Xmotorstore Payments
Rear fender Grc abs.
Grc Code: 112.455.10
Reference: XR.CNF.001
Brand: XRACING
Perforated barrel for XRACING minibike silencer, designed to lower decibels ensuring an efficient exit of the exhaust gases. Outer diameter: 18mm Inner diameter: 16mm Length: 196mm
Reference: 143.420.001
Brand: POLINI
Polini 910 rear brake caliper lever with spring. Polini 910 mini bike rear brake caliper lever with return spring included. Polini Code: 143.420.001
Reference: 143.355.001
Brand: POLINI
Or water pump transmission (142.5x3.53 mm). Polini code: 143.355.001. Or water pump transmission for minimoto.
Reference: GHR 001.003
Brand: GHR
Minibike engine Ghr gp1 h2o 50 factory racing without carburetor, filter and muffler. The Ghr engine block is applicable on any Italian minimoto, such as: Dm, Grc, Stamas. We recommend combining the original Ghr muffler. TYPE: Single cylinder two stroke SUPPLY: Lamellar input CARBURETTOR: Dell'orto PHBG D. 21 (not included) BORE: 40 nominal RACE: 39.6...
Reference: 143.730.002
Brand: POLINI
Complete 5 "rear Polini rim. Polini Code: 143.730.002
Reference: 123A
Brand: DM
Minimoto Dm Junior 2025 footpeg supports New Dm footpeg supports for Junior riders. This 2025 update of the Dm minimoto improves the handling of the chassis thanks to the specific foot position for Junior riders.
Reference: 143.415.006
Brand: POLINI
Polini 910 RS minimoto fork plates. Fork plates 2WB for straight steerer. Polini Code: 143.415.006 Polini minimoto fork plates in aluminum. Color: gray Total width: 170 mm. Hole diameter for stem: 24 mm. Steering stem pin diameter: 10 mm. Fork stem center distance: 134 mm. The kit includes the necessary screws for assembly.
Reference: 143.195.002
Brand: POLINI
Minibike roller cage 10x13x14.5 mm. Roller cage for 10mm gudgeon pin, 13mm outer diameter, 14.5mm length.
Reference: RP1000 RPM
Brand: PZ Racing
Digital tachometer and hour meter rpm rp1000 micro series Pzracing. Its very small size, internal batteries and inductive detection of engine revolutions make the tachometer usable on any type of vehicle, from mini-bikes to maxi-engined engines. In addition to displaying engine revolutions in real time, RPM RP1000 stores the number of engine operating...
Reference: tcm201835
Brand: Tecnominimoto
DM red front hub, universal for new and old model rims.
Reference: PT0.0021
Brand: CS Racing
CS Racing minimoto clutch plate. Dual-mass clutch plate, compatible with CS, Polini, BZM, IAME, TCM clutches, and others. Dedicated clutch plate for Junior A and Junior B single-engine bikes! CIV approved.
Reference: 001002SP1280
Brand: DM
Dm factory minimoto stickers kit. Graphic version for official Dm minibike. ATTENTION: THE STICKERS CAN BE MODIFIED BY DM TELAI WITHOUT NOTICE FOR BETTER AESTHETICS AND/OR SPONSOR NEEDS, XMOTORSTORE IS COMMITTED TO ALWAYS PROVIDE THE MOST UPDATED VERSION.
Reference: TCM020
Brand: Tecnominimoto
Clip-on handlebars and clamps for 25 mm minimoto forks. This kit includes: 2 clip-on handlebars, 22 mm in diameter, for 25 mm forks. 2 clip-on handlebar clamps for 25 mm forks. 4 screws.
Reference: FM10192-40
Brand: Formula
Formula minibike rear braided brake hose M8 - M6. Formula code: FM10192-40 Formula hydraulic rear brake hose for minibikes, specific for versions from 2023 onwards, with M8 pump side connection and M6 caliper connection.
Reference: 143.400.002
Brand: POLINI
Polini carbon reeds set 0.28 and 0.33 thick. Polini Code: 143.400.002
Reference: 143.160.014
Brand: POLINI
Complete clutch 2 masses for Polini Reverso mini-motorcycle engine. Polini code: 143.160.014
Rear fender Grc abs.
Grc Code: 112.455.10
