Xmotorstore Payments
Stainless steel chain puller to save minimoto swingarm dm from 2012, 2 pieces
Stainless steel chain puller to save minimoto swingarm dm from 2012, 2 pieces
Reference: 001002SP1200
Brand: DM
Rear wheel axle for steel swingarm since 2008 DM
Reference: 100
Brand: DM
Stainless steel spacers kit for rear hydraulic caliper support Dm.
Reference: KOYO 60002
KOYO racing minimoto wheel bearings 10x26x8, compatible with all minimoto bikes. The high-speed wheel bearings for minimoto allow you to improve the sliding of the minimoto when cornering.
Reference: 112.240.14
Brand: GRC
Lower motor pin Grc d.14 midi rrz-3
Reference: meteor36cs
Brand: Tecnominimoto
Piston diameter 36 Meteor for Cs Iame 40cc ROUNDED HEAD PISTON COMPLETE WITH RING AND PIN Technical features: Aluminum with a high percentage of silicon to ensure high resistance to heat Indeformability to temperature variations and corrosion on the piston crown. Graphite coating that guarantees a low coefficient of friction and running-in. Reinforced...
Reference: 7009
Brand: STAMAS
Pair of aluminum spacers for fixing the air motor head on Stamas minimoto
Reference: SKU 978
Brand: Tecnominimoto
Minibike twister bell. Bell for pocket bikes, twister model, with m.8 thread, available in diameter: 78, 79, 80, 81 mm. Spheroidal cast iron bell.
Reference: GHR 021.002
Brand: GHR
Pair of Ghr engine crankcase spring pins. Pair of "pins" for mounting the Ghr engine crankcase, the pins are used to reduce the diameter of the lower hole of the crankcase, making it the correct size for the 8mm pin.
Reference: 143.270.016
Brand: POLINI
Intake manifold diameter 19 for Polini reverse engine. Manifold suitable for Polini gp3 gp4 gp5 gp6 with reverse engine. Polini code: 143.270.016
Reference: 058DM
Brand: DM
Rear Hub 116 Mm 5 Holes Sprocket with bearings
Reference: Or.tra.L
Brand: GRC
Or pump drive to wheel, or connect the water pump pulley to the rear wheel hub pulley.
Reference: GHR 080.001
Brand: GHR
Flywheel rotor diameter 80 mm for Ghr engine complete with levers. Ghr code: GHR 080.001
Reference: F00 005
Brand: DM
Rear hub dm for hydraulic brake Formula Lightened rear hub 114 mm DM weight 190g THE HUB DOES NOT INCLUDE THE BEARINGS
Reference: 001002A00900
Brand: DM
Pair of Dm minimoto spacers for water engine head
Reference: 143.600.001
Brand: POLINI
High voltage Polini minimoto coil, suitable for 4.2 and 6.2 Polini engines. Polini Code: 143.600.001
Reference: 001002A01000
Brand: DM
Screw kit plus rubbers plus spacers for DM minimoto fairing. The DM fairing hardware kit includes 5 grommets, 5 turned bushings, 5 Allen screws, 2 screws. DM Code: 001002A01000
Reference: IMG-02000-15
Brand: CS Racing
Reed valve Cs for minimoto. The Cs reed valve pack allows greater performance thanks to the viton coating. Divert flows not included.
Reference: 143.425.033
Brand: POLINI
Muffler for Polini minimoto with 6.2 hp engine. Polini Code: 143.425.033
Stainless steel chain puller to save minimoto swingarm dm from 2012, 2 pieces
