Xmotorstore Payments
Perforated barrel for XRACING minibike silencer, designed to lower decibels ensuring an efficient exit of the exhaust gases.
Outer diameter: 18mm
Inner diameter: 16mm
Length: 196mm
Perforated barrel for XRACING minibike silencer, designed to lower decibels ensuring an efficient exit of the exhaust gases.
Outer diameter: 18mm
Inner diameter: 16mm
Length: 196mm
Reference: 228.0001
Brand: POLINI
Long exhaust muffler spring (70mm) 228.0001
Reference: FON.XRACING
Brand: XRACING
Special Xracing sound-absorbing silencer universal for all minimoto silencers. Special composite with steel mesh, guarantees better performance by exploiting better gas output from the perforated barrel, guarantees a unique level of sound absorption. ✔️compatible with Dm ✔️compatible with Cs ✔️compatible with Iame ✔️compatible with Ghr ✔️compatible with...
Reference: SIL.001
Brand: XRACING
60mm tubular carbon for Xracing silencer. Replacement for XRacing minimoto silencer.
Reference: supp.moll.sil
Brand: XRACING
XRacing silencer spring support. 100% made in Italy stainless steel product.
Reference: 3217172
Brand: Malossi
Malossi WILD LION approved exhaust Malossi code: 3217172 Malossi exhaust for APRILIA SR MOTARD 50 2T euro 2. TYPE: C50 var. 2 ver. 00, for vehicles produced 2013->. The "TYPE" only specifies for which model the approval is valid, it does not limit its assembly. Malossi exhaust for DERBI VARIANT Sport 50 2T. ** Not approved for this vehicle ** The lack...
Reference: 112.486.04
Brand: GRC
Clutch locking key for minimoto 2 and 3 masses, Quick coupling. Quick, simple and effective clutch stop wrench to work on the clutch locking it to the crankcase, compatible with Polini, Iame, Cs, Ghr. Code: 112.486.04
Reference: SIL.001
Brand: XRACING
60mm tubular carbon for Xracing silencer. Replacement for XRacing minimoto silencer.
Reference: 124
Brand: DM
Fork plates Dm 25 mm for Bzm fg shock absorber (2 pieces). Dm Code: 124
Reference: 03.FA.0306.L
Brand: Ohvale
Ohvale GP-2 front wheel axle with OHracing forks. Ohvale code: 03.FA.0306.L Wheel axle for Ohracing forks Ohvale Gp-2, the specific wheel axle for the new Ohvale OHracing forks. Attention: if you switch from standard forks to OHracing, complete the kit with the spacer code 03.RP.0007.L
Reference: 311.0112
Brand: POLINI
Fitting for Polini cylinder head M20x1. Polini code: 311.0112
Reference: 29 7715
Brand: Malossi
Malossi RACING spring set for original clutch Malossi code: 29 7715 RACING SPRING for ORIGINAL clutch Springs in pre-hardened carbon steel with high yield strength, protected by a high heat resistance paint in various colours. The different colouring highlights the load of each series of springs.
Reference: 01.SB.0208.L
Brand: Ohvale
Ohvale Bolt M6x23 Code: 01.SB.0208.L
Reference: 204.0829/A
Brand: POLINI
Polini piston diameter 50 mm selection A (49.945 mm) Polini piston for: Aprilia, Aprilia RX-SX 50, Aprilia RS 50, Aprilia RS4 50, Bultaco, Bultaco Astro 50, Bultaco Lobito 50, Derbi, Derbi GPR 50, Derbi Senda 50 DRD R, Derbi Senda 50 DRD SM, Derbi Senda 50 DRD, Derbi SM, Derbi Senda 50 Extreme, Derbi Senda 50 Extreme SM, Derbi Senda 50 R, Gilera, Gilera...
Reference: 31 8573
Brand: Malossi
Malossi cast iron cylinder kit diameter 40 with pin diameter 12 Malossi code: 31 8573 Malossi cylinder kit for PEUGEOT BUXY 50 2T. Malossi cylinder kit for PEUGEOT BUXY RS 50 2T. Malossi cylinder kit for PEUGEOT ELYSEO 50 2T. Malossi cylinder kit for PEUGEOT LOOXOR 50 2T. Malossi cylinder kit for PEUGEOT METAL-X 50 2T. Malossi cylinder kit for PEUGEOT...
Reference: Full-Control-Vision
Brand: CAPIT
Capit Full Control Vision Motorcycle Tyre Warmers The Capit Full Control Vision motorcycle tyre warmers were developed directly from the world of MotoGP, now also offered to an audience of non-professional riders. Very high performance for this top of the range Capit tyre warmer that is able to heat not only the tyre and its shoulder but also the wheel...
Reference: 01.SZ.0217.L
Brand: Ohvale
Ohvale Pin shaft guide roller Code: 01.SZ.0217.L
Reference: 3218858
Brand: Malossi
Malossi RX Black Exhaust for Honda SH Malossi Code: 3218858 Malossi exhaust for Honda SH i ABS 125 ie 4T LC euro 5 2020. Malossi exhaust for Honda SH i ABS 150 ie 4T LC euro 5 2020.
Reference: 143.340.042
Brand: POLINI
Polini silencer support bracket and tail. Polini Code: 143.340.042
Perforated barrel for XRACING minibike silencer, designed to lower decibels ensuring an efficient exit of the exhaust gases.
Outer diameter: 18mm
Inner diameter: 16mm
Length: 196mm
