Xmotorstore Payments
Cover for Alfano 6 and 7.
Alfano Code: A5210
Protective cover for Alfano 6 and 7 instruments.
Cover for Alfano 6 and 7.
Alfano Code: A5210
Protective cover for Alfano 6 and 7 instruments.
Reference: A5005
Brand: Alfano
Alfano 6 support for cars. Code: A5005. This bracket is designed to fix the Alfano 6 on the car windshield.
Reference: A2101
Brand: Alfano
45 cm "NTC" M10 water temperature sensor A2101. This NTC technology sensor with a 10mm metric thread can be connected either to the motor head if the motor has a hole designed to install this sensor or this sensor can be installed on an aluminum durit adapter, ref. A261, A262, A263, A264. Note: This sensor must be used with an A3301 extension cable or...
Reference: A2102
Brand: Alfano
Water temperature sensor with 1/8GAS 45 cm thread A2102. This NTC technology sensor with 1 / 8GAS thread can be connected to the motor head if the motor has a hole designed to install this sensor. Note: This sensor must be used with an A3301 extension cable or A2190 hub.
Reference: A2103
Brand: Alfano
45 cm M5 water temperature sensor A2103. This NTC technology sensor with a 5mm metric thread can be connected to the motor head if the motor has a hole designed to install this sensor. Note: This sensor must be used with an A3301 extension cable or A2190 hub.
Reference: A2104
Brand: Alfano
45 cm candle temperature sensor A2104. This normal version NTC sensor must be installed with a 14mm diameter spark plug. Caution: It is important to remove the sealing washer from the spark plug before installation. Note: This sensor must be used with an A3301 extension cable or A2190 hub.
Reference: A272A
Brand: Alfano
A272A exhaust connection to fix the Alfano A2151 sensor
Reference: A2154
Brand: Alfano
Water temperature sensor M5 40 cm A2154. This K-technology thermocouple sensor with a 5mm metric thread can be connected to the motor head if the motor has a hole designed to install this sensor. Note: This sensor must be used with an A3401 extension cable or A2190 hub.
Reference: 03.TE.0190.L
Brand: Ohvale
Alfano support for Ohvale Gp-0 and Gp-2. Ohvale code: 03.TE.0190.L Support to mount the Alfano instrumentation on Ohvale. The Ohvale support for Alfano is applied to the radiator attachment, using the supports already present as standard on all Ohvale. The kit includes the Alfano support plate and the following screws: 2x TBEI 6x35 and 2x TBEI 6x30. These...
Reference: 01.SC.0048.L
Brand: Ohvale
Ohvale Bottom DbKiller 190/212 Code: 01.SC.0048.L
Reference: 6215015BS
Brand: Malossi
Malossi MHR Synt approved brake pads Malossi code: 6215015BS Malossi brake pads for BENELLI ADIVA 125 4T (LEADER) Rear for vehicles produced from 2000 APPROVED Malossi brake pads for BENELLI ADIVA 150 4T (LEADER) Rear for vehicles produced from 2000 APPROVED Malossi brake pads for GILERA DNA 125 4T LC Rear for vehicles produced from 2000 APPROVED Malossi...
Reference: 202.1386
Brand: POLINI
Gear Kymco Dink 125/150 Z 14-37 Code: 202.1386 For 10 "wheel Application: Kymco, Kymco Dink 125 LC / 150 LC, Kymco Grand Dink 150
Reference: 03.ST.0053.L
Brand: Ohvale
Black upper triple clamp for Ohvale GP-0 evo and GP-2. Ohvale Part Number: 03.ST.0053.L Ohvale steering plate dimensions: Fork stem hole diameter: 45 mm. Fork stem hole center distance: 180 mm. Clamp thickness: 16 mm. Center pivot hole: 22 mm.
Reference: 218.0054
Brand: POLINI
Silencer for Polini low enduro exhaust 218.0054 Muffler measures: Outside diameter: 70 mm Muffler inlet diameter: ND Length: 280 mm
Reference: 100600610
Brand: RMS
Piaggio Ape 50cc air filter. The air filter for Ape 50cc, Ape Fl, Fl2, Fl3, Mix, Rst, Tm P.
Reference: 01.FA.0015.L
Brand: Ohvale
K7 Ohvale front fork spring for GP-0 and GP-2 with 33mm legs. Ohvale code: 01.FA.0015.L Attention: price for single spring.
Reference: 6117987B
Brand: Malossi
Mallossi K-DRIVE z58 crown Malossi code: 6117987B Malossi crown for KYMCO AK 550 ie 4T LC euro 4 2017-2020 (SAA1). Malossi crown for KYMCO AK 550 ie 4T LC euro 5 2021 (SBA1).
Reference: 11 5651b
Brand: Malossi
Complete Malossi gasket kit for 47 diameter cylinder for original head for Franco Morini GSA engine Malossi code: 11 5651b Malossi gaskets for Malaguti Fifty 50 LC (F.Morini GSA). Spare part for Malossi cylinder 31 6094: production discontinued. Malossi gaskets for Malaguti Fifty Top (4 gears) 50 LC (F.Morini GSA). Spare part for Malossi cylinder 31 6094:...
Reference: N GRAY
Brand: HJC
Hjc i80 helmet. "APC" Advanced Polycarbonate Compound: By blending premium polycarbonate with high impact resistant ABS in an optimal ratio, HJC has developed a strong and impact resistant shell, while maintaining a lightweight design. "ACS" Advanced Channeling Ventilation System: 2-level upper vents and lower vents; Full front to back airflow expels heat...
Reference: Grf.Blt.Monster
Brand: XRACING
Adhesive graphics for Blata Origami Monster replica minibikes. Renew your Blata Origami minibike with our high quality Monster replica style Adhesive Graphics! Made with industry-premium materials, this graphic is easy to apply directly to the fairing without the use of glue. Customize your style with an on-demand race number. Made to order, fast delivery...
Reference: 171.0022
Brand: POLINI
Polini control unit for Aprilia SXR 50 ie Euro 5 from 2021. Polini code 171.0022. Polini control unit compatibility: APRILIA: SXR 50 ie Euro 5 2021-> (CD32M). The ECM with Polini Valve Springs for Aprilia SXR 50 4T E5 has been designed and developed by the Polini racing department after numerous tests and trials.
Reference: 204.0941/B
Brand: POLINI
Lml piston diameter 60 mm selection B (59,955 mm) Lml piston for: Lml, Lml Star deluxe 150, Lml Star deluxe 125, Polini
Reference: 242.027
Brand: POLINI
Covers for Polini variator rollers. 242.026 COVERS FOR VARIAT. ROLLS D.19 242.027 COVERS FOR VARIAT. ROLLS D.15 242.028 COVERS FOR VARIAT. ROLLS D.16
Reference: 6712497
Brand: Malossi
Malossi helical primary gears z 14 / 45 for Honda 6712497 Malossi code: 6712497. Malossi helical primary gears z 14 / 45 Honda. The new HTQ gears have been designed and manufactured with straight/helical teeth to minimize friction losses and stress on the supports. Furthermore, our gears optimize the ratio allowing you to exploit all the power delivered...
Reference: 001002R003A0
Brand: DM
Anti-vibration inserts kit for DM 3-piece rear fender. DM Code: 001002R003A0
Cover for Alfano 6 and 7.
Alfano Code: A5210
Protective cover for Alfano 6 and 7 instruments.
