Xmotorstore Payments
TCM masses diameter 86mm.
The spoking of the mass body increased by 20%, Teflon-coated bushing on the pin, racing friction paste, used by all types of engine, has also obtained excellent performance on official motorcycles, now different from the 86 bells.
Currently the best on the market for duration, yield, and gluing.
Recommended 2.6 mm springs recommended range of use RPM 9400/9600 "after running in"
TCM masses diameter 86mm.
The spoking of the mass body increased by 20%, Teflon-coated bushing on the pin, racing friction paste, used by all types of engine, has also obtained excellent performance on official motorcycles, now different from the 86 bells.
Currently the best on the market for duration, yield, and gluing.
Recommended 2.6 mm springs recommended range of use RPM 9400/9600 "after running in"
Reference: TCMKITFR86M8
Brand: Tecnominimoto
TCM 86 mm complete clutch kit for minimoto engines. Fits Iame, BZM, CS, SG, TCM. Includes racing shoes, springs, bell, and hub.
Reference: 143.800.066
Brand: DM
DM front plastic shield. The disc protection for Dm minimoto is mandatory in competitions, and always recommended for use on the track. The Dm shield is compatible with all models of Dm mini bikes, using the special support, code 099. Dm code: 098
Reference: 143.034.002
Brand: POLINI
6.2 hp engine gasket kit Polini. Gaskets for 6.2 hp engine air and liquid minimoto. Minimoto Polini engine Gasket kit. Polini code: 143.034.002
Reference: 1023
Brand: STAMAS
Water tank support bracket for sr race factory Stamas frame
Reference: Pistone Ghr 50cc
Brand: GHR
Ghr piston for 50cc engines. Original Ghr piston for 50cc 2t racing engine, the piston is available in the following sizes: Ghr A piston 39.95. Ghr B piston 39.96. Ghr C piston 39.97. Ghr D piston 39.98. Select the desired size.
Reference: 143.070.003
Brand: POLINI
Reverso Polini crankcase couple. Polini Code: 143.070.003
Reference: 030
Brand: DM
Dm mini bike front fender supports, compatible with 28 mm and 25 mm forks, for plastic fender and carbon fender.
Reference: F00 005
Brand: DM
Rear hub dm for hydraulic brake Formula Lightened rear hub 114 mm DM weight 190g THE HUB DOES NOT INCLUDE THE BEARINGS
Reference: 143.750.027
Brand: POLINI
Original rear brake hose by Polini for GP5 minimoto. Compatible with AJP hydraulic brake system. High-performance racing spare part.
Reference: 001002R026B0
Brand: DM
Minimoto Dm standard wheel bearings, 10 pieces. DM Code: 001002R026B0
Reference: 143.400.002
Brand: POLINI
Polini carbon reeds set 0.28 and 0.33 thick. Polini Code: 143.400.002
Reference: 2013 A
Brand: STAMAS
Pair of Stamas factory midi fork tubes diameter 25 in aluminum.
Reference: GHR 022.001
Brand: GHR
GHR Engine Mount. Completely in stainless steel. Compatible with Bzm engine block, suitable for water pipe passage.
Reference: 112.104.00
Brand: GRC
Bearing kit plus spacer for hub Grc Select the desired measure between: 90/94/110/114. L.90 front (for mechanical brake) L.94 front (for hydraulic-mechanical brake) L.111 rear (for mechanical brake) L.114 rear (for hydraulic brake)
Reference: KT0.0029
Brand: CS Racing
Minimoto clutch spring guide (2 and 3 masses). Compatible with: Polini, Cs, Iame, Ghr, Bzm. The minimoto clutch spring guide is used to keep the masses sliding stable, without creating unwanted twists or vibrations.
Reference: 7010
Brand: STAMAS
Torque spacers aluminium for fixing head engine h2o Stamas
Reference: MAS.HM3
Brand: CS Racing
Pair of weights for EPIC HAMMER 2.0 two-mass clutches New HAMMER 2.0 clutches born from the experience of our technicians directly from the most important competition fields, it has immediately become an irreplaceable tool !!! Precisely this experience of ours in the world of race minibikes and beyond ... always leads us towards a continuous evolution and...
TCM masses diameter 86mm.
The spoking of the mass body increased by 20%, Teflon-coated bushing on the pin, racing friction paste, used by all types of engine, has also obtained excellent performance on official motorcycles, now different from the 86 bells.
Currently the best on the market for duration, yield, and gluing.
Recommended 2.6 mm springs recommended range of use RPM 9400/9600 "after running in"
