Xmotorstore Payments
Water temperature sensor with 1/8GAS 45 cm thread A2102. This NTC technology sensor with 1 / 8GAS thread can be connected to the motor head if the motor has a hole designed to install this sensor.
Note: This sensor must be used with an A3301 extension cable or A2190 hub.
Water temperature sensor with 1/8GAS 45 cm thread A2102. This NTC technology sensor with 1 / 8GAS thread can be connected to the motor head if the motor has a hole designed to install this sensor.
Note: This sensor must be used with an A3301 extension cable or A2190 hub.
Reference: 01.SB.0501.L
Brand: Ohvale
Ohvale Cap small view hole Code: 01.SB.0501.L
Reference: 250.040
Brand: POLINI
Polini clutch bell for Piaggio Medley Evolution model diameter 134 mm Code 250.040 This Polini clutch bell is compatible as an original spare. Diameter: 134 mm Weight: 950 gr Application: Piaggio, Piaggio Medley 125 ie 4T 4V E4 / 150 ie 4T 4V E4, Vespa, Vespa 125 4T GTS ie LC E4 4V / 150 4T GTS ie LC E4 4V
Reference: 206.0208
Brand: POLINI
Chromed segment 47.4x1.2 mm 206.0208
Reference: 204.0829/C
Brand: POLINI
Polini piston diameter 50 mm selection C (49.965 mm) Polini piston for: Aprilia, Aprilia RX-SX 50, Aprilia RS 50, Aprilia RS4 50, Bultaco, Bultaco Astro 50, Bultaco Lobito 50, Derbi, Derbi GPR 50, Derbi Senda 50 DRD R, Derbi Senda 50 DRD SM, Derbi Senda 50 DRD, Derbi SM, Derbi Senda 50 Extreme, Derbi Senda 50 Extreme SM, Derbi Senda 50 R, Gilera, Gilera...
Reference: hjc-rpha-1-lovis
Brand: HJC
Hjc Rpha 1 Lovis helmet. The RPHA 1 was designed and developed after several years of focused efforts and crucial feedback from the world's best MotoGP athletes. The best engineers at the HJC company set to work to create a racing helmet that is truly worthy of the best circuits around the world. The RPHA 1 is the same model used by HJC's world-class...
Reference: 174.2019
Brand: POLINI
Polini sintered brake pads 41x94,2x10 mm Code: 174.2019 Application: Italjet, Italjet Jupiter 250, Mbk, Mbk Skyliner 250, Mbk Skycruiser 250, Yamaha, Yamaha Majesty 250/400, Yamaha T Max 500
Reference: 02 4357B
Brand: Malossi
Malossi intake manifold 25X27.5X46.5 mm inclined 02 4357B Code: 02 4357B Malossi inclined aluminum intake manifold
Reference: A2401
Brand: Alfano
Alfano steering wheel position sensor. Alfano Code A2401. 80cm FLYING position sensor. This potentiometer sensor is used to measure the position of the steering wheel. Designed for the module: Box12 / Box4Move.
Reference: 0965500 28
Brand: DELLORTO
Dellorto nozzle for AU sprayer on PHBG 0965500 28. Nozzle to be inserted into the PHBG Dellorto carburetor, to be able to mount the AU sprayer. Original Dellorto spare part for Phbg. Attention: In some PHBG carburetors, to mount the following nozzle it will be mandatory to mount the AU sprayer.
Reference: 6118222B
Brand: Malossi
Malossi Fixed Half Pulley Malossi Code: 6118222B This fixed pulley is 15 degrees with a diameter of 102 mm, is gas nitrided hardened to induce excellent durability, has a positive double “d” assembly on the hub and is fixed with a Zinc plated M24 nut.
Reference: 209.0332
Brand: POLINI
Gasket set for Vespa 50 diameter 47 mm racing 209.0332 Polini gaskets series for: Piaggio, Vespa, Vespa 50, Polini Code: 209.0332
Reference: 5517526
Brand: Malossi
Malossi Force Master 2 5517526 electronic control unit for Honda Code: 5517526 Malossi Force Master 2 electronic control unit for injection vehicles The Force Master ECU allows you to vary the injection to adapt perfectly to the Malossi and original 4 stroke cylinders. Carburation adjustment ± 20% at min/average/max Rev limiter : + 1000 RPM Original 9,000...
Reference: 248.063
Brand: POLINI
Polini variator belt for Honda 50 Zoomer Code 248.063 Application: Honda, Honda Ruckus 50, Honda Zoomer 50, Honda Metropolitan 50 4T
Reference: 4519021
Brand: Malossi
Malossi Sport windshield for Honda Sh 4519021 Malossi code: 4519021. Dark smoke colored screen. Length 39 cm. Height 27.5 cm. Thickness 0.3 cm.
Water temperature sensor with 1/8GAS 45 cm thread A2102. This NTC technology sensor with 1 / 8GAS thread can be connected to the motor head if the motor has a hole designed to install this sensor.
Note: This sensor must be used with an A3301 extension cable or A2190 hub.
