- On sale!
- Reduced price
- New
Xmotorstore Payments
Reference: KOYO 60002
KOYO racing minimoto wheel bearings 10x26x8, compatible with all minimoto bikes. The high-speed wheel bearings for minimoto allow you to improve the sliding of the minimoto when cornering.
Reference: 143.000.261
Brand: POLINI
Minimoto Polini 910 Rs hull with 6.2 HP air motor, 6.5 inch wheels, white colour. Polini code: 143.000.261. Minimoto Polini 910 S hull 6.2 hp engine. Polini single-cylinder 2-stroke engine, aluminum cylinder. Bore x stroke: 36 x 39. Displacement 36.69cc. Compression ratio: 16.2:1. Carburettor: SHA 14-14. Ignition: Electronic inductive discharge. Power...
Reference: 143.765.012
Brand: POLINI
Complete rear right hydraulic brake for Polini GP5 and GP6 minimoto. Original Polini component – code 143.765.012.
Reference: 2020x2
Brand: STAMAS
Stamas clip-on handlebars for 25 mm forks, handlebar diameter 22 mm.
Reference: 143.170.002
Brand: POLINI
Polini minimoto water pump. Polini code: 143.170.002 Polini water pump for minimoto, the Polini water pump for minimoto is universal for all minimotos with an external pump.
Reference: 001002R075C0
Brand: DM
Storage shelf for workshop stand objects holder workshop stand dm. DM Code: 001002R075C0
Reference: TCM K2012
Brand: Tecnominimoto
TCM masses diameter 86mm. The spoking of the mass body increased by 20%, Teflon-coated bushing on the pin, racing friction paste, used by all types of engine, has also obtained excellent performance on official motorcycles, now different from the 86 bells. Currently the best on the market for duration, yield, and gluing. Recommended 2.6 mm springs...
Reference: 102-DM
Brand: DM
DM Junior minimoto trim variators. 3-adjustment trim variators, for Dm minimoto, compatible with mini and midi, for Junior. Material: aluminum. Color: Red (anodized). Use: Racing.
Reference: GHR 024.001
Brand: GHR
Coupling shaft 14/5 X 32.3 for Ghr connecting rod compatible with Bzm, Iame, Cs, Ghr shafts.
Reference: 144.270.002
Brand: POLINI
Removable aluminum bushing for minimoto manifold to switch from Dellorto phbg to sha 14 or 15 mm. Code: 144.270.002 Universal, to be inserted in the rubber manifold, transforming it into a connection for sha carburettors.
Reference: 112.284.12
Brand: GRC
Radiator Bushing + Anti-Vibration Rubber Grc 112.284.12 Grc Code: 112.284.12 Radiator Bushing + Anti-Vibration Rubber Grc
Reference: 043 DM
Brand: DM
New kit fork plates DM 28 diameter with OFF SET variation from 0 mm to + 2 mm or - 2mm. Tested and promoted with excellent results by the drivers of the Dm Official Team.
Reference: 6005
Brand: STAMAS
Complete front fairing raw Stamas factory. Front fairing in resin for Stamas minimoto.
Reference: zoc100.0504
Brand: Zocchi
Minimoto clutch shim kit. Kit of washers for calibrating the minibike clutch weights. These "shims" are used to create the correct clearance between the bell and the minibike clutch. As a general rule, the total difference in diameter between the bell and the clutch must be 1 cm. (always check based on brand and model).
Reference: 045A
Brand: DM
Throttle cable with long sheath for pocket bikes with phbg carburettor, this new version of longer throttle wire and sheath allow you to work on the carburettor, simply by extracting it from the intake manifold and positioning it outside the frame, without having to remove the throttle cable. Sheath length 100cm. Gas wire length 116.5 cm.
Reference: 2019
Brand: STAMAS
25 mm racing half handlebar with Stamas cnc bracelet
Reference: Koyo-6202C3-FG
Brand: XRACING
Pair of high-performance Koyo C3 engine bearings for racing minimoto engines. High reliability and smooth operation.
Stamas crown side wheel spacer