Xmotorstore Payments
Formula 4 piston FM6001-PTB front braking system.
The best front braking system for Pitbike, MiniGP, and minicross.
The new Formula pump uses an innovative (patented) reverse piston. A longer life of the seals, combined with an increase in performance, bring the new front brake system for pitbikes and miniGPs a step forward compared to other traditional pumps on the market.
Developed together with professional MotoCross and Pitbike riders, it becomes a new point of reference for its sector.
TECHNICAL FEATURES:
Front Pump:
SLC machined pump body
Hard anodized piston of Ø 9.75 mm
Porthole for checking the oil level
Forged lever with integrated TFRA
Front Caliper:
SLC machined monolithic caliper body
Radial attachment
4 pistons of Ø 24 mm.
Center distance 84 mm.
Tube length: 105 cm.
ATTENTION: FOR FITTING ON OHVALE GP-0 THE PIPE IS LONGER THAN THE DEDICATED OHVALE SYSTEM (OHVALE CODE: 01.IF.0001.L), IT MAY BE NECESSARY TO REPLACE THE BRAKE PIPE.
Formula 4 piston FM6001-PTB front braking system.
The best front braking system for Pitbike, MiniGP, and minicross.
The new Formula pump uses an innovative (patented) reverse piston. A longer life of the seals, combined with an increase in performance, bring the new front brake system for pitbikes and miniGPs a step forward compared to other traditional pumps on the market.
Developed together with professional MotoCross and Pitbike riders, it becomes a new point of reference for its sector.
TECHNICAL FEATURES:
Front Pump:
SLC machined pump body
Hard anodized piston of Ø 9.75 mm
Porthole for checking the oil level
Forged lever with integrated TFRA
Front Caliper:
SLC machined monolithic caliper body
Radial attachment
4 pistons of Ø 24 mm.
Center distance 84 mm.
Tube length: 105 cm.
ATTENTION: FOR FITTING ON OHVALE GP-0 THE PIPE IS LONGER THAN THE DEDICATED OHVALE SYSTEM (OHVALE CODE: 01.IF.0001.L), IT MAY BE NECESSARY TO REPLACE THE BRAKE PIPE.
Reference: 1112978
Brand: Malossi
Complete Malossi gasket kit for 39.88 diameter cylinder kit (for Derbi D50B0 / 1 engines) Malossi code: 1112978
Reference: TCM6035-2
Brand: Tecnominimoto
50cc air-cooled cylinder kit 5 transfers for Polini. The TCM cylinder for Polini minimoto engine allows you to bring the displacement from 40cc to 50cc, cylinder compatible with Polini engine crankcase.
Reference: 210.0081
Brand: POLINI
Polini For Race Crankshaft for Minarelli AM6 210.0081 Polini For Race crankshaft for Minarelli AM6 engines, designed for maximum performance on 50cc enduro and motard bikes. Full rings, 39 mm stroke, forged connecting rod, and C4 bearings included.
Reference: 5519172B
Brand: Malossi
Lambda O2 Malossi controller 5519172B emulator Code: 5519172B The use of the new O2 controller allows the management of the carburetion in the area where the Lambda probe controls the title of the fuel-air mixture to be introduced into the combustion chamber. This device is able to make the lambda probe work at a different value from the stoichiometric...
Reference: 3116423
Brand: Malossi
Malossi cylinder diameter 47.6 aluminum H2O FLANGED MOUNT for detachable head Malossi code: 3116423
Reference: 2520191
Brand: Malossi
Malossi rear end cap 2520191 Malossi code: 2520191 Malossi rear end cap in aluminum for silencer with 70 mm diameter 2520191.
Reference: Graphics-kit-grc-rrz3-redbull
Brand: XRACING
Sticker graphics for Grc rrz3 Redbull. Adhesive graphics for Grc minimoto model Rrz3, very simple to apply as it is already adhesive in every point, it protects the paint from superficial scratches and wear. Possibility of modifications on request of the pilot number. The waiting time may vary depending on the modification requested.
Reference: 7715898B
Brand: Malossi
Malossi Maxi wing finned clutch bell 7715898B Malossi code: 7715898B. Maxi wing finned clutch bell internal diameter 134 mm Weight 1138 grams. The anti-explosion thermal clutch bells are equipped with a finned reinforcement ring for the dissipation of heat which develops mainly during starts from a standstill and when the vehicle accelerates from low...
Reference: 203.0066
Brand: POLINI
Polini air box in metal inclined 90 degrees. Available in the variants: 203.0066 filter for Phva, measures: 34x105x61 203.0067 filter for Phbl, measures: 38x120x71
Reference: 01.SB.0212.L
Brand: Ohvale
Ohvale Washer 8.5 X 1.5 X 14 Code: 01.SB.0212.L
Reference: 204.0010
Brand: POLINI
Vespa 125cc piston 57 mm. Polini code: 204.0010
Reference: 02 6126
Brand: Malossi
Malossi inclined intake manifold 15x19 mm 02 6126 Code: 02 6126 Malossi inclined intake manifold
Reference: 211.0318
Brand: POLINI
Piaggio H2O head diameter 52 mm stroke 39.3. Polini Code: 211.0318 Polini cylinder head for: Aprilia, Aprilia SR 50, Derbi, Derbi Gp1 50, Gilera, Gilera Dna 50, Gilera Runner 50, Piaggio, Piaggio Extrem Lc, Piaggio Nrg Mc3, Piaggio Nrg, Piaggio Ntt, Piaggio Quartz, Piaggio Zip 50, Polini
Reference: 03.MA.0052.L
Brand: Ohvale
Left half-handlebar bracelet M10 black for Ohvale Gp-2 and Gp-0 EVO. Ohvale code: 03.MA.0052.L New left bracelet for Ohvale 2025 half-handlebars, in black, with M10 pitch. Application: Left half-handlebar bracelet M10 black for Ohvale Gp-2. Left half-handlebar bracelet M10 black for Ohvale Gp-0 EVO. ATTENTION: The black half-handlebar bracelets are not...
Reference: 204.0120
Brand: POLINI
Vespa 50cc piston 38.4 mm. Polini Code: 204.0120
Formula 4 piston FM6001-PTB front braking system.
The best front braking system for Pitbike, MiniGP, and minicross.
The new Formula pump uses an innovative (patented) reverse piston. A longer life of the seals, combined with an increase in performance, bring the new front brake system for pitbikes and miniGPs a step forward compared to other traditional pumps on the market.
Developed together with professional MotoCross and Pitbike riders, it becomes a new point of reference for its sector.
TECHNICAL FEATURES:
Front Pump:
SLC machined pump body
Hard anodized piston of Ø 9.75 mm
Porthole for checking the oil level
Forged lever with integrated TFRA
Front Caliper:
SLC machined monolithic caliper body
Radial attachment
4 pistons of Ø 24 mm.
Center distance 84 mm.
Tube length: 105 cm.
ATTENTION: FOR FITTING ON OHVALE GP-0 THE PIPE IS LONGER THAN THE DEDICATED OHVALE SYSTEM (OHVALE CODE: 01.IF.0001.L), IT MAY BE NECESSARY TO REPLACE THE BRAKE PIPE.
