Central footboards Supports Dm (2pz.)

Reference: FM40064-20

Brand: Formula

Formula front pump lever fixing screw kit

Formula front pump lever fixing screw kit for minibikes and minicross. This pin is an original Formula replacement, and is compatible with original implants.

Reference: 047

Brand: DM

Dm minimoto frame caps red

Dm minimoto frame caps red, 4 pieces.

Reference: IMH-04000-40-C

Brand: CS Racing

Cs muffler for h2o engine (40cc or 50cc)

Cs muffler for h2o engine (40cc or 50cc).

Reference: TCMINI49

Brand: Tecnominimoto

Red minimoto Rim for Dm Grc Tcm

Minibike rim red for Dm Grc Tcm. Minibike rim with new racing design, entirely machined from solid, 58 mm internal groove section. Rim compatible with hubs: TCM, DM, GRC and CBM.

Reference: 112.145.67

Brand: GRC

Distance kit modification of antique hub short L.90 to long L.94

Spacer for front hub-disc 3 holes L.4 mm. for plumbing. Weight 9grams

Reference: Pistone IAME 50cc

Brand: CS Racing

Piston Iame Cs 50cc

Iame Cs piston for 50cc minimoto engines. It is advisable to maintain a tolerance of about 5 hundredths of a millimeter between the cylinder and the piston. The abbreviations R and V indicate the tolerances R = tolerance 0 + 0.01 mm V = tolerance 0 - 0.01 mm

Reference: 001002R07300

Brand: DM

Gasoline tap minimoto DM

Fuel tap for DM minibike, for 4/6 mm hose, m10x1 thread. The minibike fuel tap is applied directly to the frame in the appropriate support (DM minibike). Thanks to its small size, the minibike fuel tap can be easily applied anywhere on the minibike. DM code: 001002R07300 Attention: does not include the nut.

Reference: M40ENGFH2CP

Brand: CS Racing

Complete Cs engine 50cc

Cs Complete h20 Factory engine, the kit includes: Factory 50cc engine block, complete with cnc racing shaft, clutch cover and cnc ignition, complete hammer clutch, oversized cnc head -Dedicated racing exhaust -Official Team silencer -Carburetor Cs

Reference: 143.630.015

Brand: POLINI

Complete front wheel axle 911 143.630.015

Front wheel pin with spacers for Polini 910/911 minimoto for mounting 6.5 "rims code 143.630.015

Reference: 5014

Brand: STAMAS

Water pump support bracket rear Stamas

Stamas rear water pump support bracket

Reference: 143.750.027

Brand: POLINI

Rear Brake Hose Polini GP5 143.750.027 for AJP Hydraulic System

Original rear brake hose by Polini for GP5 minimoto. Compatible with AJP hydraulic brake system. High-performance racing spare part.

Reference: 2020/28x2

Brand: STAMAS

Pair of half handlebars Stamas 28 mm

Pair of 22 mm Stamas handlebars for 28 mm forks.

Reference: GHR 010.001

Brand: GHR

Kit gaskets Ghr complete engine 50cc

Complete 50cc engine Ghr gasket kit. The kit includes: - Cylinder base gaskets Ghr: 0.05 - 0.10 - 0.20 - 0.50 - Oring studs 5 pcs - Upper and lower dome oring (viton) 1 pc each - Oring head collision 1 pc - Oring viton exhaust 1 pc - Manifold and reed valve gaskets 1 pc each

Reference: flangiaGHR

Brand: GHR

GHR 10 12 14 15 mm exhaust flange

Reference: ia3994

Brand: Tecnominimoto

Piston for Cs 50cc d.40

Round head piston complete with segment and pin. Technical features: Aluminum with a high percentage of silicon to ensure high resistance to heat. Non-deformable due to temperature variations and corrosion on the piston crown. Graphite coating that guarantees a low coefficient of friction and running-in. Crowned roof reinforced to withstand the stresses...

Reference: GHR 036.001

Brand: GHR

Clutch kit 2 masses Ghr

Clutch kit 2 masses Ghr