Xmotorstore Payments
DM front plastic shield. The disc protection for Dm minimoto is mandatory in competitions, and always recommended for use on the track. The Dm shield is compatible with all models of Dm mini bikes, using the special support, code 099.
Dm code: 098
DM front plastic shield. The disc protection for Dm minimoto is mandatory in competitions, and always recommended for use on the track. The Dm shield is compatible with all models of Dm mini bikes, using the special support, code 099.
Dm code: 098
Reference: 001002A02500
Brand: DM
Minibike front fender Dm. New 2024 version in "fiber" composite material. The new DM minibike mudguard is also compatible with previous versions, with 25 and 28 mm fork tubes.
Reference: 001002R01600
Brand: DM
Bushings kit for DM minimoto floating front disc. The floating bushings allow a better performance of the disc of your minimoto. DM Code: 001002R01600
Reference: pastiglie.XR
Brand: XRACING
New brake pads Formula by Xmotorstore.com, increased and sintered. MADE IN ITALY Durability and reliability and guaranteed. Designed and tested for use race and training. Suitable for all Formula brakes hydraulic front and rear. Compatible on all hydraulic pliers formula, dm, grc, polini, Stamas and others.
Reference: 129
Brand: DM
New DM minimoto front brake disc. The new Grimeca disc for Dm guarantees better performance and reliability than previous versions, the new design was created to improve the braking performance of your DM mini-bike in every aspect. Ideal for use with oversized sintered pads. Weight: 215g Thickness: 2.5cm
Reference: 112.153.05
Brand: GRC
Sintered brake pad pair for PLK radial mechanical or hydraulic calipers. 2-hole mount with 22 mm spacing. Code 112.153.05.
Reference: A02600
Brand: DM
Dm rear mudguard for Dm minimoto with steel swingarm. Resin mudguard, in black color. Attention: for pre 2008 versions.
Reference: 001002SP095D
Brand: DM
Rear wheel pin for aluminum swingarm Dm
Reference: GHR 014.002
Brand: GHR
Gasket kit oring cylinder Ghr 50cc
Reference: 143.246.001
Brand: POLINI
Rubber cap for Polini 910 minimoto tank cover. Polini code: 143.246.001
Reference: ZOC.200.0301
Brand: Zocchi
Zocchi crown holder pulley. Universal support for minimoto crown, the support includes the housing for the minimoto water pump o-ring.
Reference: 1008 R
Brand: STAMAS
Stamas crown side chain guard
Reference: 143.680.001
Brand: POLINI
Revision starter kit Polini minibike. Polini code: 143.680.001
Reference: zocchi-1000102-C2
Brand: Zocchi
Replacement clutch shoes for minimoto Zocchi C2. Pair of clutch shoes Zocchi version C2. Compatible with Zocchi plate for long shoes.
Reference: 143.340.042
Brand: POLINI
Polini silencer support bracket and tail. Polini Code: 143.340.042
Reference: 2035 7 18NC
Brand: PBR
Reinforced M8 Z7 minimoto sprocket. Pinion for Polini minimoto.
Reference: GHR 026.001
Brand: GHR
Roller cage for Ghr big end. Roller cage measures 14X18X10 mm (shaft axis side).
Reference: TCM3201
Brand: Formula
Grub screw kit for Formula minimoto brake fittings, including 2 grub screws and 1 oring.
Reference: GHR 021.002
Brand: GHR
Pair of Ghr engine crankcase spring pins. Pair of "pins" for mounting the Ghr engine crankcase, the pins are used to reduce the diameter of the lower hole of the crankcase, making it the correct size for the 8mm pin.
Reference: 053
Brand: DM
Universal Dual Cable mini-bike off button, compatible with all mini-bikes. This switch can be installed on any handlebar with a diameter of 22 mm 7/8 inches, it is effective for turning off the minimoto with a simple button. Cable length 80cm. Cables already prepared for Selettra and Polini minibike coil attachment.
Reference: 001002SP1300
Brand: DM
Dm mini bike rear fender for aluminum swingarm 2023. Dm Code: 115
DM front plastic shield. The disc protection for Dm minimoto is mandatory in competitions, and always recommended for use on the track. The Dm shield is compatible with all models of Dm mini bikes, using the special support, code 099.
Dm code: 098
