Xmotorstore Payments
Malossi Gp Mhr exhaust 3212209
Code: 3212209
The racing muffler born on the track for the track.
It is one of the essential components destined for the MALOSSI trophy, specially designed to give the engine a good increase in power at medium and high revs.
Malossi trophies are raced all over the world according to precise formulas, which foresee by regulation pairings of different special Malossi corsa products for each category, in order to achieve optimal and homogeneous results among the various competitors with the use of the most advanced technologies.
With the GP mhr mufflers, Malossi expands the range of trophy mufflers, which express the maximum performance in the sector.
Another Malossi initiative to give the opportunity to all young people who intend to practice a sporting activity in the world of two wheels to become the riders of the future.
TECHNICAL FEATURES
Expansion MUFFLER in special steel sheet (thickness 8/10 mm), obtained with T.I.G. robotic welding procedures. and M.I.G. and handcrafted oxy-acetylene welding. Transparent varnish.
SILENCER in aluminum, anodized Nitro blue.
Malossi exhaust for:
3212209 EXHAUST GP MHR DERBI GPR RACING 50 2T LC up to 2003 (EBE050 - EBS050)
3212209 EXHAUST MALOSSI GP MHR DERBI GPR RACING 50 2T LC up to 2003 (EBE050 - EBS050)
Reference: 0619963
Brand: Malossi
2 Malossi O-rings diameter 57 Malossi code: 0619963
Reference: 3213154
Brand: Malossi
Malossi silencer diameter 60x21 mm for GP and SUPERMOTO MHR exhausts Malossi code: 3213154
Reference: 6716721
Brand: Malossi
Malossi HTQ primary gears z 23 / 64 for Vespa 6716721 Malossi code: 6716721. The Malossi HTQ gears for Vespa PX collect the legacy of the first gear project produced by Malossi between the late 80s and early 90s. Completely redesigned, this pair of primary gears uses a straight tooth configuration instead of the standard helical ones.
Reference: 5210.03-01
Brand: Domino
Domino Krk Evo 5210.03-01 throttle control without knobs. Aluminum gas control. 100% compatible with original KTM offroad 4T cables With 4 ring nuts supplied for greater speed adjustment Honda, Kawasaki, Husaberg, Husqvarna, Suzuki and KTM throttle cables available for off-road mods. Racing use. Support material: Aluminum Support finish: Painted Max...
Reference: 174.0013
Brand: POLINI
Original Polini brake pads Code: 174.0013 Application: Benelli, Benelli Devil 50, Benelli Spring 50, Gilera, Gilera 503, Gilera Bullit 50, Malaguti, Malaguti Dune 50, Malaguti F 12 50 Phantom LC, Malaguti Fifty 50 H2O / 50 TOP, Malaguti RCX / W 50 H2O, Motron , Motron Compact ES, Motron Sting, Motron Xle The original Polini brake pads are the pads that...
Reference: 143.075.011
Brand: POLINI
Original Polini sprocket guard for Reverso minimoto engine. Code 143.075.011. Essential protection for rider and transmission.
Reference: 1611021
Brand: Malossi
Fuel system mhr phbg 19 bs. Malossi code: 1611021. MALOSSI's MHR PHF 34 fuel systems are tailor-made for uprated engines, offering a complete kit with all the necessary accessories for easy assembly. These systems represent excellence in the sector, developed by MALOSSI, a leading company in the design and production of special fuel systems for...
Reference: 01.AT.0015.L
Brand: Ohvale
Ohvale steering damper 01.AT.0015.L Ohvale has developed a dedicated and exclusive steering damper kit for the OHVALE GP-0 and OHVALE GP-2 models. The shock absorber is characterized by a specific Ohvale calibration, the use of special seals guarantees maximum smoothness which transmits to the rider maximum sensitivity with the front end. The calibration...
Reference: 140.0065/ST
Brand: POLINI
Polini cylinder kit diameter 43 mm without head, pin diameter 12 mm. Polini Code: 140.0065 / ST Polini cylinder kit for: Piaggio, Piaggio Boxer, Piaggio Bravo, Piaggio Cba, Piaggio Ciao, Piaggio Eco, Piaggio Grillo, Piaggio Si, Gilera, Gilera Cba Cast iron cylinder 12 mm diameter pin Headless
Reference: Pmt 10x2,50 R6 e-fire
Brand: PMT TYRES
Pmt E-fire 10x2,50 6 inches. The new generation Pmt rubber for e-scooters, suitable for 6-inch rims. Category: E-Scooters Type: 10 "x 2.50 (R6.0) Design type: Urban Compound hardness: 52 Shore A Rubber width: 65 mm Internal diameter: 155 mm External diameter: 250 mm Design use: Street Use of compound: Universal Rim width: 35-45mm Pressures: 1.2-2.2 Bar /...
Reference: 0612268B
Brand: Malossi
Malossi intake gasket thickness 0.5 mm Malossi code: 0612268B
Reference: 01.SB.1007.L
Brand: Ohvale
Ohvale Pin piston Code: 01.SB.1007.L
Reference: 175.0033
Brand: POLINI
Polini brake disc for Honda Sh 125/150-Forza, Jaz 250 diameter 240 mm Code: 175.0033 Application: Honda, Honda Foresight 250, Honda Forza 250, Honda Jazz 250, Honda Reflex 250, Honda Pantheon 125 2T / 125 Inject / 150 2T / 150 Inject, Honda SH 125i / 125i ABS E3 / 125i ABS E4 / 125i MODE ie 4T H2O / 125i ABS / 150i / 150i ABS E3 / 150i ABS / 150i ABS E4,...
Reference: TCM120
Brand: Tecnominimoto
TCM junior minimoto exhaust for 10 and 12 mm flanged engines. Tecnomoto junior minimoto muffler for flanged 10 and 12 mm with non-decomposable manifold. Complete exhaust for minimoto with junior engine for 40cc 2t air-cooled engines, with 10 and 12 mm flange. Muffler compatible with: TCM / BZM / OR / POLINI / MALOSSI / ZOCCHI.
Reference: 1314516b
Brand: Malossi
Malossi sleeve diameter 22 in FKM (for PIAGGIO engines) Malossi code: 1314516b
Reference: 5517516
Brand: Malossi
Malossi 5517516 flywheel and fan assembly Code: 5517516 Malossi flywheel and fan assembly for Vespower ignition. Flywheel dimensions diameter 125X42 mm
Reference: 01.AS.0302.L
Brand: Ohvale
Ohvale Fuel banjo PHBL24 Code: 01.AS.0302.L
Reference: 01.SD.0610.L
Brand: Ohvale
Ohvale Bolt hexagon flange M6x90 Code: 01.SD.0610.L
Malossi Gp Mhr exhaust 3212209
Code: 3212209
The racing muffler born on the track for the track.
It is one of the essential components destined for the MALOSSI trophy, specially designed to give the engine a good increase in power at medium and high revs.
Malossi trophies are raced all over the world according to precise formulas, which foresee by regulation pairings of different special Malossi corsa products for each category, in order to achieve optimal and homogeneous results among the various competitors with the use of the most advanced technologies.
With the GP mhr mufflers, Malossi expands the range of trophy mufflers, which express the maximum performance in the sector.
Another Malossi initiative to give the opportunity to all young people who intend to practice a sporting activity in the world of two wheels to become the riders of the future.
TECHNICAL FEATURES
Expansion MUFFLER in special steel sheet (thickness 8/10 mm), obtained with T.I.G. robotic welding procedures. and M.I.G. and handcrafted oxy-acetylene welding. Transparent varnish.
SILENCER in aluminum, anodized Nitro blue.
