- Reduced price
- New
Xmotorstore Payments
Malossi RS3 front shock absorber for Vespa 4614616
Malossi code: 4614616
Malossi front Rs3 shock absorber, wheelbase 195 mm.
RS3 SPORT HYDRAULIC SHOCK ABSORBERS
Each shock absorber has been designed for a specific scooter or moped, both dimensionally and in terms of its functioning.
The peculiarities that distinguish this shock absorber are:
-The excellent functionality
-Great durability over time thanks to the high quality of the materials used
-Very low friction coefficient
Technical features
-Type: oil-pneumatic shock absorber
-Use: road
-12 mm shock absorber rod in hardened and tempered C43 steel
-Piston in steel and sintered bronze
-New Swedish steel lamellar system
-Piston guide shoe of the LUBRIFLON-PTFE B70 type (bronze filled modified compound)
- Sliding on DU GUIDE bush (compound obtained by sintering a layer of spheroidal bronze on a suitably pressed mild steel strip and with subsequent impregnation and coating with a mixture of PTFE+FB)
- Scraper ring in SEALTHANE grade 9345 polyester resin
-Micrometric adjustment of spring pre-load via ring nuts
-Special oil with low viscosity and practically insensitive to temperature variations.
Malossi shock absorber for:
Malossi shock absorber for Vespa ET3 Primavera 125 2T.
Malossi shock absorber for Vespa Primavera 125 2T.
Malossi shock absorber for Vespa Special 50.
Reference: GHR 020.001
Brand: GHR
Pair of oil seals for minimoto GHR engines. Pair of oil seals for minimoto high smoothness engines GHR, for minimoto engines. The minimoto GHR oil seals are compatible with BZM, CS, IAME, POLINI engines and others. Oil seal measurements: 15x24x5 mm.
Reference: 5114258
Brand: Malossi
Malossi Multivar 2000 variator 5114258 Code: 5114258 Multivar 2000 When technology makes the difference. Multivar: the sports change with burning acceleration that does not give space! A jewel to be set in your scooter. Too bad that it cannot be exhibited, it is so perfect! Designed by highly experienced engineers, produced in full in the Malossi...
Reference: A2155
Brand: Alfano
Alfano candle temperature sensor 14 mm A2155. This K thermocouple sensor needs to be installed with a 14mm diameter plug cable length 40cm. Caution: It is important to remove the sealing washer from the spark plug before installation. Note: This sensor must be used with an A3401 extension cable or A2190 hub.
Reference: 7714313
Brand: Malossi
Malossi Wing finned clutch bell 7714313 for Yamaha and Minarelli engines Malossi code: 7714313. Malossi Wing finned clutch bell for Yamaha and Minarelli engines Internal diameter 107 mm. Weight 479 grams. Technical specifications: -Seamless forged bell in hardened and nitrided 39NiCrMo5 steel with antioxidant surfaces. -Anti-explosion reinforcement crown,...
Reference: EK 575G
Brand: PBR
Transmission kit for Honda Hornet / s (cb-f) from 1997 to 2006 The kit includes CHAIN - CROWN - PINION - GREASE CHAIN The kit is available optionally with pinion from 14 to 16 and crown from 38 to 48.
Reference: 050.2122
Brand: POLINI
Polini engine support swing arm for Piaggio Zip, for h2o version. Polini code: 050.2122 Spare part for Polini Evolution P.R.E. engine Application: PIAGGIO ZIP 50 2T SP H2O from 2001 - ZIP 50 2T SP H2O from 1996 to 2000.
Reference: Slider-caviglia-falco
Brand: Falco
Ankle slider for Falco shoes. PVC ankle and malleolus slider for Falco 770 and 771 shoes (pair). Available: Red ankle slider for Falco shoes. Blue ankle slider for Falco shoes. Black ankle slider for Falco shoes.
Reference: 143.630.029
Brand: POLINI
Front wheel pin for Polini 910 RS minimoto with 5-pollen rims. Polini Code: 143.630.029
Reference: 03.MA.0016.L
Brand: Ohvale
Throttle cable for Ohvale Gp-2 with Keihin carburettor and Gp.0 evo 110 cc with Dellorto carburettor. Ohvale code: 03.MA.0016.L
Reference: 404616
Brand: T4TUNE
Right rear indicator Vespa LX 50 125 Code: 404616 Ean: 9900000049201
Reference: 248.138
Brand: POLINI
Polini belt for Honda PCX 125 ie Euro 5 from 2021. Polini code: 248.138 The Polini Original belt is specifically designed for Honda PCX 125 E5, it ensures a quicker acceleration and a greater extension, without compromising reliability. Made with high quality materials, the Polini original belt guarantees optimal performance and a long life with an always...
Reference: R01.CA.0034.G
Brand: Ohvale
Ohvale EVO Cover tank fairing unpainted Code: R01.CA.0034.G
Reference: 200.2054
Brand: POLINI
Polini muffler for Vespa 125 cc 2t PK 200.2054. For models with battery, the use of the bracket code 214.0138 is recommended, which allows you to keep the support in a higher position. Polini's commitment to the timeless Vespa continues with the launch of the brand new Original muffler. Created with the aim of improving performance and at the same time...
Reference: MC21
Brand: HJC
Hjc i91 Bina helmet In the new Hjc i91 helmet we can find: -double approval (P/J) -Advanced composite polycarbonate shell with adjustment Adjustable polycarbonate chin guard: Lightweight, with superior fit and comfort thanks to advanced CAD technology. -Pinlock Ready HJ-33 VISOR: Offers 99% UV protection, anti-scratch coating. -Multi-Step dynamic sun...
Reference: 1022
Brand: STAMAS
Screw kit for fixing seat post and swingarm on Stamas frame
Malossi RS3 front shock absorber for Vespa 4614616
Malossi code: 4614616
Malossi front Rs3 shock absorber, wheelbase 195 mm.
RS3 SPORT HYDRAULIC SHOCK ABSORBERS
Each shock absorber has been designed for a specific scooter or moped, both dimensionally and in terms of its functioning.
The peculiarities that distinguish this shock absorber are:
-The excellent functionality
-Great durability over time thanks to the high quality of the materials used
-Very low friction coefficient
Technical features
-Type: oil-pneumatic shock absorber
-Use: road
-12 mm shock absorber rod in hardened and tempered C43 steel
-Piston in steel and sintered bronze
-New Swedish steel lamellar system
-Piston guide shoe of the LUBRIFLON-PTFE B70 type (bronze filled modified compound)
- Sliding on DU GUIDE bush (compound obtained by sintering a layer of spheroidal bronze on a suitably pressed mild steel strip and with subsequent impregnation and coating with a mixture of PTFE+FB)
- Scraper ring in SEALTHANE grade 9345 polyester resin
-Micrometric adjustment of spring pre-load via ring nuts
-Special oil with low viscosity and practically insensitive to temperature variations.