Xmotorstore Payments
Malossi ignition with internal rotor for Piaggio 50cc h2o 2t scooter. Malossi Code: 5519632
Attention: EXCLUDES THE ORIGINAL ELECTRICAL SYSTEM.
Variable advance control unit equipped with 3 trimmers:
MAPS trimmer: advance map selection
OFFSET trimmer: selected map shift + or - 2 °
LIM trimmer: speed limiter intervention variation (16 possible positions)
8 preset mappings:
1 for 4T variable advance engines
6 for 2-stroke engines with variable advance
1 with fixed advance
System based on uP STM8 - 8 Bit with superior computing capacity @ 20 MIPS (millions of instructions per second).
Reduction of calculation times, better precision and stability of the advance implementation.
Hardware architecture with improved noise immunity.
Wiring with 105 ° C temperature class.
Changeover switch for compensation of flywheel error of +/- 2 ° with discretization of 0.5 °.
Eight advance tables selectable via external switch.
Advance tables vector consisting of 24 linear interpolation breakpoints.
Runaway management by means of an external 16-position switch.
Soft cut for a gradual intervention of the limiter.
15 limiter adjustment positions from 11,500 to 14,300 with steps of 200 RPM, plus one position for limiter exclusion.
Malossi ignition with internal rotor for Piaggio 50cc h2o 2t scooter. Malossi Code: 5519632
Attention: EXCLUDES THE ORIGINAL ELECTRICAL SYSTEM.
Variable advance control unit equipped with 3 trimmers:
MAPS trimmer: advance map selection
OFFSET trimmer: selected map shift + or - 2 °
LIM trimmer: speed limiter intervention variation (16 possible positions)
8 preset mappings:
1 for 4T variable advance engines
6 for 2-stroke engines with variable advance
1 with fixed advance
System based on uP STM8 - 8 Bit with superior computing capacity @ 20 MIPS (millions of instructions per second).
Reduction of calculation times, better precision and stability of the advance implementation.
Hardware architecture with improved noise immunity.
Wiring with 105 ° C temperature class.
Changeover switch for compensation of flywheel error of +/- 2 ° with discretization of 0.5 °.
Eight advance tables selectable via external switch.
Advance tables vector consisting of 24 linear interpolation breakpoints.
Runaway management by means of an external 16-position switch.
Soft cut for a gradual intervention of the limiter.
15 limiter adjustment positions from 11,500 to 14,300 with steps of 200 RPM, plus one position for limiter exclusion.
Reference: 5519640
Brand: Malossi
Malossi high voltage coil 5519640
Reference: 5517976B
Brand: Malossi
Malossi Digitronic Mhr code 5517976B digital electronic control unit Malossi digital electronic control unit Digitronic Mhr Team with Trimmer.
Reference: 5517977B
Brand: Malossi
Malossi rotor and stator assembly for Piaggio engines 5517977B Code: 5517977B Malossi rotor and stator assembly for Piaggio engines, diameter 58 mm
Reference: 5515740
Brand: Malossi
Malossi 5515740 strobe controller Code: 5515740 This small-sized instrument not only allows the advance to be checked with disarming ease, thanks to a 200 lm flash with a duration of 10 µs and an extremely short delay (<1µs), but it also completely replaces the classic strobe guns, thanks to the its technical characteristics decidedly superior to many...
Reference: 5517650
Brand: Malossi
Malossi inertia flywheel 5517650 Code: 5517650 Malossi inertia flywheel for internal rotor ignition Weight: 201 g
Reference: 5519119B
Brand: Malossi
Shielded Malossi spark plug cap 5519119B Malossi code: 5519119B
Reference: 5519221
Brand: Malossi
Malossi spark plug cable and shielded spark plug cap kit 5519221 Malossi code: 5519221 Shielded spark plug connection - Spark plug connection equipped with a high quality resistor, which guarantees constant resistance with minimal variations in overload conditions. -External body made with a robust rubber structure characterized by excellent resistance to...
Reference: 4917553
Brand: Malossi
Complete C-One 70cc Malossi 4917553 engine for Piaggio engine Malossi code: 4917553 Complete C-One 70cc engine. Engine not assembled. For Piaggio engine, 10 wheel.
Reference: 4917552
Brand: Malossi
Complete C-One 70cc Malossi 4917552 engine for Piaggio engine Malossi code: 4917552 Complete C-One 70cc engine. Engine not assembled. For Piaggio engine, 12/13 wheel.
Reference: 4917551
Brand: Malossi
Complete Rc-One 94cc Malossi 4917551 engine for Piaggio engine Malossi code: 4917551 Complete Rc-One 94cc engine. Engine not assembled. For Piaggio engine, 10 wheel.
Reference: 4917550
Brand: Malossi
Complete Rc-One 94cc Malossi 4917550 engine for Piaggio engine Malossi code: 4917550 Complete Rc-One 94cc engine. Engine not assembled. For Piaggio engine, 12/13 wheel.
Reference: 4917546
Brand: Malossi
Complete Rc-One 94cc Malossi 4917546 engine for Yamaha engine Malossi code: 4917546 Complete Rc-One 94cc engine. Engine not assembled. For Yamaha engine.
Reference: 246472214
Brand: Evok
EVOK Iron LED chrome front headlight for Vespa PK 50 and 125 S / XL, product code 246472214. 6000K LED, 3 lenses with Angel Eyes, voltage converter included, Plug&Play installation.
Reference: 075113
Brand: C4
Kymco Air 50 2T cylinder bearings and gaskets kit
Reference: 04.ST.0020.L
Brand: Ohvale
Black Ohracing clip-on handlebar with dedicated angle for Ohvale GP-0 and GP-2. Compatible only with Ohracing clamps. Diameter: 22 mm. Length: 270 mm. ATTENTION THIS OHRACING SPECIAL PARTS PRODUCT: IS PART OF THE DEVICES PERMITTED FOR OFFICIAL OHVALE SPORTING ACTIVITIES.
Reference: 050223
Brand: T4TUNE
SUPERBIKE CARBON adhesive tank protection. Universal for motorcycles. Tank protection dimensions: Height at the highest point: 23 cm (Tips) Central height: 21 cm (Between half moon and lowest point). Upper part width: 12.5 cm Lower part width: 5 cm
Reference: 001002R061A0
Brand: DM
Small screen for DM black color, compatible with original Dm fairings. DM Code: 001002R061A0
Reference: 5913877
Brand: Malossi
Malossi Power cam camshaft 5913877 Malossi S.p.A. presents a new camshaft for 4-stroke scooters, designed with the Cad-Cam system and manufactured with extreme precision. Ideal for giving your scooter a sporty character, it ensures excellent performance, with greater torque, acceleration and high cruising speed. Perfect for city traffic and long...
Reference: 3116144
Brand: Malossi
Malossi cylinder diameter 49 in aluminum with pin diameter 10 4T Malossi code: 3116144
Reference: 3113067
Brand: Malossi
Malossi cylinder diameter 47 in cast iron with pin diameter 12 Malossi code: 3113067 Malossi cylinder for Benelli Pepe LX 50 2T euro 2 (QJ1E40QMB-4). Also adaptable to the original head. Fit only with Malossi exhausts. Malossi cylinder for Benelli QuattronoveX 50 2T euro 2. Also adaptable to the original head. Fit only with Malossi exhausts. Malossi...
Reference: 01.CA.0083.L
Brand: Ohvale
Ohvale Lateral fairing RT L Painted Code: 01.CA.0083.L
Reference: 3219732b
Brand: Malossi
Malossi DB Killer Malossi Code: 3219732b
Reference: 213.0536
Brand: POLINI
Polini carbon reeds set 39x32 mm 0.30 and 0.35 mm for Piaggio 50cc. Polini Code: 213.0536
Reference: 144.040.003
Brand: POLINI
Polini Xp4 110/125 2007 head gasket. Polini code: 144.040.003
Reference: tmc029
Brand: Tecnominimoto
Minimoto water pump reduced pulley. The reduced pulley "in the external diameter" is used to increase the number of rotations of the minimoto water pump impeller, forcing a greater recirculation of the water. External diameter: 33 mm. Internal diameter: 8 mm.
Reference: IMB-41100
Brand: CS Racing
Intake manifold insert diameter 15
Reference: 6114134B
Brand: Malossi
Malossi movable half-pulley for MULTIVAR 2000 Malossi code: 6114134B
Malossi ignition with internal rotor for Piaggio 50cc h2o 2t scooter. Malossi Code: 5519632
Attention: EXCLUDES THE ORIGINAL ELECTRICAL SYSTEM.
Variable advance control unit equipped with 3 trimmers:
MAPS trimmer: advance map selection
OFFSET trimmer: selected map shift + or - 2 °
LIM trimmer: speed limiter intervention variation (16 possible positions)
8 preset mappings:
1 for 4T variable advance engines
6 for 2-stroke engines with variable advance
1 with fixed advance
System based on uP STM8 - 8 Bit with superior computing capacity @ 20 MIPS (millions of instructions per second).
Reduction of calculation times, better precision and stability of the advance implementation.
Hardware architecture with improved noise immunity.
Wiring with 105 ° C temperature class.
Changeover switch for compensation of flywheel error of +/- 2 ° with discretization of 0.5 °.
Eight advance tables selectable via external switch.
Advance tables vector consisting of 24 linear interpolation breakpoints.
Runaway management by means of an external 16-position switch.
Soft cut for a gradual intervention of the limiter.
15 limiter adjustment positions from 11,500 to 14,300 with steps of 200 RPM, plus one position for limiter exclusion.
