Adjustable steering damper gp5 143.710.005

Reference: 112.110.00

Brand: GRC

Front wheel axle 10x155 Grc for hub (C) L.90 112.110.00

Front wheel axle 10x155 Grc for hub (C) L.90 112.110.00 Grc code: 112.110.00 Front wheel axle size 10x155 mm Grc for hub (C) L.90.

Reference: tcm201835

Brand: Tecnominimoto

Front hub DM red TCM

DM red front hub, universal for new and old model rims.

Reference: 2010/28

Brand: STAMAS

Pair plates for fork stems d.28 factory Stamas

Pair plates for fork stems d.28 factory Stamas

Reference: FM6006-DMT

Brand: Formula

Formula Radial Rear Brake System for Minimoto FM6006-DMT

Formula radial rear brake system for minimoto with upgraded master cylinder and pads included. High performance for racing use.

Reference: 2011

Brand: STAMAS

Torque steering stops running Stamas

Stamas steering stop torque. The travel stops are placed on the front fork plates, to prevent the steering damper from breaking with an excessive steering or a fall blow.

Reference: 143.630.007

Brand: POLINI

Engine support pin with nuts minimoto Polini 910 S RS 143.630.007

Engine support pin with nuts minimoto Polini 910 S RS. Polini code: 143.630.007 Upper engine support pin minimoto Polini, model 910 R RS.

Reference: 7008

Brand: STAMAS

Internal spacer hub rear standard Stamas

Stamas standard internal rear hub spacer

Reference: 001002R026A0

Brand: DM

Pair of rear wheel bearings with 120 DM spacer

Pair of rear wheel bearings and spacer 120 DM. DM Code: 001002R026A0

Reference: 143.000.261

Brand: POLINI

Minimoto Polini 910 Rs air fairing 6.2 HP wheels 6.5 inches white 143.000.261

Minimoto Polini 910 Rs hull with 6.2 HP air motor, 6.5 inch wheels, white colour. Polini code: 143.000.261. Minimoto Polini 910 S hull 6.2 hp engine. Polini single-cylinder 2-stroke engine, aluminum cylinder. Bore x stroke: 36 x 39. Displacement 36.69cc. Compression ratio: 16.2:1. Carburettor: SHA 14-14. Ignition: Electronic inductive discharge. Power...

Reference: 143.730.003

Brand: POLINI

Wheel Polini 5" front for double brake 143.730.003

Polini front 5 "rim for double brake. Polini Code: 143.730.003

Reference: 112.105.11

Brand: GRC

Pulley or pump hub GRC

GRC pulley or hub pump lightened

Reference: supporto-Alfano-Blata

Brand: Blata

Alfano support for Blata minimoto

Reference: GHR 001.003

Brand: GHR

Ghr engine gp1 h2o 50 factory racing

Minibike engine Ghr gp1 h2o 50 factory racing without carburetor, filter and muffler. The Ghr engine block is applicable on any Italian minimoto, such as: Dm, Grc, Stamas. We recommend combining the original Ghr muffler. TYPE: Single cylinder two stroke SUPPLY: Lamellar input CARBURETTOR: Dell'orto PHBG D. 21 (not included) BORE: 40 nominal RACE: 39.6...

Reference: 143.765.012

Brand: POLINI

Freno idraulico posteriore destro Polini GP6 / GP5 – Codice 143.765.012

Complete rear right hydraulic brake for Polini GP5 and GP6 minimoto. Original Polini component – code 143.765.012.

Reference: TCM03

Brand: Tecnominimoto

Complete clutch 86mm diameter Sintracing TCM

Complete minibike clutch diameter 86 mm TCM sintracing. Model K2.

Reference: 143.340.001

Brand: POLINI

High voltage coil support bracket 143.340.001

Polini minibike high voltage coil support bracket. Polini Code: 143.340.001