Xmotorstore Payments
Malossi Rs24 rear shock absorber 4612962
Malossi code: 4612962
Malossi rear Rs24 shock absorber, wheelbase 290 mm Regenerable oil-pneumatic shock absorber with bilamellar piston and diaphragm compensation.
-Piston Ø 36 mm with two independent disc packs: one in extension and one in compression; harmonic steel lamellar system with leaf spring configuration
-Piston guide shoe of the LUBRIFLON-PTFE B70 type (bronze filled modified compound)
- Sliding on DU GUIDE bush (composite obtained by sintering a layer of spheroidal bronze on a suitably processed mild steel strip and with subsequent impregnation and coating with a mixture of PTFE+PB)
- Scraper ring in SEALTHANE grade 9345 polyester resin
-Shock absorber rod Ø 14 mm in hardened and tempered 38NCD4 alloy steel with hard chrome deposit 25/30 micron thick (surface hardness of the shaft not yet treated HRC 55/60)
Malossi shock absorber for:
Malossi shock absorber for Aprilia RX 50 2T LC 2007 onwards (Derbi D50B0).
Malossi shock absorber for Aprilia SX 50 2T LC 2007 onwards (Derbi D50B0).
Malossi shock absorber for Derbi Senda EVO SM 50 2T LC (D50B0).
Malossi shock absorber for Derbi Senda 50 2T LC (EBE050 - EBS050).
Malossi shock absorber for Derbi Senda X-RACE R - X-RACE SM 50 2T LC (D50B0).
Malossi shock absorber for Derbi Senda X-TREME R - X-TREME SM 50 2T LC (D50B0).
Malossi shock absorber for Gilera RCR - SMT 50 2T LC (Derbi D50B0).
Reference: 215.0450
Brand: POLINI
Polini 360 degree intake manifold sleeve 35mm. Polini Code: 215.0450
Reference: 210.0074
Brand: POLINI
Polini crankshaft pin 12 solid shoulders for Piaggio Ciao. Polini code: 210.0074 The new Polini crankshaft with Ø 12 full shoulder pin is offered in exclusive combination with the Polini For Race lamellar crankcase. The Polini For Race Ø 12 crankshafts for Piaggio Ciao and SI have forged and copper-plated connecting rods and are supplied complete with the...
Reference: 6116215
Brand: Malossi
Malossi X K belt strap for maxi scooter 18.8x10.6x814 mm angle 28 Malossi code: 6116215 Malossi belt for APRILIA LEONARDO 125 4T LC Malossi belt for APRILIA LEONARDO 150 4T LC Malossi belt for APRILIA SCARABEO 125 4T LC (ROTAX) Malossi belt for APRILIA SCARABEO 150 4T LC (ROTAX) Malossi belt for APRILIA SCARABEO 200 4T LC (ROTAX) Malossi belt for BETA...
Reference: 203.0133
Brand: POLINI
Peugeot Buxy 50cc 2t air filter. Polini Code: 203.0133
Reference: 209.0437
Brand: POLINI
Polini gasket series diameter 47.6 mm 209.0437 Code: 209.0437 Polini gasket set for Yamaha-Mbk Booster Polini gaskets set for: Aprilia, Aprilia Amico 50, Aprilia SR 50, Italjet, Italjet Pista 50, Mbk, Mbk Booster 50, Mbk Stunt 50, Yamaha, Yamaha Bw's 50, Yamaha Slider 50, Yamaha Spy 50, Polini
Reference: 6217150
Brand: Malossi
Malossi brake disc external diameter 250 - thickness 3.5 mm for fork kit F32S and F37R for Gilera Runner from 2006 Malossi code: 6217150 Malossi brake disc for GILERA RUNNER PureJet 50 2T LC 2006 Replacement for Malossi FORK KITS 4613086, 4613090, 4616136 discontinued. Malossi brake disc for GILERA RUNNER SP 50 2T LC 2006 Replacement for Malossi FORK KITS...
Reference: 144.225.001
Brand: POLINI
Polini water pocket connector Polini water pocket fitting for: Bultaco, Bultaco Astro 50, Bultaco Lobito 50, Derbi, Derbi GPR 50, Derbi Senda 50 DRD R, Derbi Senda 50 Extreme, Derbi Senda 50 R, Gilera, Gilera SMT 50, Gilera RCR 50, Gilera GSM 50, Gilera H @ K, Gilera ZULU, Polini, Aprilia, Aprilia SR 50 2T R, Aprilia SR 50 2T Factory, Piaggio, Piaggio...
Reference: 5515721
Brand: Malossi
Lambda emulator TC UNIT O2 Malossi controller 5515721 Code: 5515721 To further optimize carburetion and transient performance, the use of the O2 controller is recommended. In the latest generation motorbikes, the control unit, thanks to the lambda probe, is able to correct the quantity of fuel that must be injected so that the carburetion is constant,...
Reference: 243.108
Brand: POLINI
Polini contrast spring for Sym Cruisym 250/300 Code: 243.108 Application: Sym, Sym Joymax 250/300, Sym GTS, RV 250, Sym Citycom 300, Sym Cruisym 250/300 E4 from 2017, Tgb, Tgb X Motion 250
Reference: A2153
Brand: Alfano
Water temperature sensor 1/8 GAS 40 cm A2153. This 1 / 8GAS threaded thermocouple K-technology sensor can be connected to the motor head if the motor has a hole designed to install this sensor. Note: This sensor must be used with an A3401 extension cable or A2190 hub.
Reference: Renegade125Lem
Brand: Lem motor
Quad Lem Renegade 125cc 4t. 4-stroke single-cylinder engine with rear. Displacement 125cc unleaded petrol fuel Electric start Type of automatic transmission Chain transmission Motorcycle dimensions 1300 * 790 * 640 mm saddle height 71 cm Average weight 75kg Front and rear tires. 18 / 9-8 18 / 7-8 Front hydraulic disc brake Rear hydraulic disc brake -...
Reference: MC9SF
Brand: HJC
Hjc i100 Beis helmet i100 brings a change to your everyday flip-up helmet. This modular helmet has a full rotation chin guard that can be used in both open and full configuration thanks to the double P / J homologation. An easy to use integrated sun VISOR (Dark Smoke) is operated by a cable and is located on the lower left side of the shell. This shell is...
Reference: 5111324
Brand: Malossi
Malossi Multivar 2000 5111324 variator Code: 5111324
Reference: 01.AS.0304.L
Brand: Ohvale
Ohvale Conical needle X 71 4^ Code: 01.AS.0304.L
Reference: 215.0230
Brand: POLINI
Intake manifold Vespa Ets-Pk-Xl-Hp 24mm 3 holes. Polini Code: 215.0230 VESPA: VESPA 125 2T PK - VESPA 125 2T XL - VESPA 125 2T ETS - VESPA 50 2T HP, FL2 - VESPA 50 2T PK - VESPA 50 2T XL
Reference: Ohvale gp-7
Brand: Ohvale
Ohvale gp-7 250 cc 4t. Ohvale Gp-7 250 cc 4t 17 inches. A new Ohvale to experience new emotions. Ohvale GP-7 is the new Ohvale bike for the new GP Junior class, the project born from the collaboration between the Italian Motorcycling Federation and Ohvale for the 2025 CIV Junior sports season. A bike that looks to the future of motorsport, with new...
Malossi Rs24 rear shock absorber 4612962
Malossi code: 4612962
Malossi rear Rs24 shock absorber, wheelbase 290 mm Regenerable oil-pneumatic shock absorber with bilamellar piston and diaphragm compensation.
-Piston Ø 36 mm with two independent disc packs: one in extension and one in compression; harmonic steel lamellar system with leaf spring configuration
-Piston guide shoe of the LUBRIFLON-PTFE B70 type (bronze filled modified compound)
- Sliding on DU GUIDE bush (composite obtained by sintering a layer of spheroidal bronze on a suitably processed mild steel strip and with subsequent impregnation and coating with a mixture of PTFE+PB)
- Scraper ring in SEALTHANE grade 9345 polyester resin
-Shock absorber rod Ø 14 mm in hardened and tempered 38NCD4 alloy steel with hard chrome deposit 25/30 micron thick (surface hardness of the shaft not yet treated HRC 55/60)
