Xmotorstore Payments
There are 8147 products.
Reference: 201.1501
Brand: POLINI
Polini carburettor 15 Cp wire air starter Maximum jet 70 Minimum Jet 36 Needle 14/22 24x30 valve Pulverizer bush d.2,6 Polini Code: 201.1501
Reference: 201.1500
Brand: POLINI
Polini Cp carburettor diameter 15 knob air starter 40% reduced weight compared to traditional carburetors performance at the highest level racing use Maximum jet 70 Minimum Jet 36 Needle 14/22 24x30 valve Pulverizer bush d.2,6 Polini Code: 201.1500
Reference: A8016
Brand: GIMOTO
Gimoto level 2 approved motorcycle back protector. Professional motorcycle back protector approved EN 1621-2: 2014, made of a flexible material with excellent kinetic energy absorption properties, the practical elastic band with velcro at the waist allows the rider to make all movements without feeling the slightest discomfort. Professional back...
Reference: 2151
Brand: DELLORTO
Carburetor sha 16/16 Dellorto code 2151. ENGINE CONNECTION: from 21 to 19 AIR FILTER CONNECTION: from 59 JET: from 82 FLOAT: 3.5 gr Original Dellorto carburetor sha 16 16. Original carburetor Made in Italy. Dellorto: 02151 Sha 16 16.
Reference: 2043
Brand: DELLORTO
Dell'orto SHA 15/15 carburettor with filter, the sha 15 15 carburettor is dedicated to low displacement mopeds. Sha 15/15 calibrations: Motor connection: from 21 to 17 mm Air filter attachment: 59 For engines: 2-stroke two-stroke Air start: lever Float: 3.5 gr Dellorto Code: 02043
Reference: 001002R014A0
Brand: DM
Pair of DM minimoto front wheel spacers. DM Code: 001002R014A0
Reference: 001002R01400
Brand: DM
Minimoto front wheel pin Dm for 25 and 22 mm diameter stems. DM Code: 001002R01400
Reference: 001002R003C0
Brand: DM
Hull spacer kit Dm 5 pieces. Dm code: 001002R003C0
Reference: 001002R003B0
Brand: DM
rubber kit for fairing Dm 5 pieces. Suitable for original fairings, they allow to reduce the vibrations on the fairing. DM Code: 001002R003B0
Reference: 001002R003A0
Brand: DM
Anti-vibration inserts kit for DM 3-piece rear fender. DM Code: 001002R003A0
Reference: 001002R002B0
Brand: DM
Conical spacer on the crown side DM, the spacer must be inserted between the swingarm and the wheel bearing with the diameter of the narrowest cone towards the bearing. The wheel spacer Dm has the following measures: Hole diameter 10 mm Outside diameter 24 mm Outside diameter narrow part 15 mm Spacer thickness 10 mm Dm code: 001002R002B0
Reference: 112.486.32
Brand: GRC
GRC chain tool replacement tip, total pin length 26 mm, thread length 20 mm, tip length 6 mm, thread diameter 8 mm. Grc Code: 112.486.32
