Xmotorstore Payments
45 cm candle temperature sensor A2104. This normal version NTC sensor must be installed with a 14mm diameter spark plug.
Caution: It is important to remove the sealing washer from the spark plug before installation.
Note: This sensor must be used with an A3301 extension cable or A2190 hub.
45 cm candle temperature sensor A2104. This normal version NTC sensor must be installed with a 14mm diameter spark plug.
Caution: It is important to remove the sealing washer from the spark plug before installation.
Note: This sensor must be used with an A3301 extension cable or A2190 hub.
Reference: A3301
Brand: Alfano
Extension for "NTC" sensors Alfano 135 cm A3301. Extension of "NTC" technology to connect all Alfano NTC sensors.
Reference: 1610600
Brand: Malossi
Malossi phbh 30 bd fuel system for Vespa 1610600 Malossi code: 1610600 Malossi phbh 30 bd fuel system direct to the crankcase for Vespa Px 80cc, 125cc, 150cc Application: Malossi fuel system for Vespa PX 125 2T euro 0-1 Malossi fuel system for Vespa PX 125 2T euro 2 (VLX2M) Malossi fuel system for Vespa PX 125 2T euro 3 Malossi fuel system for Vespa PX...
Reference: 52 9150
Brand: Malossi
Malossi clutch shoes for automatic clutch 52 9150 Malossi code: 52 9150 Malossi clutch shoes for automatic clutch Fly clutch
Reference: 144.045.002
Brand: POLINI
Polini Xp4 exhaust gasket. Polini Code: 144.045.002 Polini exhaust gasket for: Polini, Polini XP4T 110
Reference: 31 8460
Brand: Malossi
Malossi MHR cylinder kit diameter 47.6 in aluminum with pin diameter 12 Malossi code: 31 8460 Malossi cylinder kit for APRILIA AREA 51 50 2T LC. Fit only with Malossi crankshaft 53 8009. Malossi cylinder kit for APRILIA GULLIVER 50 2T LC. Fit only with Malossi crankshaft 53 8009. Malossi cylinder kit for APRILIA RALLY 50 2T LC (MINARELLI). Fit only with...
Reference: 133.1012
Brand: POLINI
Polini cylinder kit for Minarelli AM6 diameter 52 mm stroke 44 mm. Polini Code: 133.1012
Reference: 01.SB.0604.L
Brand: Ohvale
Ohvale Dish washer clutch Code: 01.SB.0604.L
Reference: 51 8752
Brand: Malossi
Malossi Multivar 51 8752 Variator for Peugeot Code: 51 8752 Malossi Multivar variator for scooters. Multivar is very simple to apply and easy to operate. It is studied in every detail and tested on each specific application. With such a sophisticated variator, your scooter will acquire snap, shift linearity and greater mechanical "tranquility" in gear,...
Reference: 31 5102
Brand: Malossi
Malossi Cylinder Diameter 65 in Aluminum H2O Malossi Code: 3111139
Reference: 96482501AA
Brand: Ducati
Ducati Performance complete racing exhaust by Akrapovic for the Ducati Multistrada V4, V4 S and Pikes Peak model 2025. Made of titanium with black end cap and dedicated mapping. Original Ducati product.
Reference: 252.0014
Brand: POLINI
Piaggio zip 50cc exhaust manifold gasket. Polini code: 252.0014
Reference: 250.039
Brand: POLINI
Polini clutch bell for Piaggio Evolution model diameter 120 mm Code 250.039 This Polini clutch bell is compatible as an original spare. Spare parts for Polini Evolution P.R.E. Diameter: 120 mm Weight: 670 gr Application: Piaggio, Piaggio Zip 50 2T SP H2O
Reference: 5519933
Brand: Malossi
Malossi electronic control unit Force Master 2.1 5519933 Malossi code: 5519933 Carburetion Adjustment ±14% at min/mid/max Rev Limiter: 9,250 RPM 4 different mappings: Curve 0 (125 cc vehicles): original exhaust, Malossi cylinder, original head, original camshaft, original filter Curve 1 (125 cc vehicles): Malossi exhaust with dB-killer, Malossi cylinder,...
Reference: 174.2028
Brand: POLINI
Polini sintered brake pads for Aprilia Code: 174.2028 Application: Aprilia, Aprilia Habana 125, Aprilia Leonardo 125/150, Aprilia Scarabeo 100 2T / 100 4T, Aprilia SR 125/150, Aprilia Mojito 125 RY
Reference: 2013072
Brand: Malossi
Original Malossi kit with exhaust flange and connector. Code 2013072. Ensures proper fit and gas seal for performance exhausts.
Reference: 01.SW.0201.L
Brand: Ohvale
Ohvale Gamp shaft completeCode: 01.SW.0201.L
Reference: 01.TE.0041.L
Brand: Ohvale
Front engine mount Ohvale 110 4S EVO 01.TE.0041.L
45 cm candle temperature sensor A2104. This normal version NTC sensor must be installed with a 14mm diameter spark plug.
Caution: It is important to remove the sealing washer from the spark plug before installation.
Note: This sensor must be used with an A3301 extension cable or A2190 hub.
