Xmotorstore Payments
Malossi multivar Mhr variator for Yamaha and Minarelli 50cc 2t. Malossi code: 5113161
The experience gained on the racing fields led us to create a special Racing automatic variator.
With a variator of such technical sophistication, do not be surprised if your scooter acquires a click, a linear shifting, greater mechanical "tranquility" when driving at high speeds and a constant performance unknown to the basic version.
THE NEW MULTIVAR MHR DOES NOT REQUIRE ANY MODIFICATION TO REPLACE THE ORIGINAL.
TECHNICAL NOTES: inside the variator kit there is a mobile half-pulley with a diameter of 99.5 made of a special die-cast aluminum alloy. The contact surface between pulley and belt is super-finished with a diamond tool to ensure a constant coefficient of friction, calculated to prevent slippage of the belt and at the same time to avoid premature wear. In order to respond to the countless calibrations of a racing vehicle, according to the different tracks and engine settings, two series of 6-roller kits and a contrast spring in pre-hardened chromium-silicon steel with anti-clockwise winding are supplied (racing ). In addition, other springs of the same class with differentiated load are available as optional.
Calibration Tips:
The variator is supplied with two different series of rollers: one of gr. 3,9 and one of gr. 4.7 to be able to vary the speed of the shift curve of your scooter by perfectly adjusting the speed and pickup.
Dekra Certification GmbH has certified that Malossi, in the production of complete variators? CVT groups, has introduced and effectively applies a quality management system that complies with the requirements of German and international road traffic law (KBA).
Malossi multivar Mhr variator for Yamaha and Minarelli 50cc 2t. Malossi code: 5113161
The experience gained on the racing fields led us to create a special Racing automatic variator.
With a variator of such technical sophistication, do not be surprised if your scooter acquires a click, a linear shifting, greater mechanical "tranquility" when driving at high speeds and a constant performance unknown to the basic version.
THE NEW MULTIVAR MHR DOES NOT REQUIRE ANY MODIFICATION TO REPLACE THE ORIGINAL.
TECHNICAL NOTES: inside the variator kit there is a mobile half-pulley with a diameter of 99.5 made of a special die-cast aluminum alloy. The contact surface between pulley and belt is super-finished with a diamond tool to ensure a constant coefficient of friction, calculated to prevent slippage of the belt and at the same time to avoid premature wear. In order to respond to the countless calibrations of a racing vehicle, according to the different tracks and engine settings, two series of 6-roller kits and a contrast spring in pre-hardened chromium-silicon steel with anti-clockwise winding are supplied (racing ). In addition, other springs of the same class with differentiated load are available as optional.
Calibration Tips:
The variator is supplied with two different series of rollers: one of gr. 3,9 and one of gr. 4.7 to be able to vary the speed of the shift curve of your scooter by perfectly adjusting the speed and pickup.
Dekra Certification GmbH has certified that Malossi, in the production of complete variators? CVT groups, has introduced and effectively applies a quality management system that complies with the requirements of German and international road traffic law (KBA).
Reference: A3501
Brand: Alfano
Extension 250 mm for Alfano magnetic sensor A3501
Reference: 060026
Brand: T4TUNE
TWIN CARBON 23W & 12V approved motorcycle indicators Code: 060026 Ean: 9900000001025
Reference: FD-M023-00
Brand: Formula
Return spring pads Formula Universal for all minimoto Code: FD-M023-00
Reference: 143.730.014
Brand: POLINI
Air valve for front racing rim for Polini minimoto. Polini code: 143.730.014
Reference: 4620013
Brand: Malossi
Malossi Rs24 rear shock absorber for Italjet 4620013 Malossi code: 4620013 Malossi rear shock absorber Rs24, wheelbase 275 mm for 10" wheel. The versatility of this suspension has proven surprising thanks to the 3 new adjustment systems, which enhance its use on the road and track: -adjustment of the hydraulic system in extension to absorb all the...
Reference: 25 8069B
Brand: Malossi
Original Malossi cap for Multivar variator. Code 25 8069B. High-quality replacement for sport scooters. Made in Italy.
Reference: 61 9591
Brand: Malossi
Malossi X K belt for Suzuki Katana 50 cc 1998 with 17x8x781 mm angle 30 Malossi code: 61 9591 Malossi belt for SUZUKI KATANA 50 2T for vehicles PRODUCED <-- 1998. Malossi belt for SUZUKI KATANA 50 2T LC for vehicles PRODUCED <-- 1998.
Reference: 5519814
Brand: Malossi
Malossi Force master 2.1 electronic control unit 5519814 for Honda Malossi code: 5519814 The Force Master 2.1 ECU is much easier to configure. Making products more ergonomic and simple to use has always been a Malossi objective: Force Master 2.1 is a contemporary, adequate and super performing product. With an interface for the K and CAN communication...
Reference: 110/90-6.5
Brand: Lem motor
Inner tube for electric scooter Inner tube size 110 / 90-6.5
Reference: 3214430
Malossi 3214430 Power Exhaust Code: 3214430 In Malossi there was a strong desire to associate the glorious C.V.F. and to the reed valve fuel systems that have been the focal point of the evolution of steel-bodied scooters, a series of special mufflers. The new POWER EXHAUST, sports exhaust systems, recalculated, with a modern and gritty line, very...
Reference: 202.1352
Brand: POLINI
Elongated secondary gear Peugeot Buxy Z 16-44 Code: 202.1352 Application: Peugeot, Peugeot Buxy 50, Peugeot Elyseo 50, Peugeot Jet force 50 Carburettor / 50 injection, Peugeot Ludix 50/50 Blaster, Peugeot Rs 50 Buxy, Peugeot Speedake 50, Peugeot Squab 50, Peugeot Tkr 50 Off road, Peugeot Trekker 50 , Peugeot Vivacity 50
Reference: 25HG-A
Brand: XRACING
Reinforced universal minimoto chain for racing use. The most used chain for Italian and non-Italian minimotos, in all minimoto championships in the world. Chain length: 158 links. Application: Dm minimoto chain. Stamas minimoto chain. Grc minimoto chain. Blata minimoto chain. Polini minimoto chain. Features of the xmotorstore reinforced minimoto chain:...
Reference: 204.0937/A
Brand: POLINI
Polini piston diameter 47.6 mm, selection A (47.545 mm) 204.0937/A Polini piston diameter 47.6 mm, for Yamaha, pin 10 mm for crossbar cylinder selection A (47.545 mm) Polini piston for: Aprilia, Aprilia Aera 51, Aprilia Gulliver 50, Aprilia Rally 50, Aprilia Sonic 50, Aprilia Sr 50, Benelli, Benelli 491 50, Benelli K2 50, Beta, Beta Ark 50, Beta Eikon 50,...
Reference: 7010
Brand: STAMAS
Torque spacers aluminium for fixing head engine h2o Stamas
Reference: 01.CA.0030.L
Brand: Ohvale
Ohvale Fairing screw M6 Code: 01.CA.0030.L
Reference: 204.0620
Brand: POLINI
Polini piston diameter 47 mm Polini piston for all types of motorcycles
Malossi multivar Mhr variator for Yamaha and Minarelli 50cc 2t. Malossi code: 5113161
The experience gained on the racing fields led us to create a special Racing automatic variator.
With a variator of such technical sophistication, do not be surprised if your scooter acquires a click, a linear shifting, greater mechanical "tranquility" when driving at high speeds and a constant performance unknown to the basic version.
THE NEW MULTIVAR MHR DOES NOT REQUIRE ANY MODIFICATION TO REPLACE THE ORIGINAL.
TECHNICAL NOTES: inside the variator kit there is a mobile half-pulley with a diameter of 99.5 made of a special die-cast aluminum alloy. The contact surface between pulley and belt is super-finished with a diamond tool to ensure a constant coefficient of friction, calculated to prevent slippage of the belt and at the same time to avoid premature wear. In order to respond to the countless calibrations of a racing vehicle, according to the different tracks and engine settings, two series of 6-roller kits and a contrast spring in pre-hardened chromium-silicon steel with anti-clockwise winding are supplied (racing ). In addition, other springs of the same class with differentiated load are available as optional.
Calibration Tips:
The variator is supplied with two different series of rollers: one of gr. 3,9 and one of gr. 4.7 to be able to vary the speed of the shift curve of your scooter by perfectly adjusting the speed and pickup.
Dekra Certification GmbH has certified that Malossi, in the production of complete variators? CVT groups, has introduced and effectively applies a quality management system that complies with the requirements of German and international road traffic law (KBA).
