- New

Xmotorstore Payments
Minimoto water tank vent fitting.
Tank vent measurements:
Total length: 22 mm.
Thread length: 6 mm.
Pipe connection length: 12 mm.
Nut length: 4 mm.
Thread diameter: 6 mm.
Pipe connection diameter: 5.5 mm.
Internal diameter: 3.5 mm.
Minimoto water tank vent fitting.
Tank vent measurements:
Total length: 22 mm.
Thread length: 6 mm.
Pipe connection length: 12 mm.
Nut length: 4 mm.
Thread diameter: 6 mm.
Pipe connection diameter: 5.5 mm.
Internal diameter: 3.5 mm.
Reference: 001002SP1170
Brand: DM
Special shaped water pipes for minimoto with IAME CS BZM POLINI GHR engine. The tubes are pre-formed and compatible with all mini bikes.
Reference: 001002SP129A
Brand: DM
Red silicone shaped H20 tubes kit for all minimoto models. The only pre-formed minimoto water pipes compatible with all engines.
Reference: 132
Brand: DM
Increased Dm minibike radiator, the oversized Dm radiator is dedicated to racing minibikes, it allows better engine cooling even in the most extreme conditions of use. Radiator weight Dm: 566 grams Pipe connections: 10 mm Attention: Artisan radiator handmade to order, delivery time 30 days.
Reference: pmp.h2o.tcm
Brand: Tecnominimoto
Minibike water pump d.35 increased, increases the flow of water in the cooling system, ensuring better engine performance. We recommend the use of silicone tubing to achieve maximum water cooling performance. Universal water pump for minimoto. Attention: the color may vary based on the manufacturer's construction choices.
Reference: 243.087
Brand: POLINI
Polini contrast spring for Piaggio Vespa 125 Primavera 4T Code: 243.087 Spring with 2 stops Application: Vespa, Vespa 125 4T Primavera 3V ie, Vespa 125 4T Sprint 3V ie, Vespa 150 4T Sprint 3V ie, Vespa 125 4T Primavera iGET 3V ie E4, Vespa 125 4T Sprint iGET 3V ie E4, Vespa 150 4T Sprint iGET 3V ie E4, Piaggio, Piaggio Liberty 125 3V ie from 2013 to 2014,...
Reference: 215.0454
Brand: POLINI
Piaggio 35mm intake manifold sleeve. Polini Code: 215.0454
Reference: 3118734
Brand: Malossi
Malossi cylinder kit diameter 46.5 in cast iron with pin diameter 10 Malossi code: 3118734 Malossi cylinder kit for ITALJET PACK 50 2T. ATTENTION: BORING THE ORIGINAL CRANKCASE. Malossi cylinder kit for PIAGGIO CIAO 50 2T. ATTENTION: BORING THE ORIGINAL CRANKCASE. Malossi cylinder kit for PIAGGIO CIAO PX 50 2T. ATTENTION: BORING THE ORIGINAL CRANKCASE.
Reference: 200.0331
Brand: POLINI
Polini Original 2 muffler for Mmb Booster 50. Polini code: 200.0331 The Polini Original 2 muffler was designed to maintain the most original series appearance possible and is approved for the MBK Booster 50cc scooter, but can be adapted to all vertical Minarelli engines. However, beneath the surface, the heart of a racing soul beats, as it was designed to...
Reference: 4142.03.13-01
Brand: Domino
Yamaha R1 RBW Domino electronic throttle control. Domino Code: 4142.03.13-01 RBW electronic throttle control for Yamaha R1 (from 2020). Specific for Track / Racing use. Black colour Knob compatibility: 125 mm Max Travel: 65 ° End of gas pipe: Open Finish: Anodized Handlebar mounting: Two M5 screws Material: Aluminum Weight: 198 gr
Reference: 204.0284
Brand: POLINI
Yamaha piston Chappy 50cc 45.4mm 204.0284
Reference: 119.0055
Brand: POLINI
Polini cylinder kit diameter 46 mm in cast iron for Honda Wallaroo and Peugeot Fox 50 cc. Polini Code: 119.0055. Polini cylinder kit for: Honda, Honda Wallaroo 50, Peugeot, Peugeot Fox 50.
Reference: 1113004
Brand: Malossi
Complete Malossi gasket kit for 39.88 diameter cylinder kit (multi-thickness) (for Derbi engines) Malossi code: 1113004
Reference: 5518744
Brand: Malossi
Malossi traction free electronic control unit 5518744 for Yamaha Code: 5518744 Malossi Traction Free is a special device dedicated to Yamaha TMax 530 and 560 cc maxiscooters designed to inhibit the traction control and/or the vehicle speed limiter. The device has been designed to ensure that all the processing stages proposed by Malossi for this...
Reference: 3214818.k0
Brand: Malossi
Malossi RX exhaust approved with catalyst for Piaggio Carnaby Malossi code: 3214818.k0 Malossi exhaust for Piaggio Carnaby 300 ie 4T LC euro 3 (Quasar) type: M60 var. 4 ver. 00. The "type" only specifies for which model the approval is valid, it does not limit its assembly.
Reference: 204.0937/D
Brand: POLINI
Polini piston diameter 47.6 mm, selection D (47.575 mm) 204.0937/D Polini piston diameter 47.6 mm, for Yamaha, pin 10 mm for crossbar cylinder selection D (47.575 mm) Polini piston for: Aprilia, Aprilia Area 51, Aprilia Gulliver 50, Aprilia Rally 50, Aprilia Sonic 50, Aprilia Sr 50, Benelli, Benelli 491 50, Benelli K2 50, Beta, Beta Ark 50, Beta Eikon 50,...
Reference: 6215802
Brand: Malossi
Malossi brake shoe Malossi code: 6215802 Malossi brake shoe for Aprilia Amico 50 2T rear. Malossi brake shoe for Aprilia Gulliver 50 2T rear. Malossi brake shoe for Aprilia Gulliver 50 2T LC rear. Malossi brake shoe for Aprilia Rally 50 2T (Minarelli) rear. Malossi brake shoe for Aprilia Scarabeo 50 2T (Minarelli) rear. Malossi brake shoe for Aprilia...
Reference: 176.1241/R
Brand: POLINI
Original Polini racing brake shoes (with springs) d.80x18 mm Code: 176.1241/R Original Polini racing brake shoes (with springs) for Honda Camino 50. Original Polini racing brake shoes (with springs) for Honda PX 50. Original Polini racing brake shoes (with springs) for Motobecane 51. Original Polini racing brake shoes (with springs) for Motobecane 92GT....
Reference: 143.765.010
Brand: POLINI
Complete front AJP brake system for Polini GP5 minimoto. Original Polini spare – code 143.765.010.
Reference: 215.0406
Brand: POLINI
Piaggio Zip intake manifold for original carburettor. Polini Code: 215.0406
Minimoto water tank vent fitting.
Tank vent measurements:
Total length: 22 mm.
Thread length: 6 mm.
Pipe connection length: 12 mm.
Nut length: 4 mm.
Thread diameter: 6 mm.
Pipe connection diameter: 5.5 mm.
Internal diameter: 3.5 mm.