Xmotorstore Payments
Polini For Race Crankshaft for Minarelli AM6 210.0081
Polini For Race crankshaft for Minarelli AM6 engines, designed for maximum performance on 50cc enduro and motard bikes.
Full rings, 39 mm stroke, forged connecting rod, and C4 bearings included.
The Polini For Race Crankshaft 210.0081 is designed to bring the Minarelli AM6 engine to the highest performance level.
Built for 50cc enduro and supermoto bikes, this racing crankshaft delivers exceptional durability, balance, and smooth power delivery.
Featuring full-mass crank webs and a 39 mm stroke, it improves carburation efficiency and engine inertia, providing sharper throttle response and consistent torque.
The forged connecting rod ensures extreme strength under racing conditions, while the precision dynamic balancing minimizes vibrations, guaranteeing smoother operation.
Included are two high-speed C4 bearings, with the flywheel-side bearing upgraded to a 20 mm inner diameter — a technical improvement for better reliability in extreme use.
Technical Features:
Racing full-mass crankshaft
Stroke: 39 mm
Forged connecting rod
Dynamic balancing for reduced vibration
2x C4 high-speed bearings included
Upgraded flywheel-side bearing (Ø 20 mm)
100% Made in Italy by Polini
Part number: 210.0081
Compatibility (Minarelli AM6 engine):
Fits all 50cc models equipped with Minarelli AM6 engines, including:
Aprilia, Beta, Fantic, HM, Malaguti, MBK, Peugeot, Rieju, Sherco, Yamaha, CPI, Vent.
Reference: 133.1008
Brand: POLINI
Polini cylinder kit for Minarelli Am6 diameter 50 mm h2o. Polini Code: 133.1008
Reference: 133.1009
Brand: POLINI
Polini thermal group kit for Minarelli Am6 diameter 50 mm. Polini Code: 133.1009
Reference: 133.1011
Brand: POLINI
Polini thermal group kit for Minarelli Am6 diameter 40.3 mm 133.1011
Reference: 215.0427
Brand: POLINI
Intake manifold Minarelli AM6 Derbi diameter 21 360 degrees. Polini Code: 215.0427 Inlet size 24.5 mm. For carburetor 21 Dellorto. APRILIA : AF1 50 MINARELLI AM6 - MX 50 Minarelli AM6 - RS 50 dal 2006 -> (DERBI D50B) - RS 50 MINARELLI AM6 - RS4 50 (DERBI D50B) - RX 50 MINARELLI AM6 - RX-SX 50 dal 2006-> (DERBI D50B) - TUONO 50 Minarelli AM6 BETA :...
Reference: 215.0439
Brand: POLINI
Intake manifold Minarelli AM6 Derbi for carburetors 23-24 rotatable 360 degrees. Manifold compatible with: APRILIA: AF1 50 MINARELLI AM6 - MX 50 Minarelli AM6 - RS 50 from 2006 -> (DERBI D50B) - RS 50 MINARELLI AM6 - RS4 50 (DERBI D50B) - RX 50 MINARELLI AM6 - RX-SX 50 from 2006-> (DERBI D50B) - TUONO 50 Minarelli AM6 BETA: RR 50 AM6 (1999-2002) -...
Reference: 215.0428
Brand: POLINI
Intake manifold Minarelli AM6-DERBI diameter 30 Dellorto 360 °. Polini Code: 215.0428 APRILIA : AF1 50 MINARELLI AM6 - MX 50 Minarelli AM6 - RS 50 dal 2006 -> (DERBI D50B) - RS 50 MINARELLI AM6 - RS4 50 (DERBI D50B) - RX 50 MINARELLI AM6 - RX-SX 50 dal 2006-> (DERBI D50B) - TUONO 50 Minarelli AM6 BETA : RR 50 AM6 (1999-2002) - RR 50 ENDURO, MOTARD...
Reference: 171.0623
Brand: POLINI
Polini ignition stator for Minarelli Am6- Derbi Code: 171.0623 Polini ignition stator for Aprilia Polini ignition stator for Aprilia MX 50 Polini ignition stator for Aprilia RX 50 Polini ignition stator for Aprilia Tuono 50 Polini ignition stator for Beta Polini ignition stator for Beta RR 50 Polini ignition stator for Bultaco Polini ignition...
Reference: 206.0360
Brand: POLINI
Polini segment diameter 57x1.5 mm s10 206.0360 Polini segment for: Vespa, Vespa 125
Reference: 209.0350
Brand: POLINI
Polini gaskets series diameter 46 mm 209.0350 Polini gaskets series for: Piaggio, Piaggio Bravo, Piaggio Cba, Piaggio Ciao, Piaggio Eco, Piaggio Si, Polini, Gilera, Gilera Cba Code: 209.0350
Reference: 060027
Brand: T4TUNE
DAGGER CARBON approved motorcycle indicators with led Code: 060027 Ean: 9900000001032
Reference: 01.SD.0403.L
Brand: Ohvale
Ohvale Bolt hexagon flange M6x70 Code: 01.SD.0403.L
Reference: 143.075.009
Brand: POLINI
Starter casing minimoto Polini reverse 143.075.009
Reference: 01.MA.0032.L
Brand: Ohvale
Ohvale Gp-0 Evo 110 4S clutch cable. Ohvale code: 01.MA.0032.L
Reference: 1313799b
Brand: Malossi
Malossi MHR FKM sleeve for Dell'Orto carburetors diameter 28 - 30 Malossi code: 1313799b Malossi sleeve for APRILIA SR (carb.) 50 2T LC 2004- (PIAGGIO) only for MHR C-one crankcase. Malossi sleeve for APRILIA SR R (carb.) 50 2T LC (PIAGGIO) only for MHR C-one crankcase. Malossi sleeve for APRILIA SR R 50 2T LC euro 4 2018- (PIAGGIO CA81M) only for MHR...
Reference: 274504
Brand: C4
Complete intake kit with 23 mm carburetor connection for Peugeot, the kit includes the reed valve pack, gaskets, screws for assembly.
Reference: 174.0027
Brand: POLINI
Original Polini brake pads 36.5x93.9x7.6 mm Code 174.0027 These pads are applicable as: Brake pads Aprilia RX 125 R, Brake pads Aprilia SRV 850 ie 4T, Brake pads Gilera Nexus 500, Brake pads Gilera Nexus 500 from 2005, Brake pads Gilera GP 800, Brake pads Mbk Kilibre 300, Brake pads Mbk Skyliner 125 Carburetor, Brake pads Mbk Skyliner 150 Carburetor,...
Reference: 174.2140
Brand: POLINI
Kymco X Citing sintered brake pads Code: 174.2140 Application: Kymco, Kymco X Citing 500 / 500i / 400 i / 400 i Euro 4
Reference: 6711449
Brand: Malossi
Malossi HTQ primary gears z 16 / 37 6711449 Malossi code: 6711449. The new HTQ gears have been designed and manufactured with straight/helical teeth to minimize friction losses and stress on the supports. Furthermore, our gears optimize the ratio allowing you to exploit all the power delivered by your vehicle, guaranteeing you a considerable extension...
Reference: 01.SD.0707.L
Brand: Ohvale
Ohvale Oil seal 29x17x5 Code: 01.SD.0707.L
Reference: 01.AS.0321.L
Brand: Ohvale
Ohvale Needle fastener PHBL24 Code: 01.AS.0321.L
Reference: 209.0004
Brand: POLINI
Vespa gaskets series 209.0004 Polini gasket set for: Piaggio, Piaggio Ape 50, Vespa, Vespa 125, Vespa 50, Polini Code: 209.0004
Reference: 01.IF.0026.L
Brand: Ohvale
Complete rear brake system 110 A Code: 01.IF.0026.L
Polini For Race Crankshaft for Minarelli AM6 210.0081
Polini For Race crankshaft for Minarelli AM6 engines, designed for maximum performance on 50cc enduro and motard bikes.
Full rings, 39 mm stroke, forged connecting rod, and C4 bearings included.
