- Reduced price
- New

Xmotorstore Payments
Malossi Wing finned clutch bell 7714313 for Yamaha and Minarelli engines
Malossi code: 7714313.
Malossi Wing finned clutch bell for Yamaha and Minarelli engines
Internal diameter 107 mm.
Weight 479 grams.
Technical specifications:
-Seamless forged bell in hardened and nitrided 39NiCrMo5 steel with antioxidant surfaces.
-Anti-explosion reinforcement crown, finned to dissipate heat to protect the friction material, tested at over 20,000 RPM.
-Contact surface with relief holes sized and arranged so as to obtain permanent grinding of the friction material.
-Original architecture with openings designed to create a dynamic ventilation effect capable of offering the possibility of intervening within the system to vary the clutch calibration.
-Very high finishing degrees with very tight tolerances.
Work surface values:
-Roughness RA
-Eccentricity: mm. 0.002
-Roundness: mm. 0.003
-Balances: gr. 0.005
Malossi clutch bell for:
Malossi clutch bell for Aprilia Amico 50 2T.
Malossi clutch bell for Aprilia Area 51 50 2T LC.
Malossi clutch bell for Aprilia Gulliver 50 2T LC.
Malossi clutch bell for Aprilia Gulliver 50 2T.
Malossi clutch bell for Aprilia Rally 50 2T (Minarelli).
Malossi clutch bell for Aprilia SR Netscaper 50 2T LC (Minarelli).
Malossi clutch bell for Aprilia Rally 50 2T LC (Minarelli).
Malossi clutch bell for Aprilia Scarabeo 50 2T (Minarelli).
Malossi clutch bell for Aprilia SR Racing 50 2T LC (Minarelli).
Malossi clutch bell for Aprilia Sonic 50 2T.
Malossi clutch bell for Aprilia Sonic 50 2T LC.
Malossi clutch bell for Aprilia SR Stealth 50 2T LC (Minarelli).
Malossi clutch bell for Aprilia SR WWW 50 2T.
Malossi clutch bell for Benelli 491 Sport 50 2T LC (Minarelli).
Malossi clutch bell for Beta Ark 50 2T.
Malossi clutch bell for Beta Ark 50 2T LC.
Malossi clutch bell for Beta Chrono 50 2T.
Malossi clutch bell for Beta Eikon 50 2T LC.
Malossi clutch bell for Benelli 491 GT 50 2T (Minarelli).
Malossi clutch bell for Benelli K2 50 2T.
Malossi clutch bell for Benelli K2 50 2T LC.
Malossi clutch bell for Benelli Naked 50 2T.
Malossi clutch bell for Benelli Pepe 50 2T.
Malossi clutch bell for Beta Quadra 50 2T.
Malossi clutch bell for BSV AX 50.
Malossi clutch bell for BSV GZ 50.
Malossi clutch bell for Fantic Big Wheel 50 2T.
Malossi clutch bell for Italjet Dragster 50 2T LC.
Malossi clutch bell for Malaguti F10 50 2T.
Malossi clutch bell for Malaguti F12-Phantom 50 2T.
Malossi clutch bell for Malaguti Centro 50 2T.
Malossi clutch bell for Malaguti Ciak 50 2T.
Malossi clutch bell for Malaguti F15 Firefox 50 2T LC.
Malossi clutch bell for Malaguti F12 Digit Kat-Phantom 50 2T LC.
Malossi clutch bell for Malaguti F12 Digit Kat-Phantom 50 2T LC euro 2.
Malossi clutch bell for Malaguti F12-Phantom 50 2T LC.
Malossi clutch bell for Malaguti F12 R LC 50 2T LC euro 2.
Malossi clutch bell for Malaguti Yesterday 50 2T.
Malossi clutch bell for MBK Booster 50 2T euro 0-1 (ATTENTION: to fit the Malossi bell it is necessary to remove the excess material inside the crankcase).
Malossi clutch bell for MBK Booster 50 2T euro 2 (A137E) (ATTENTION: to fit the Malossi bell it is necessary to remove the excess material inside the crankcase).
Malossi clutch bell for MBK Booster Spirit 50 2T euro 0-1 (ATTENTION: to fit the Malossi bell it is necessary to remove the excess material inside the crankcase).
Malossi clutch bell for MBK Booster X 50 ie 4T LC euro 2.
Malossi clutch bell for MBK Flipper 50 2T.
Malossi clutch bell for MBK Forte 50 2T.
Malossi clutch bell for MBK Hot Champ 50 2T.
Malossi clutch bell for MBK Mach G 50 2T.
Malossi clutch bell for MBK Mach G 50 2T LC.
Malossi clutch bell for MBK Booster Naked 50 2T euro 2 (A137E) (ATTENTION: to fit the Malossi bell it is necessary to remove the excess material inside the crankcase).
Malossi clutch bell for MBK Nitro 50 2T LC.
Malossi clutch bell for MBK Nitro 50 ie 4T LC euro 2.
Malossi clutch bell for MBK Booster NG 50 2T euro 0-1 (ATTENTION: to fit the Malossi bell it is necessary to remove the excess material inside the crankcase).
Malossi clutch bell for MBK Booster NG 50 2T euro 2 (A137E) (ATTENTION: to fit the Malossi bell it is necessary to remove the excess material inside the crankcase).
Malossi clutch bell for MBK Ovetto 50 2T.
Malossi clutch bell for MBK Ovetto UBS 50 ie 4T LC euro 2.
Malossi clutch bell for MBK Booster Rocket 50 2T euro 0-1 (ATTENTION: to fit the Malossi bell it is necessary to remove the excess material inside the crankcase).
Malossi clutch bell for MBK Booster Rocket 50 2T euro 2 (A137E) (ATTENTION: to fit the Malossi bell it is necessary to remove the excess material inside the crankcase).
Malossi clutch bell for MBK Sorriso 50 2T 1996->.
Malossi clutch bell for MBK Stunt 50 2T euro 0-1 (ATTENTION: to fit the Malossi bell it is necessary to remove the excess material inside the crankcase).
Malossi clutch bell for MBK Stunt 50 2T euro 2 (ATTENTION: to fit the Malossi bell it is necessary to remove the excess material inside the crankcase).
Malossi clutch bell for Yamaha Aerox 50 2T LC euro 0-1.
Malossi clutch bell for Yamaha Aerox 50 2T LC euro 2.
Malossi clutch bell for Yamaha Aerox 4 50 ie 4T LC euro 4 2018-> (A333E).
Malossi clutch bell for Yamaha Aerox 4 50 ie 4T LC euro 2 (A326E).
Malossi clutch bell for Yamaha BW's 50 2T euro 0-1 (ATTENTION: to fit the Malossi bell it is necessary to remove the excess material inside the crankcase).
Malossi clutch bell for Yamaha BW's 50 2T euro 2 (A137E) (ATTENTION: to fit the Malossi bell it is necessary to remove the excess material inside the crankcase).
Malossi clutch bell for Yamaha BW's Original/Naked 50 2T euro 2 2010-> (A137E) (ATTENTION: to fit the Malossi bell it is necessary to remove the excess material inside the crankcase).
Malossi clutch bell for Yamaha BW's NG 50 2T euro 0-1 (ATTENTION: to mount the Malossi bell it is necessary to remove the excess material inside the crankcase).
Malossi clutch bell for Yamaha BW's NG 50 2T euro 2 (A137E) (ATTENTION: to fit the Malossi bell it is necessary to remove the excess material inside the crankcase).
Malossi clutch bell for Yamaha C3 [XF] 50 ie 4T LC euro 2 (A311E).
Malossi clutch bell for Yamaha Jog ER 50 2T.
Malossi clutch bell for Yamaha Giggle [XF] 50 ie 4T LC euro 2 (A311E).
Malossi clutch bell for Yamaha Jog 50 2T.
Malossi clutch bell for Yamaha Jog R 50 2T.
Malossi clutch bell for Yamaha JogRR 50 2T LC euro 2.
Malossi clutch bell for Yamaha Jog Z 50 2T.
Malossi clutch bell for Yamaha Neo's 50 2T.
Malossi clutch bell for Yamaha Neo's 4 50 ie 4T LC euro 2 (A316E).
Malossi clutch bell for Yamaha Neo's 4 50 ie 4T LC euro 4 2019->.
Malossi clutch bell for Yamaha Slider 50 2T. ATTENTION: to assemble the Malossi bell it is necessary to remove the excess material inside the casing.
Malossi clutch bell for Yamaha Spy 50 2T.
Malossi clutch bell for Yamaha Vino 50 2T.
Malossi clutch bell for Yamaha Vox [XF] 50 ie 4T LC euro 2 (A311E).
Malossi clutch bell for Yamaha Why 50 2T.
Malossi clutch bell for Yamaha Zuma 50 2T. ATTENTION: to assemble the Malossi bell it is necessary to remove the excess material inside the casing.
Malossi clutch bell for Yamaha Zuma FX 50 ie 4T LC.
Reference: MS12014-S00+MS12024-S00
Brand: PMT TYRES
Ohvale Pmt S 12 inch tires. The pair of Pmt tires for Ohvale GP2 is made up of: 100/90 front tire and 120/80 rear tire in soft compound. Codes: MS12014-S00 and MS12024-S00. Pmt tires branded Ohvale GP2 tires are the most used and performing on the market, recommended for racing use.
Reference: 01.CA.0047.L
Brand: Ohvale
Ohvale body screws kit. Ohvale code: 01.CA.0047.L Compatible kit for: Ohvale Gp-0 bodywork screws kit. Ohvale Gp-2 bodywork screws kit.
Reference: 6215011BS
Brand: Malossi
Malossi MHR Synt approved brake pads Malossi code: 6215011BS Malossi brake pads for APRILIA MX 50 2T LC (MINARELLI AM 6) Front APPROVED Malossi brake pads for APRILIA RS 50 2T LC (MINARELLI AM 3 to 6) Front - for vehicles MADE 2001 - APPROVED Malossi brake pads for APRILIA TUONO 50 2T LC (MINARELLI AM 6) Front APPROVED Malossi brake pads for BENELLI...
Reference: 144.015.007
Brand: POLINI
Polini 2-valve 110 Xp4t engine head complete Polini motor head for: Polini, Polini XP4T 110
Reference: 11 7572B
Brand: Malossi
Complete Malossi gasket kit for 47 diameter cylinder kit for Cagiva City 50 cc Malossi code: 11 7572B
Reference: 928.830.021
Brand: POLINI
Polini digital tachometer plus hour meter without thermocouple, for 2 and 4 stroke engines. Compatible with all vehicles. Illustrative photo, the product may differ from the image. Polini code: 928.830.021 Polini digital tachometer plus hour meter without thermocouple for Thor Engine spare parts
Reference: 248.077
Brand: POLINI
Polini variator belt for Yamaha X Max 250 Aramid Code: 248.077 Application: Yamaha, Yamaha Versity 300, Yamaha X City 250, Yamaha X Max 250 / 250i, Mbk, Mbk Skycruiser 250, Mbk Evolis 250 4T ie
Reference: 209.0453
Brand: POLINI
Set of gaskets Peugeot Ludix carburettor version 209.0453
Reference: 241.667
Brand: POLINI
Polini Variator for Hi speed Kymco People X Citing 300 Code: 241.667 Variator supplied with a series of rollers 23x18 gr. 14.8 Application: Kymco, Kymco Kxr 250, Kymco Mxu 250, Kymco X Citing 300 i 2V, Kymco People 300 S i, Kymco Maxxer 300, Kymco X-Town 300 i 4V, Daelim, Daelim S3 Advance 250 4T
Reference: 6714733
Brand: Malossi
Primary gear assembly with third support z 14 / 42 Malossi 6714733 Malossi code: 6714733 The high number of revolutions to which the driven pulley group is subjected generates very strong vibrations and oscillations of the primary shaft. To overcome this problem, the primary gear shaft has been lengthened so that it can be housed on a bearing located on...
Reference: 267209922
Brand: Wrapper
Fluorescent fuchsia paint can. Removable paint can Fluo fuchsia wrapper 400 ml. Spray can wrap, perfect for rims and tuning. How does the wrapping paint work? It is applied like a normal varnish, once dry it will become like a wrapping film, with the possibility of removing it at any time. CODE: 267209922 EAN: 5907547716928 SUPPLIER CODE: 400WRAPPER2711
Reference: 209.0424
Brand: POLINI
Polini 250 4T gasket series 209.0424 Code: 209.0424 Polini gaskets set for Yamaha Majesty 250 4T Polini gaskets set for: Aprilia, Aprilia Leonardo 250, Benelli, Benelli Velvet 250, Malaguti, Malaguti Madison 250, Mbk, Mbk Skyliner 250, Polini, Yamaha, Yamaha Majesty 250
Reference: 4613162
Brand: Malossi
Pair of Malossi Twins rear shock absorbers 4613162 Malossi code: 4613162 Pair of Malossi Twins rear shock absorbers 305 mm wheelbase Technical features: -Type: oil-pneumatic shock absorber -Road use -12 mm shock absorber rod in hardened and tempered C43 steel -Piston in steel and sintered bronze -New Swedish steel lamellar system -Piston guide shoe of the...
Reference: 1707.02.2151
Brand: Domino
Domino cable regulator m8x1. Domino code: 1707.02.2151 Throttle and clutch cable adjustment, generic, for Domino and others, pitch 8x1 m. Material: Aluminium. Finish: Oxidized. Color: Shiny Silver. Thread: M8 x 1mm. Sheath seat diameter: 8.15 mm. Sheath seat depth: 8.5 mm. For lever portal commands: code 1707.04 code 1907.04
Reference: 5519633
Brand: Malossi
Malossi ignition with internal rotor Mhr Team II Malossi Code: 5519633 Malossi ignition for Drr Drx 90 2016 The MHR Team II range is equipped with a non-remappable variable advance control unit with 3 trimmers: -the first (MAPS) to determine the advance map selection - the second (OFFSET) allows you to move the selected map + or - 2 ° - the third (LIM)...
Reference: 001002R002B0
Brand: DM
Conical spacer on the crown side DM, the spacer must be inserted between the swingarm and the wheel bearing with the diameter of the narrowest cone towards the bearing. The wheel spacer Dm has the following measures: Hole diameter 10 mm Outside diameter 24 mm Outside diameter narrow part 15 mm Spacer thickness 10 mm Dm code: 001002R002B0
Malossi Wing finned clutch bell 7714313 for Yamaha and Minarelli engines
Malossi code: 7714313.
Malossi Wing finned clutch bell for Yamaha and Minarelli engines
Internal diameter 107 mm.
Weight 479 grams.
Technical specifications:
-Seamless forged bell in hardened and nitrided 39NiCrMo5 steel with antioxidant surfaces.
-Anti-explosion reinforcement crown, finned to dissipate heat to protect the friction material, tested at over 20,000 RPM.
-Contact surface with relief holes sized and arranged so as to obtain permanent grinding of the friction material.
-Original architecture with openings designed to create a dynamic ventilation effect capable of offering the possibility of intervening within the system to vary the clutch calibration.
-Very high finishing degrees with very tight tolerances.
Work surface values:
-Roughness RA
-Eccentricity: mm. 0.002
-Roundness: mm. 0.003
-Balances: gr. 0.005