- Reduced price
- New

Xmotorstore Payments
Malossi Gp Mhr exhaust 3212211
Code: 3212211
The racing muffler born on the track for the track.
It is one of the essential components destined for the MALOSSI trophy, specially designed to give the engine a good increase in power at medium and high revs.
Malossi trophies are raced all over the world according to precise formulas, which foresee by regulation pairings of different special Malossi corsa products for each category, in order to achieve optimal and homogeneous results among the various competitors with the use of the most advanced technologies.
With the GP mhr mufflers, Malossi expands the range of trophy mufflers, which express the maximum performance in the sector.
Another Malossi initiative to give the opportunity to all young people who intend to practice a sporting activity in the world of two wheels to become the riders of the future.
TECHNICAL FEATURES
Expansion MUFFLER in special steel sheet (thickness 8/10 mm), obtained with T.I.G. robotic welding procedures. and M.I.G. and handcrafted oxy-acetylene welding. Transparent varnish.
SILENCER in aluminum, anodized Nitro blue.
Malossi exhaust for:
3212211 EXHAUST GP MHR YAMAHA TZR 50 2T LC (MINARELLI AM 6) - MBK X-POWER 50 2T LC (MINARELLI AM 6)
3212211 MALOSSI EXHAUST GP MHR MBK X-POWER 50 2T LC (MINARELLI AM 6)
3212211 MALOSSI EXHAUST GP MHR YAMAHA TZR 50 2T LC (MINARELLI AM 6
Reference: 177.0095
Brand: POLINI
Fuel system for Piaggio Vespino mopedPolini code: 177.0095 Polini fuel system for Piaggio Vespino The Polini fuel system was created to improve the performance of the legendary Piaggio Vespino. This complete kit is designed to optimize the flow of air and fuel, ensuring better efficiency and performance. Kit features: - Polini CP carburetor diameter 21:...
Reference: 01.SB.0508.L
Brand: Ohvale
Ohvale Bolt M6x55 Code: 01.SB.0508.L
Reference: 913097
Brand: C4
Transparent petrol tank for Dellorto PHBG carburetor, the kit includes the gasket and the necessary screws for the assembly.
Reference: AC50
Brand: CS Racing
Red cover in ergal for Cs carburetor
Reference: 280.0059
Brand: POLINI
Polini 100 crankshaft bearing dimensions 25X52X15 C4 Code 280.0059 EAN number 8054705085222 Spare parts for Polini Evolution P.R.E.
Reference: 01.FA.0022.L
Brand: Ohvale
Ohvale RH std Foot fork Adapter 12 15 Code: 01.FA.0022.L
Reference: 174.0188
Brand: POLINI
Sym Maxsym brake pads Code: 174.0188 Application: Sym, Sym Maxsym 400/600 / TL 500
Reference: 2913126
Brand: Malossi
Malossi RACING spring series with external diameter 18.7 mm - wire diameter 2.7 mm - spring length 30.5 mm for original clutchMalossi code: 2913126Springs for original RACING SPRING clutch Springs in pre-hardened carbon steel with high yield strength, with increased load, designed for the most demanding uses.
Reference: Lem-J4
Brand: Lem motor
Motocross Lem J4 250cc 4t. The racing dirt bike that everyone was waiting for. Ideal for kids already started in the world of motocross and adults. 4-stroke single-cylinder Air Cooled engine Displacement 250cc Tank capacity 6,5lt unleaded petrol fuel CDI ignition Pedal start + electric ignition 5-speed manual gearbox type high resistance handlebar with...
Reference: 29 7457
Brand: Malossi
Malossi RACING spring set for original clutch for Piaggio Malossi code: 29 7457 RACING SPRING for ORIGINAL clutch Springs in pre-hardened carbon steel with high yield strength, protected by a high heat resistance paint in various colours. The different colouring highlights the load of each series of springs.
Reference: 249.067
Brand: POLINI
Clutch Honda Sh 300 3G For Race diameter 135 mm Code: 249.067 Diameter: 135 mm Application: Honda, Honda Foresight 250 98/250 99, Honda Forza 250 from 2001/300 ie 4T LC, Honda Jazz 250, Honda Reflex 250, Honda Sh 300i from 2007 to 2014 / 300i E4 from 2015, Peugeot, Peugeot Sv 250, Piaggio, Piaggio X 9 250
Reference: 143.010.011
Brand: POLINI
Cylinder with piston water transfers 3 d.36. Polini code: 143.010.011
Reference: 02.RA.0001.L+02.RP.0001.L
Brand: Ohvale
Marchesini forged aluminum wheels for Ohvale GP-7. Includes OE cush drive. Front: 2.50x17", Rear: 3.50x17". Marchesini wheel kit for Ohvale Gp-7 consisting of: 02.RA.0001.L FRONT WHEEL MARCHESINI RS 17x2.50 - TA71613250NO. 02.RP.0001.L REAR WHEEL MARCHESINI RS 17x3.50 - TA72737350NO.
Reference: 06 3018B
Brand: Malossi
Head gasket thickness 0.5 mm for Malossi cylinder Malossi code: 06 3018B Malossi gasket for MBK 51 V 50 (AV 10) (spare part for Malossi crankshaft 53 5505 discontinued production). Malossi gasket for MBK 88-89 50 (spare part for Malossi crankshaft 53 5505 discontinued production). Malossi gasket for MBK EV 50 (spare part for Malossi crankshaft 53 5505...
Reference: 206.0370
Brand: POLINI
Polini segment diameter 40.3x1.5 mm Polini segment for: Aprilia, Aprilia AF1 50, Aprilia MX 50, Aprilia RS 50, Aprilia RX 50, Aprilia Tuono 50, Beta, Beta RR 50, Fantic Motor Caballero 05, Fantic Motor Enduro competition 50, Fantic Motor Enduro performance 50, Fantic Motor Motard ompetition 50, Fantic Motor Motard performance 50, Hm, Hm Cre 50, Hm...
Reference: 201.2400
Brand: POLINI
Polini Cp carburettor d.24 evolution air starter manual knob. 24 Polini carburetor settings: Maximum jet 112 Minimum Jet 40 Needle 14/22 25x30 valve Pulverizer bush d.2,7 Air wire connection Ø 60 mm Carburetor sleeve Ø 28.5 mm Polini Code: 201.2400
Malossi Gp Mhr exhaust 3212211
Code: 3212211
The racing muffler born on the track for the track.
It is one of the essential components destined for the MALOSSI trophy, specially designed to give the engine a good increase in power at medium and high revs.
Malossi trophies are raced all over the world according to precise formulas, which foresee by regulation pairings of different special Malossi corsa products for each category, in order to achieve optimal and homogeneous results among the various competitors with the use of the most advanced technologies.
With the GP mhr mufflers, Malossi expands the range of trophy mufflers, which express the maximum performance in the sector.
Another Malossi initiative to give the opportunity to all young people who intend to practice a sporting activity in the world of two wheels to become the riders of the future.
TECHNICAL FEATURES
Expansion MUFFLER in special steel sheet (thickness 8/10 mm), obtained with T.I.G. robotic welding procedures. and M.I.G. and handcrafted oxy-acetylene welding. Transparent varnish.
SILENCER in aluminum, anodized Nitro blue.