
Brand: POLINI
Piaggio Si head diameter 38.4-41-43mm with central spark plug hole. Polini Code: 211.0230
Reference: 53 8906
Brand: Malossi
Malossi Rhq crankshaft 53 8906 for Piaggio engines Malossi code: 53 8906 Malossi Rhq crankshaft with 16 mm diameter pin and 52 mm stroke for Piaggio engines.
Reference: 950.830.040
Brand: POLINI
Polini Hi-Speed is an electronic device designed for e-bike engines in order to increase active assistance by fully exploiting the performance that the engine can offer. It is very easy to install as the connectors interface directly with them original. Installation takes just a few minutes. No need for settings as it is regulates. Without battery as it...
Reference: 104112
Brand: Motul
Motul 300V Factory line road racing oil 5W-40 4t 104112 (1 liter). For racing motorcycles equipped with high performance 4-stroke engines, with integrated and non-integrated gearboxes, with wet or dry clutches. Suitable for racing engines designed to operate in a wide range of temperatures and rpm: fast bikes, MotoGP, Supersport, Superbike, uphill races,...
Reference: 1116078B
Brand: Malossi
Complete Malossi gasket kit for FLANGED MOUNT cylinder kit diameter 47.6 - 52 (multi-thickness) Malossi code: 1116078B
Reference: 204.0190/A
Brand: POLINI
Motobecane piston 46 mm, selection A 204.0190 / A
Reference: TCMR1
Brand: Tecnominimoto
Red minibike bell housing 80 81 mm Tcm. Clutch cover for minibikes, universal.
Reference: 55 8627
Brand: Malossi
Malossi Tc Unit Rpm control electronic control unit 55 8627 for Honda Code: 55 8627 The incessant development of electronics in the motor sector has led Malossi to the creation and marketing of a complete line of electronic control units for road and racing scooters which embody maximum technology. Each control unit model has been expressly studied for...
Reference: 3118735
Brand: Malossi
Malossi cast iron cylinder kit diameter 46.5 with 12 diameter pin Malossi code: 3118735 Malossi cylinder kit for ITALJET PACK 50 2T. ATTENTION: BORING THE ORIGINAL CRANKCASE. Malossi cylinder kit for PIAGGIO BOSS 50 2T. ATTENTION: BORING THE ORIGINAL CRANKCASE. Malossi cylinder kit for PIAGGIO BOXER 50 2T. ATTENTION: BORING THE ORIGINAL CRANKCASE....
Reference: 252.0009
Brand: POLINI
Polini exhaust gasket 252.0009 Polini Yamaha Evolution kit exhaust gasket Polini exhaust gasket for: Aprilia, Aprilia Gulliver 50, Aprilia Rally 50, Aprilia Sonic 50, Aprilia Sr 50, Aprilia Scarabeo 50, Atala, Atala Carosello 50, Benelli, Benelli 491 50, Benelli K2 50, Benelli Naked 50, Beta, Beta Ark 50, Beta Quadra 50, Beta Eikon 50, Beta Tempo 50, Bsv,...
Reference: 03.IF.0133.L
Brand: Ohvale
Ohvale Gp-2 front disc fixing flange. Ohvale code: 03.IF.0133.L GP-2 220 mm floating front disc support flange.
Minimoto water temperature sensor fitting in red ergal.
Xmotorstore presents its new product: Water temperature sensor fitting entirely machined from solid and anodized in red, particular attention has been paid to heat dissipation, thanks to the material that allows easy cooling.
The fitting fits easily into the minimoto water pipe, allowing the installation of the temperature sensor.
Technical features of the water temperature sensor fitting:
External diameter: 28 mm.
Internal diameter: 9 mm.
Diameter of the h2o pipe fitting: 12 mm.
Diameter for sensor: 9 mm (threaded for universal gpt, pzr and other sensors).
Length: 54 mm (including h2o pipe fittings).
Length: 18 mm (single h2o pipe fitting).
Corners: V-beveled, for easy installation even in the tightest spots.
Color: racing red.
Material: Ergal.