Xmotorstore Payments
Brake pads for Stamas mechanical caliper.
Brake pads for Stamas mechanical caliper.
Reference: Prf post DM carbo
Brand: DM
Carbon rear fender for DM with aluminum swingarm from 2012 onwards. The lightest DM fender, only 35 grams. Compatible with original attachments, no changes are required.
Reference: 001002R002B0
Brand: DM
Conical spacer on the crown side DM, the spacer must be inserted between the swingarm and the wheel bearing with the diameter of the narrowest cone towards the bearing. The wheel spacer Dm has the following measures: Hole diameter 10 mm Outside diameter 24 mm Outside diameter narrow part 15 mm Spacer thickness 10 mm Dm code: 001002R002B0
Reference: 143.800.066
Brand: DM
DM front plastic shield. The disc protection for Dm minimoto is mandatory in competitions, and always recommended for use on the track. The Dm shield is compatible with all models of Dm mini bikes, using the special support, code 099. Dm code: 098
Reference: 2016/28
Brand: STAMAS
Cnc support for factory hydraulic front brake caliper plus screws for 28 mm stems
Reference: 001002SP1300
Brand: DM
Dm mini bike rear fender for aluminum swingarm 2023. Dm Code: 115
Reference: TCM60024
Brand: Tecnominimoto
Screw and bushing kit for Dm and Grc minimoto discs. Anti-unscrewing minimoto disc screw kit, it can also be used on hubs with stripped thread, thanks to the practical nut to be positioned on the inside of the disc. The disc screw kit is compatible with: Dm, Grc, Phantom.
Reference: SCR.0287
Brand: CS Racing
Cs exhaust curve for flanged motors, standard version. Available: Cs exhaust curve for flange 10 motor. Cs exhaust curve for flange 12 motor. Cs exhaust curve for 15 flange motor. Cs exhaust curve for flanged engine.
Reference: 2021/28
Brand: STAMAS
Decomposable cnc collar 28 mm diameter Stamas
Reference: 0H5-5320-00 (USB CABLE COMP.)
Brand: Arianetech
USB cable for Ariane K2RE minibike control unit calibration. Cable for connection to the control unit of the Ariane K2RE electric minibike, the cable is necessary for setting the power of the minibike. With the cable and the appropriate program supplied separately, it will be possible to connect to the control unit and calibrate the minibike to your liking.
Reference: TCM K2012
Brand: Tecnominimoto
TCM masses diameter 86mm. The spoking of the mass body increased by 20%, Teflon-coated bushing on the pin, racing friction paste, used by all types of engine, has also obtained excellent performance on official motorcycles, now different from the 86 bells. Currently the best on the market for duration, yield, and gluing. Recommended 2.6 mm springs...
Reference: Puleggia-ricambio-h2o
Brand: GRC
Replacement pulley for minimoto water pump. Universal replacement pulley for minimoto water pump. Outer diameter: 39 mm. Inner diameter: 8 mm. Compatible with Grc, Tcm, Cs, Bzm water pump, and others.
Reference: 030
Brand: DM
Dm mini bike front fender supports, compatible with 28 mm and 25 mm forks, for plastic fender and carbon fender.
Reference: TCM020
Brand: Tecnominimoto
Clip-on handlebars and clamps for 25 mm minimoto forks. This kit includes: 2 clip-on handlebars, 22 mm in diameter, for 25 mm forks. 2 clip-on handlebar clamps for 25 mm forks. 4 screws.
Reference: 6010
Brand: STAMAS
Stamas sr standard disc protection.
Reference: 045
Brand: DM
Gas wire and sheath for Phbg carburetor and quick throttle control.
Brake pads for Stamas mechanical caliper.
