Xmotorstore Payments
45 cm M5 water temperature sensor A2103. This NTC technology sensor with a 5mm metric thread can be connected to the motor head if the motor has a hole designed to install this sensor.
Note: This sensor must be used with an A3301 extension cable or A2190 hub.
45 cm M5 water temperature sensor A2103. This NTC technology sensor with a 5mm metric thread can be connected to the motor head if the motor has a hole designed to install this sensor.
Note: This sensor must be used with an A3301 extension cable or A2190 hub.
Reference: A3301
Brand: Alfano
Extension for "NTC" sensors Alfano 135 cm A3301. Extension of "NTC" technology to connect all Alfano NTC sensors.
Reference: A2190
Brand: Alfano
Y extension to connect 2 Alfano A2190 sensors. Y extension to connect 2 sensors: a K technology thermocouple sensor + an NTC technology sensor
Reference: 51 7160
Brand: Malossi
Malossi Multivar 51 7160 Variator for Peugeot Code: 51 7160 Malossi Multivar variator for mopeds and Peugeot. Multivar is very simple to apply and easy to operate. It is studied in every detail and tested on each specific application. With such a sophisticated variator, your scooter will acquire snap, shift linearity and greater mechanical "tranquility"...
Reference: 51 6798
Brand: Malossi
Malossi Varplus 51 6798 variator for Mbk Code: 51 6798 By replacing and combining the 18 rollers supplied, it is possible to control the opening from 2500 to 8500 rpm gradually. VARPLUS allows you to optimize the use of your motor to the maximum and to obtain great energy savings. OPERATION The rotation imparts to the masses, as a function of their...
Reference: 001002R031A0
Brand: DM
Gas cover DM 2 pieces. Transparent plastic. DM Code: 001002R031A0
Reference: 6118987
Brand: Malossi
Malossi X Special belt strap for maxiscooter 24x10.6x952 angle 30 Malossi code: 6118987 Malossi belt for HONDA SH i ABS 125 ie 4T LC euro 5 2020 2023 (JF90E). Malossi belt for HONDA SH i ABS 125 ie 4T LC euro 5 2024 (JF90E). Malossi belt for HONDA SH i ABS 150 ie 4T LC euro 5 2020->2023. Malossi belt for HONDA SH i ABS 150 ie 4T LC euro 5 2024->...
Reference: TCMINI49
Brand: Tecnominimoto
Minibike rim red for Dm Grc Tcm. Minibike rim with new racing design, entirely machined from solid, 58 mm internal groove section. Rim compatible with hubs: TCM, DM, GRC and CBM.
Reference: 248.128
Brand: POLINI
Variator belt Yamaha X Max 300 Code: 248.128 Application: Variator belt Yamaha X Max 300 ie E4 from 2017
Reference: 248.132
Brand: POLINI
Polini variator belt for Kymco X Citing i 400. Code: 248.132 Application: Kymco, Kymco X Citing 400 i / 400 i Euro 4
Reference: 215.0450
Brand: POLINI
Polini 360 degree intake manifold sleeve 35mm. Polini Code: 215.0450
Reference: 01.FA.0008.L
Brand: Ohvale
Tcei screw m6x25 uni 5931 Ohvale. Ohvale code: 01.FA.0008.L
Reference: 4021
Brand: STAMAS
Pair of brake pads racing for caliper factory Stamas
Reference: 01.SW.0709.L
Brand: Ohvale
Ohvale Crankshaft connecting rod-assy Code: 01.SW.0709.L
Reference: KITOS500811
Brand: Braking
Complete kit of oversized 267 mm Braking discs for T-max 500 from 2008 to 2011. Kit code: KITOS500811 Kit composed by: WF8501, S38017, P30786, P30904.
Reference: 190.0059
Brand: POLINI
Kymco K-XCT 300I 2013/16 exhaust. Polini Code: 190.0059 Approved for: KYMCO K-XCT 300i TYPE D8 var. 00 ver. 00/10 European homologation norm 97/24 / EC chap. 9 (referred to noise and power control) Catalyst code 197.0023
Reference: 241.480
Brand: POLINI
Polini Variator for Kymco Cx Djy Code: 241.480 Application: Kymco, Kymco Cx 50 / Super, Kymco DJY 50, Kymco DJ 50 World, Kymco Heroism 50
Reference: 01.SE.0202.L
Brand: Ohvale
Ohvale tank crosspiece. Code: 01.SE.0202.L Plate thickness: 1.5 mm. Outer hole spacing: 140 mm. Inner hole spacing: 80 mm.
Reference: PT0.0021
Brand: CS Racing
CS Racing minimoto clutch plate. Dual-mass clutch plate, compatible with CS, Polini, BZM, IAME, TCM clutches, and others. Dedicated clutch plate for Junior A and Junior B single-engine bikes! CIV approved.
45 cm M5 water temperature sensor A2103. This NTC technology sensor with a 5mm metric thread can be connected to the motor head if the motor has a hole designed to install this sensor.
Note: This sensor must be used with an A3301 extension cable or A2190 hub.
